[PATCH 3/8] PCI: rockchip: Fixed endpoint controller Configuration Request Retry Status

[Rick Wertenbroek]

The endpoint was left in the config mode after probe, this would mean the
core would send configuration requestion retry status (CRS) messages back
to the root complex. The conf_en bit should be asserted after probe. This
is documented in section 17.5.8.1.2 of the RK3399 TRM.

Signed-off-by: Rick Wertenbroek <rick.wertenbroek at gmail.com>
---
 drivers/pci/controller/pcie-rockchip-ep.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/pci/controller/pcie-rockchip-ep.c b/drivers/pci/controller/pcie-rockchip-ep.c
index 9b835377b..4c84e403e 100644
--- a/drivers/pci/controller/pcie-rockchip-ep.c
+++ b/drivers/pci/controller/pcie-rockchip-ep.c
@@ -623,6 +623,8 @@ static int rockchip_pcie_ep_probe(struct platform_device *pdev)
 
 	ep->irq_pci_addr = ROCKCHIP_PCIE_EP_DUMMY_IRQ_ADDR;
 
+	rockchip_pcie_write(rockchip, PCIE_CLIENT_CONF_ENABLE, PCIE_CLIENT_CONFIG);
+
 	return 0;
 err_epc_mem_exit:
 	pci_epc_mem_exit(epc);
-- 
2.25.1