[PATCH AUTOSEL 6.1 06/24] arm64: dts: rockchip: fix probe of analog sound card on rock-3a

[Sasha Levin]

From: Jonas Karlman <jonas at kwiboo.se>

[ Upstream commit 1104693cdfcd337e73ab585a225f05445ff7a864 ]

The following was observed on my Radxa ROCK 3 Model A board:

  rockchip-pinctrl pinctrl: pin gpio1-9 already requested by vcc-cam-regulator; cannot claim for fe410000.i2s
  ...
  platform rk809-sound: deferred probe pending

Fix this by supplying a board specific pinctrl with the i2s1 pins used
by pmic codec according to the schematic [1].

[1] https://dl.radxa.com/rock3/docs/hw/3a/ROCK-3A-V1.3-SCH.pdf

Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
Acked-by: Michael Riesch <michael.riesch at wolfvision.net>
Link: https://lore.kernel.org/r/20230115211553.445007-1-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko at sntech.de>
Signed-off-by: Sasha Levin <sashal at kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
index 44313a18e484e..bab46db2b18cd 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
@@ -521,6 +521,8 @@ &i2s0_8ch {
 };
 
 &i2s1_8ch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_lrcktx &i2s1m0_sdi0 &i2s1m0_sdo0>;
 	rockchip,trcm-sync-tx-only;
 	status = "okay";
 };
-- 
2.39.0