[PATCH v2 4/9] PCI: rockchip: Add poll and timeout to wait for PHY PLLs to be locked

[Damien Le Moal]

On 2/14/23 23:08, Rick Wertenbroek wrote:
> The RK3399 PCIe controller should wait until the PHY PLLs are locked.
> Add poll and timeout to wait for PHY PLLs to be locked. If they cannot
> be locked generate error message and jump to error handler. Accessing
> registers in the PHY clock domain when PLLs are not locked causes hang
> The PHY PLLs status is checked through a side channel register.
> This is documented in the TRM section 17.5.8.1 "PCIe Initialization
> Sequence".
> 
> Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller")
> Cc: stable at vger.kernel.org
> Signed-off-by: Rick Wertenbroek <rick.wertenbroek at gmail.com>

A couple of nits below. Otherwise:

Reviewed-by: Damien Le Moal <damien.lemoal at opensource.wdc.com>
Tested-by: Damien Le Moal <damien.lemoal at opensource.wdc.com>

> ---
>  drivers/pci/controller/pcie-rockchip.c | 16 ++++++++++++++++
>  drivers/pci/controller/pcie-rockchip.h |  2 ++
>  2 files changed, 18 insertions(+)
> 
> diff --git a/drivers/pci/controller/pcie-rockchip.c b/drivers/pci/controller/pcie-rockchip.c
> index 990a00e08..5f2e2dd5d 100644
> --- a/drivers/pci/controller/pcie-rockchip.c
> +++ b/drivers/pci/controller/pcie-rockchip.c

[...]

> +	err = readx_poll_timeout(rockchip_pcie_read_addr, PCIE_CLIENT_SIDE_BAND_STATUS,

Nit: long line. Split it after the first comma.

> +		regs, !(regs & PCIE_CLIENT_PHY_ST), RK_PHY_PLL_LOCK_SLEEP_US,
> +		RK_PHY_PLL_LOCK_TIMEOUT_US);
> +

Nit: no need for this blank line.

> +	if (err) {
> +		dev_err(dev, "PHY PLLs could not lock, %d\n", err);
> +		goto err_power_off_phy;
> +	}
> +

-- 
Damien Le Moal
Western Digital Research