[PATCH v2 0/2] drm/rockchip: dw_hdmi: Add 4k at 30 support

[Dan Johansen]

Den 26.09.2022 kl. 12.30 skrev Michael Riesch:
> Hi Sascha,
>
> On 9/26/22 10:04, Sascha Hauer wrote:
>> This series adds support for 4k at 30 to the rockchip HDMI controller. This
>> has been tested on a rk3568 rock3a board. It should be possible to add
>> 4k at 60 support the same way, but it doesn't work for me, so let's add
>> 4k at 30 as a first step.
>> 														     Sascha
>>
>> Changes since v1:
>> - Allow non standard clock rates only on Synopsys phy as suggested by
>>    Robin Murphy
>>
>> Sascha Hauer (2):
>>    drm/rockchip: dw_hdmi: relax mode_valid hook
>>    drm/rockchip: dw_hdmi: Add support for 4k at 30 resolution
>>
>>   drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 34 ++++++++++++++++-----
>>   1 file changed, 27 insertions(+), 7 deletions(-)
> Thanks for the v2! On a RK3568 EVB1 with a HP 27f 4k monitor
>
> Tested-by: Michael Riesch <michael.riesch at wolfvision.net>

Sadly this still doesn't give my display out on my 2k monitor. Not even 
just 1080p picture like the old current implementation does.

>
> Best regards,
> Michael
>
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip
-- 
Kind regards
*Dan Johansen*
Project lead of the *Manjaro ARM* project
Manjaro-ARM <https://manjaro.org>