[BUG] [PATCH v2 1/2] clocksource: arm_global_timer: implement rate compensation whenever source clock changes
Johan Jonker
jbx6244 at gmail.com
Sun Oct 30 07:50:57 PDT 2022
Hi Andrea,
Some MK80 rk3066a details:
>From rk3xxx.dtsi:
global_timer: global-timer at 1013c200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0x1013c200 0x20>;
interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
clocks = <&cru CORE_PERI>;
};
===
rk3066a clk_summery:
enable prepare protect duty hardware
clock count count count rate accuracy phase cycle enable
-------------------------------------------------------------------------------------------------------
xin24m 8 8 0 24000000 0 0 50000 Y
pll_apll 1 1 0 1416000000 0 0 50000 Y
apll 1 1 0 1416000000 0 0 50000 Y
armclk 2 2 0 1416000000 0 0 50000 Y
core_peri 2 2 0 177000000 0 0 50000 Y
===
Before your patch:
[ 0.000000] >>>> GT gt_clk_rate:75000000
[ 0.000000] >>>> GT gt_clocksource_init ctrl :00000001
[ 0.000105] >>>> GT gt_clockevent_shutdown ctrl:00000001
[ 0.000128] >>>> GT gt_compare_set delta :750000
[ 0.000143] >>>> GT gt_compare_set ctrl :0000000f
[ 0.000412] >>>> GT gt_clockevent_shutdown ctrl:00000001
[ 0.000444] >>>> GT gt_clockevent_shutdown ctrl:00000001
===
After your patch with prescaler 1:
[ 0.000000] >>>> GT CONFIG_ARM_GT_INITIAL_PRESCALER_VAL:2
[ 0.000000] >>>> GT gt_clk_rate :75000000
[ 0.000000] >>>> GT gt_target_rate :37500000
[ 0.000000] >>>> GT gt_clocksource_init ctrl :00000101
[ 0.000002] sched_clock: 64 bits at 38MHz, resolution 26ns, wraps every 2199023255540ns
[ 0.000049] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x8a60dd6a9, max_idle_ns: 440795204056 ns
[ 0.000104] >>>> GT gt_clockevent_shutdown ctrl:00000101
[ 0.000129] >>>> GT gt_compare_set delta :375000
[ 0.000143] >>>> GT gt_compare_set ctrl :0000010f
[ 0.000175] Switching to timer-based delay loop, resolution 26ns
[ 0.000396] >>>> GT gt_clockevent_shutdown ctrl:00000101
[ 0.000428] >>>> GT gt_clockevent_shutdown ctrl:00000101
[ 0.001785] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[ 0.002136] Ignoring duplicate/late registration of read_current_timer delay
[ 13.783289] calling dt_cpufreq_platdrv_init+0x0/0x28 @ 1
[ 13.809106] >>>> GT gt_clk_rate_change_cb ndata->new_rate:78000000
[ 13.809148] >>>> GT gt_clk_rate_change_cb gt_target_rate :37500000
[ 13.833691] >>>> GT gt_clk_rate_change_cb psv 1 :2
[ 13.857882] >>>> GT gt_clk_rate_change_cb MAX_F_ERR :50
[ 13.884605] >>>> GT gt_clk_rate_change_cb abs(gt_target_rate - (ndata->new_rate / psv)):1500000
[ 13.911207] >>>> GT NOTIFY_BAD 1
[ 13.938409] >>>> GT gt_write_presc psv:0
[ 13.959266] >>>> GT gt_write_presc reg:00000001
[ 13.980873] cpu cpu0: _opp_config_clk_single: failed to set clock rate: -16
[ 14.074809] cpufreq: __target_index: Failed to change cpu frequency: -16
[ 14.124490] ------------[ cut here ]------------
[ 14.168380] kernel BUG at drivers/cpufreq/cpufreq.c:1480!
===
After your patch with prescaler 2:
[ 0.000000] >>>> GT CONFIG_ARM_GT_INITIAL_PRESCALER_VAL:2
[ 0.000000] >>>> GT gt_clk_rate :75000000
[ 0.000000] >>>> GT gt_target_rate :37500000
[ 0.000000] >>>> GT gt_clocksource_init ctrl :00000101
[ 0.000002] sched_clock: 64 bits at 38MHz, resolution 26ns, wraps every 2199023255540ns
[ 0.000049] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x8a60dd6a9, max_idle_ns: 440795204056 ns
[ 0.000104] >>>> GT gt_clockevent_shutdown ctrl:00000101
[ 0.000129] >>>> GT gt_compare_set delta :375000
[ 0.000143] >>>> GT gt_compare_set ctrl :0000010f
[ 0.000175] Switching to timer-based delay loop, resolution 26ns
[ 0.000396] >>>> GT gt_clockevent_shutdown ctrl:00000101
[ 0.000428] >>>> GT gt_clockevent_shutdown ctrl:00000101
[ 0.001785] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[ 0.002136] Ignoring duplicate/late registration of read_current_timer delay
[ 13.783289] calling dt_cpufreq_platdrv_init+0x0/0x28 @ 1
[ 13.809106] >>>> GT gt_clk_rate_change_cb ndata->new_rate:78000000
[ 13.809148] >>>> GT gt_clk_rate_change_cb gt_target_rate :37500000
[ 13.833691] >>>> GT gt_clk_rate_change_cb psv 1 :2
[ 13.857882] >>>> GT gt_clk_rate_change_cb MAX_F_ERR :50
[ 13.884605] >>>> GT gt_clk_rate_change_cb abs(gt_target_rate - (ndata->new_rate / psv)):1500000
[ 13.911207] >>>> GT NOTIFY_BAD 1
[ 13.938409] >>>> GT gt_write_presc psv:0
[ 13.959266] >>>> GT gt_write_presc reg:00000001
[ 13.980873] cpu cpu0: _opp_config_clk_single: failed to set clock rate: -16
[ 14.074809] cpufreq: __target_index: Failed to change cpu frequency: -16
[ 14.124490] ------------[ cut here ]------------
[ 14.168380] kernel BUG at drivers/cpufreq/cpufreq.c:1480!
On 10/27/22 15:37, Andrea Merello wrote:
> Il giorno lun 17 ott 2022 alle ore 10:03 Johan Jonker
> <jbx6244 at gmail.com> ha scritto:
>>
>> Hi Andrea,
>>
>> Your patch contribution causes a kernel panic on MK808 with Rockchip rk3066a SoC.
>> Would you like to contribute to fix this issue?
>
> Hi! Thank you for reporting this; I'm definitely interested in
> investigating this issue.
>
>> The psv variable divides with 0 and more things might be wrong.
>> A revert makes it work again.
>
> Hum, good point: it's probably worth adding a check in the LOC you
> pointed out and eventually returning NOTIFY_BAD.. Note however that
> this would prevent the division by zeroed-psv (which is really
> desirable), but it wouldn't make all magically work - so it's probably
> worth understanding what's happening.. :
>
> I'm not familiar with your SoC; is it like the Zynq i.e. when enabling
> cpu frequency scaling then the clock source feeding the ARM global
> timer keeps changing rate? If the rate-change callback has run (and it
> calculated a zero psv) then it seems the case.
>
> If this is really the case, then I'd say that the frequency scaling
> needed to be disabled (i.e. locked out) when the ARM global timer was
> in use without my patch (otherwise your clocksource would be also
> unstable), while to take advantage of my patch a reasonable
> CONFIG_ARM_GT_INITIAL_PRESCALER_VAL should be set (and hopefully this
> prevents psv to become zero).
>
> IOW, in this case, I would expect KConfig not letting enabling
> frequency scaling and ARM global timer together (IIRC that was what
> Zynq did) in case my patch is not there, or otherwise defining at
> least a good default value for CONFIG_ARM_GT_INITIAL_PRESCALER_VAL,
> that make it possible to swing the prescaler in a range wide enough.
>
> How's CONFIG_ARM_GT_INITIAL_PRESCALER_VAL set in your kernel
> configuration? Maybe tweaking with it prevents the problem?
>
> On the contrary, in case your SoC doesn't vary the ARM global timer
> clock source when scaling CPU frequency, then I don't understand why
> the rate-change notification callback, where the psv is calculated, is
> ever called (although I admit that I'm starting to wonder whether it
> is maybe called one time anyway).. But even if it is, then the clock
> rate should be the very same, so I would expect the psv to be
> calculated as non-zero anyway.. Or am I missing some case in which
> approximations can lead to zero?
>
> BTW I'm not really sure about what's going on here: I cannot directly
> correlate the Oops you attached below to the LOC you pointed out. How
> did you track down the problem to that?
>
> Thanks
> Andrea
>
>>
>> Johan
>>
>> =====
>>
>> [ 13.087809] ------------[ cut here ]------------
>> [ 13.110701] kernel BUG at drivers/cpufreq/cpufreq.c:1480!
>> [ 13.134378] Internal error: Oops - BUG: 0 [#1] SMP ARM
>> [ 13.157793] Modules linked in:
>> [ 13.178760] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.0.0-next-20221013 #1
>> [ 13.205990] Hardware name: Rockchip (Device Tree)
>> [ 13.228793] PC is at cpufreq_online+0x8fc/0xa1c
>> [ 13.251421] LR is at __wake_up_common_lock+0x98/0xc4
>> [ 13.274536] pc : [<c06883d8>] lr : [<c0171c50>] psr: a0000013
>> [ 13.299046] sp : f0821c50 ip : f0821b70 fp : f0821c9c
>> [ 13.322445] r10: 00000000 r9 : 00000000 r8 : c0f9b800
>> [ 13.345887] r7 : 000493e0 r6 : c115ef18 r5 : c1005058 r4 : c2055e00
>> [ 13.370714] r3 : b4aeb193 r2 : b4aeb193 r1 : 60000013 r0 : fffffff0
>> [ 13.395373] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
>> [ 13.420948] Control: 10c5387d Table: 6000404a DAC: 00000051
>> [ 13.444914] Register r0 information: non-paged memory
>> [ 13.468230] Register r1 information: non-paged memory
>> [ 13.491289] Register r2 information: non-paged memory
>> [ 13.514135] Register r3 information: non-paged memory
>> [ 13.536767] Register r4 information: slab kmalloc-512 start c2055e00 pointer offset 0 size 512
>> [ 13.563712] Register r5 information: non-slab/vmalloc memory
>> [ 13.587158] Register r6 information: non-slab/vmalloc memory
>> [ 13.610385] Register r7 information: non-paged memory
>> [ 13.632699] Register r8 information: non-slab/vmalloc memory
>> [ 13.655529] Register r9 information: NULL pointer
>> [ 13.677204] Register r10 information: NULL pointer
>> [ 13.698865] Register r11 information: 2-page vmalloc region starting at 0xf0820000 allocated at kernel_clone+0xc0/0x3b0
>> [ 13.727678] Register r12 information: 2-page vmalloc region starting at 0xf0820000 allocated at kernel_clone+0xc0/0x3b0
>> [ 13.756320] Process swapper/0 (pid: 1, stack limit = 0x(ptrval))
>> [ 13.779523] Stack: (0xf0821c50 to 0xf0822000)
>> [ 13.800858] 1c40: 00000000 00000001 ef7c5050 00000001
>> [ 13.826719] 1c60: c10da900 00000002 c115ef18 c2055f20 c0942224 00000000 ef7c5050 c1004ec8
>> [ 13.852544] 1c80: c20d7b40 c10da884 c1005058 c1004f14 f0821cb4 f0821ca0 c0688590 c0687ae8
>> [ 13.878330] 1ca0: c10da570 c10cf8a8 f0821ce4 f0821cb8 c0595080 c0688524 c14f7958 c1645434
>> [ 13.904232] 1cc0: 00000000 b4aeb193 00000060 c10da900 c115ef18 c10da434 f0821d0c f0821ce8
>> [ 13.930231] 1ce0: c06859e0 c0594fdc c10da8ec ef7c5050 c20d7b40 00000002 c10da8ec ef7c5050
>> [ 13.956321] 1d00: f0821d8c f0821d10 c068b9a4 c068589c c0b161cc c1004ec8 00000000 c0b7b718
>> [ 13.982392] 1d20: c14e3400 00000000 c20d7b48 00000001 c033f608 c20da5d8 c20da688 c160c688
>> [ 14.008446] 1d40: c0b8bd28 00000001 c0c47d54 c111b000 f0821d84 00000000 00000000 b4aeb193
>> [ 14.034637] 1d60: c14e3410 c14e3410 00000000 c10da898 00000000 c20d7ab8 c0c47d54 c111b000
>> [ 14.060896] 1d80: f0821dac f0821d90 c0599424 c068b68c c14e3410 00000000 c10da898 00000000
>> [ 14.087313] 1da0: f0821dcc f0821db0 c0596cd0 c05993c4 c14e3410 c10da898 c14e3410 00000000
>> [ 14.113601] 1dc0: f0821de4 f0821dd0 c0596f8c c0596c04 c115dd68 c14e3410 f0821e04 f0821de8
>> [ 14.139950] 1de0: c0596fe8 c0596ec0 00000000 c14e3410 c10da898 c059741c f0821e2c f0821e08
>> [ 14.166351] 1e00: c0597490 c0596fb4 c1546ab4 c1004ec8 c10da898 c059741c c20d7ab8 c0c47d54
>> [ 14.192790] 1e20: f0821e5c f0821e30 c0594c2c c0597428 f0821e68 c14f7858 c1546ab4 b4aeb193
>> [ 14.219273] 1e40: c10da898 c10cf808 c20d7a80 00000000 f0821e6c f0821e60 c0596528 c0594bb4
>> [ 14.245875] 1e60: f0821e9c f0821e70 c0595e60 c0596508 c0b7b7c8 00000000 f0821e9c c10da898
>> [ 14.272550] 1e80: c1004ec8 c0c28e84 00000000 c1456854 f0821eb4 f0821ea0 c0597c80 c0595cc0
>> [ 14.299270] 1ea0: c110cec0 c1004ec8 f0821ec4 f0821eb8 c0599130 c0597c08 f0821ed4 f0821ec8
>> [ 14.326125] 1ec0: c0c28ea8 c0599110 f0821f4c f0821ed8 c0102180 c0c28e90 c03318e4 c0b14f30
>> [ 14.352912] 1ee0: c0b14f10 c0b14f00 c0b2bc78 c1004ec8 00000000 c0b855d0 00000006 00000006
>> [ 14.379805] 1f00: 00000000 c0b76eb0 c0c0055c c0bebf78 c0953a9c c154665b 00000000 b4aeb193
>> [ 14.406665] 1f20: c0181cb8 b4aeb193 000000c6 c0c82160 00000007 c0c47d34 c1546600 000000c6
>> [ 14.433661] 1f40: f0821f94 f0821f50 c0c01a48 c0102134 00000006 00000006 00000000 c0c0055c
>> [ 14.460621] 1f60: c0c0055c c0bebf78 c1588000 00004ec0 c096ea48 00000000 00000000 00000000
>> [ 14.487681] 1f80: 00000000 00000000 f0821fac f0821f98 c096ea6c c0c01884 00000000 c096ea48
>> [ 14.514695] 1fa0: 00000000 f0821fb0 c0100148 c096ea54 00000000 00000000 00000000 00000000
>> [ 14.541771] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
>> [ 14.568615] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
>> [ 14.595194] Backtrace:
>> [ 14.615207] cpufreq_online from cpufreq_add_dev+0x78/0x84
>> [ 14.638819] r10:c1004f14 r9:c1005058 r8:c10da884 r7:c20d7b40 r6:c1004ec8 r5:ef7c5050
>> [ 14.665198] r4:00000000
>> [ 14.685514] cpufreq_add_dev from subsys_interface_register+0xb0/0xfc
>> [ 14.710558] r5:c10cf8a8 r4:c10da570
>> [ 14.732076] subsys_interface_register from cpufreq_register_driver+0x150/0x2d8
>> [ 14.758094] r6:c10da434 r5:c115ef18 r4:c10da900
>> [ 14.780943] cpufreq_register_driver from dt_cpufreq_probe+0x324/0x49c
>> [ 14.806283] r6:ef7c5050 r5:c10da8ec r4:00000002
>> [ 14.829299] dt_cpufreq_probe from platform_probe+0x6c/0xc8
>> [ 14.853499] r10:c111b000 r9:c0c47d54 r8:c20d7ab8 r7:00000000 r6:c10da898 r5:00000000
>> [ 14.880388] r4:c14e3410
>> [ 14.901252] platform_probe from really_probe+0xd8/0x2bc
>> [ 14.925473] r7:00000000 r6:c10da898 r5:00000000 r4:c14e3410
>> [ 14.949898] really_probe from __driver_probe_device+0xd8/0xf4
>> [ 14.974546] r7:00000000 r6:c14e3410 r5:c10da898 r4:c14e3410
>> [ 14.998855] __driver_probe_device from driver_probe_device+0x40/0xd0
>> [ 15.024426] r5:c14e3410 r4:c115dd68
>> [ 15.046857] driver_probe_device from __driver_attach+0x74/0x120
>> [ 15.072380] r7:c059741c r6:c10da898 r5:c14e3410 r4:00000000
>> [ 15.097388] __driver_attach from bus_for_each_dev+0x84/0xc4
>> [ 15.122444] r9:c0c47d54 r8:c20d7ab8 r7:c059741c r6:c10da898 r5:c1004ec8 r4:c1546ab4
>> [ 15.150131] bus_for_each_dev from driver_attach+0x2c/0x30
>> [ 15.175532] r7:00000000 r6:c20d7a80 r5:c10cf808 r4:c10da898
>> [ 15.201134] driver_attach from bus_add_driver+0x1ac/0x1f8
>> [ 15.226772] bus_add_driver from driver_register+0x84/0x11c
>> [ 15.252559] r8:c1456854 r7:00000000 r6:c0c28e84 r5:c1004ec8 r4:c10da898
>> [ 15.279483] driver_register from __platform_driver_register+0x2c/0x34
>> [ 15.306523] r5:c1004ec8 r4:c110cec0
>> [ 15.329801] __platform_driver_register from dt_cpufreq_platdrv_init+0x24/0x28
>> [ 15.357500] dt_cpufreq_platdrv_init from do_one_initcall+0x58/0x20c
>> [ 15.384159] do_one_initcall from kernel_init_freeable+0x1d0/0x22c
>> [ 15.410635] r8:000000c6 r7:c1546600 r6:c0c47d34 r5:00000007 r4:c0c82160
>> [ 15.437567] kernel_init_freeable from kernel_init+0x24/0x144
>> [ 15.463573] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c096ea48
>> [ 15.491869] r4:00004ec0
>> [ 15.514022] kernel_init from ret_from_fork+0x14/0x2c
>> [ 15.539079] Exception stack(0xf0821fb0 to 0xf0821ff8)
>> [ 15.563943] 1fa0: 00000000 00000000 00000000 00000000
>> [ 15.592459] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
>> [ 15.620836] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000
>> [ 15.647222] r5:c096ea48 r4:00000000
>> [ 15.670196] Code: e1a00004 ebfff74d e3500000 0a00001a (e7f001f2)
>> [ 15.696086] ---[ end trace 0000000000000000 ]---
>> [ 15.720522] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
>> [ 15.748404] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---
>>
>>
>> On 4/6/21 15:00, Andrea Merello wrote:
>>> This patch adds rate change notification support for the parent clock;
>>> should that clock change, then we try to adjust the our prescaler in order
>>> to compensate (i.e. we adjust to still get the same timer frequency).
>>>
>>> This is loosely based on what it's done in timer-cadence-ttc. timer-sun51,
>>> mips-gic-timer and smp_twd.c also seem to look at their parent clock rate
>>> and to perform some kind of adjustment whenever needed.
>>>
>>> In this particular case we have only one single counter and prescaler for
>>> all clocksource, clockevent and timer_delay, and we just update it for all
>>> (i.e. we don't let it go and call clockevents_update_freq() to notify to
>>> the kernel that our rate has changed).
>>>
>>> Note that, there is apparently no other way to fixup things, because once
>>> we call register_current_timer_delay(), specifying the timer rate, it seems
>>> that that rate is not supposed to change ever.
>>>
>>> In order for this mechanism to work, we have to make assumptions about how
>>> much the initial clock is supposed to eventually decrease from the initial
>>> one, and set our initial prescaler to a value that we can eventually
>>> decrease enough to compensate. We provide an option in KConfig for this.
>>>
>>> In case we end up in a situation in which we are not able to compensate the
>>> parent clock change, we fail returning NOTIFY_BAD.
>>>
>>> This fixes a real-world problem with Zynq arch not being able to use this
>>> driver and CPU_FREQ at the same time (because ARM global timer is fed by
>>> the CPU clock, which may keep changing when CPU_FREQ is enabled).
>>>
>>> Signed-off-by: Andrea Merello <andrea.merello at gmail.com>
>>> Cc: Patrice Chotard <patrice.chotard at st.com>
>>> Cc: linux-kernel at vger.kernel.org
>>> Cc: linux-arm-kernel at lists.infradead.org
>>> Cc: Michal Simek <michal.simek at xilinx.com>
>>> Cc: Sören Brinkmann <soren.brinkmann at xilinx.com>
>>> ---
>>> drivers/clocksource/Kconfig | 13 +++
>>> drivers/clocksource/arm_global_timer.c | 122 +++++++++++++++++++++++--
>>> 2 files changed, 125 insertions(+), 10 deletions(-)
>>>
>>> diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
>>> index 39aa21d01e05..19fc5f8883e0 100644
>>> --- a/drivers/clocksource/Kconfig
>>> +++ b/drivers/clocksource/Kconfig
>>> @@ -358,6 +358,19 @@ config ARM_GLOBAL_TIMER
>>> help
>>> This option enables support for the ARM global timer unit.
>>>
>>> +config ARM_GT_INITIAL_PRESCALER_VAL
>>> + int "ARM global timer initial prescaler value"
>>> + default 1
>>> + depends on ARM_GLOBAL_TIMER
>>> + help
>>> + When the ARM global timer initializes, its current rate is declared
>>> + to the kernel and maintained forever. Should it's parent clock
>>> + change, the driver tries to fix the timer's internal prescaler.
>>> + On some machs (i.e. Zynq) the initial prescaler value thus poses
>>> + bounds about how much the parent clock is allowed to decrease or
>>> + increase wrt the initial clock value.
>>> + This affects CPU_FREQ max delta from the initial frequency.
>>> +
>>> config ARM_TIMER_SP804
>>> bool "Support for Dual Timer SP804 module" if COMPILE_TEST
>>> depends on GENERIC_SCHED_CLOCK && CLKDEV_LOOKUP
>>> diff --git a/drivers/clocksource/arm_global_timer.c b/drivers/clocksource/arm_global_timer.c
>>> index 88b2d38a7a61..60a8047fd32e 100644
>>> --- a/drivers/clocksource/arm_global_timer.c
>>> +++ b/drivers/clocksource/arm_global_timer.c
>>> @@ -31,6 +31,10 @@
>>> #define GT_CONTROL_COMP_ENABLE BIT(1) /* banked */
>>> #define GT_CONTROL_IRQ_ENABLE BIT(2) /* banked */
>>> #define GT_CONTROL_AUTO_INC BIT(3) /* banked */
>>> +#define GT_CONTROL_PRESCALER_SHIFT 8
>>> +#define GT_CONTROL_PRESCALER_MAX 0xF
>>> +#define GT_CONTROL_PRESCALER_MASK (GT_CONTROL_PRESCALER_MAX << \
>>> + GT_CONTROL_PRESCALER_SHIFT)
>>>
>>> #define GT_INT_STATUS 0x0c
>>> #define GT_INT_STATUS_EVENT_FLAG BIT(0)
>>> @@ -39,6 +43,7 @@
>>> #define GT_COMP1 0x14
>>> #define GT_AUTO_INC 0x18
>>>
>>> +#define MAX_F_ERR 50
>>> /*
>>> * We are expecting to be clocked by the ARM peripheral clock.
>>> *
>>> @@ -46,7 +51,8 @@
>>> * the units for all operations.
>>> */
>>> static void __iomem *gt_base;
>>> -static unsigned long gt_clk_rate;
>>> +struct notifier_block gt_clk_rate_change_nb;
>>> +static u32 gt_psv_new, gt_psv_bck, gt_target_rate;
>>> static int gt_ppi;
>>> static struct clock_event_device __percpu *gt_evt;
>>>
>>> @@ -96,7 +102,10 @@ static void gt_compare_set(unsigned long delta, int periodic)
>>> unsigned long ctrl;
>>>
>>> counter += delta;
>>> - ctrl = GT_CONTROL_TIMER_ENABLE;
>>> + ctrl = readl(gt_base + GT_CONTROL);
>>> + ctrl &= ~(GT_CONTROL_COMP_ENABLE | GT_CONTROL_IRQ_ENABLE |
>>> + GT_CONTROL_AUTO_INC | GT_CONTROL_AUTO_INC);
>>> + ctrl |= GT_CONTROL_TIMER_ENABLE;
>>> writel_relaxed(ctrl, gt_base + GT_CONTROL);
>>> writel_relaxed(lower_32_bits(counter), gt_base + GT_COMP0);
>>> writel_relaxed(upper_32_bits(counter), gt_base + GT_COMP1);
>>> @@ -123,7 +132,7 @@ static int gt_clockevent_shutdown(struct clock_event_device *evt)
>>>
>>> static int gt_clockevent_set_periodic(struct clock_event_device *evt)
>>> {
>>> - gt_compare_set(DIV_ROUND_CLOSEST(gt_clk_rate, HZ), 1);
>>> + gt_compare_set(DIV_ROUND_CLOSEST(gt_target_rate, HZ), 1);
>>> return 0;
>>> }
>>>
>>> @@ -177,7 +186,7 @@ static int gt_starting_cpu(unsigned int cpu)
>>> clk->cpumask = cpumask_of(cpu);
>>> clk->rating = 300;
>>> clk->irq = gt_ppi;
>>> - clockevents_config_and_register(clk, gt_clk_rate,
>>> + clockevents_config_and_register(clk, gt_target_rate,
>>> 1, 0xffffffff);
>>> enable_percpu_irq(clk->irq, IRQ_TYPE_NONE);
>>> return 0;
>>> @@ -232,9 +241,28 @@ static struct delay_timer gt_delay_timer = {
>>> .read_current_timer = gt_read_long,
>>> };
>>>
>>> +static void gt_write_presc(u32 psv)
>>> +{
>>> + u32 reg;
>>> +
>>> + reg = readl(gt_base + GT_CONTROL);
>>> + reg &= ~GT_CONTROL_PRESCALER_MASK;
>>> + reg |= psv << GT_CONTROL_PRESCALER_SHIFT;
>>> + writel(reg, gt_base + GT_CONTROL);
>>> +}
>>> +
>>> +static u32 gt_read_presc(void)
>>> +{
>>> + u32 reg;
>>> +
>>> + reg = readl(gt_base + GT_CONTROL);
>>> + reg &= GT_CONTROL_PRESCALER_MASK;
>>> + return reg >> GT_CONTROL_PRESCALER_SHIFT;
>>> +}
>>> +
>>> static void __init gt_delay_timer_init(void)
>>> {
>>> - gt_delay_timer.freq = gt_clk_rate;
>>> + gt_delay_timer.freq = gt_target_rate;
>>> register_current_timer_delay(>_delay_timer);
>>> }
>>>
>>> @@ -243,18 +271,81 @@ static int __init gt_clocksource_init(void)
>>> writel(0, gt_base + GT_CONTROL);
>>> writel(0, gt_base + GT_COUNTER0);
>>> writel(0, gt_base + GT_COUNTER1);
>>> - /* enables timer on all the cores */
>>> - writel(GT_CONTROL_TIMER_ENABLE, gt_base + GT_CONTROL);
>>> + /* set prescaler and enable timer on all the cores */
>>> + writel(((CONFIG_ARM_GT_INITIAL_PRESCALER_VAL - 1) <<
>>> + GT_CONTROL_PRESCALER_SHIFT)
>>> + | GT_CONTROL_TIMER_ENABLE, gt_base + GT_CONTROL);
>>>
>>> #ifdef CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
>>> - sched_clock_register(gt_sched_clock_read, 64, gt_clk_rate);
>>> + sched_clock_register(gt_sched_clock_read, 64, gt_target_rate);
>>> #endif
>>> - return clocksource_register_hz(>_clocksource, gt_clk_rate);
>>> + return clocksource_register_hz(>_clocksource, gt_target_rate);
>>> +}
>>> +
>>> +static int gt_clk_rate_change_cb(struct notifier_block *nb,
>>> + unsigned long event, void *data)
>>> +{
>>> + struct clk_notifier_data *ndata = data;
>>> +
>>> + switch (event) {
>>> + case PRE_RATE_CHANGE:
>>> + {
>>> + int psv;
>>> +
>>
>>> + psv = DIV_ROUND_CLOSEST(ndata->new_rate,
>>> + gt_target_rate);
>>> +
>>
>>> + if (abs(gt_target_rate - (ndata->new_rate / psv)) > MAX_F_ERR)
>>> + return NOTIFY_BAD;
>>
>> This psv variable can become a 0 divider.
>>
>>> +
>>> + psv--;
>>> +
>>> + /* prescaler within legal range? */
>>> + if (psv < 0 || psv > GT_CONTROL_PRESCALER_MAX)
>>> + return NOTIFY_BAD;
>>> +
>>> + /*
>>> + * store timer clock ctrl register so we can restore it in case
>>> + * of an abort.
>>> + */
>>> + gt_psv_bck = gt_read_presc();
>>> + gt_psv_new = psv;
>>> + /* scale down: adjust divider in post-change notification */
>>> + if (ndata->new_rate < ndata->old_rate)
>>> + return NOTIFY_DONE;
>>> +
>>> + /* scale up: adjust divider now - before frequency change */
>>> + gt_write_presc(psv);
>>> + break;
>>> + }
>>> + case POST_RATE_CHANGE:
>>> + /* scale up: pre-change notification did the adjustment */
>>> + if (ndata->new_rate > ndata->old_rate)
>>> + return NOTIFY_OK;
>>> +
>>> + /* scale down: adjust divider now - after frequency change */
>>> + gt_write_presc(gt_psv_new);
>>> + break;
>>> +
>>> + case ABORT_RATE_CHANGE:
>>> + /* we have to undo the adjustment in case we scale up */
>>> + if (ndata->new_rate < ndata->old_rate)
>>> + return NOTIFY_OK;
>>> +
>>> + /* restore original register value */
>>> + gt_write_presc(gt_psv_bck);
>>> + break;
>>> + default:
>>> + return NOTIFY_DONE;
>>> + }
>>> +
>>> + return NOTIFY_DONE;
>>> }
>>>
>>> static int __init global_timer_of_register(struct device_node *np)
>>> {
>>> struct clk *gt_clk;
>>> + static unsigned long gt_clk_rate;
>>> int err = 0;
>>>
>>> /*
>>> @@ -292,11 +383,20 @@ static int __init global_timer_of_register(struct device_node *np)
>>> }
>>>
>>> gt_clk_rate = clk_get_rate(gt_clk);
>>> + gt_target_rate = gt_clk_rate / CONFIG_ARM_GT_INITIAL_PRESCALER_VAL;
>>> + gt_clk_rate_change_nb.notifier_call =
>>> + gt_clk_rate_change_cb;
>>> + err = clk_notifier_register(gt_clk, >_clk_rate_change_nb);
>>> + if (err) {
>>> + pr_warn("Unable to register clock notifier\n");
>>> + goto out_clk;
>>> + }
>>> +
>>> gt_evt = alloc_percpu(struct clock_event_device);
>>> if (!gt_evt) {
>>> pr_warn("global-timer: can't allocate memory\n");
>>> err = -ENOMEM;
>>> - goto out_clk;
>>> + goto out_clk_nb;
>>> }
>>>
>>> err = request_percpu_irq(gt_ppi, gt_clockevent_interrupt,
>>> @@ -326,6 +426,8 @@ static int __init global_timer_of_register(struct device_node *np)
>>> free_percpu_irq(gt_ppi, gt_evt);
>>> out_free:
>>> free_percpu(gt_evt);
>>> +out_clk_nb:
>>> + clk_notifier_unregister(gt_clk, >_clk_rate_change_nb);
>>> out_clk:
>>> clk_disable_unprepare(gt_clk);
>>> out_unmap:
More information about the Linux-rockchip
mailing list