[PATCH v3 3/4] dt-bindings: arm: rockchip: Add SOQuartz Model A

[Krzysztof Kozlowski]

On 16/11/2022 12:53, Nicolas Frattaroli wrote:
> The SOQuartz Model A base board is a carrier board for the CM4
> form factor, designed around the PINE64 SOQuartz CM4 SoM.
> 
> The board sports "Model A" dimensions like the Quartz64 Model A,
> but is not to be confused with that.
> 
> As for I/O, it features USB 2 ports, Gigabit Ethernet, a PCIe 2
> x1 slot, HDMI, a 40-pin GPIO header, CSI/DSI connectors, an eDP
> flat-flex cable connector, a 12V DC barrel jack for power input
> and power/reset buttons as well as a microSD card slot.
> 
> Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas at gmail.com>
> ---


Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>

Best regards,
Krzysztof