[linux-next-v1 1/3] arm64: dts: rockchip: Fix gmac phy mode to rgmii on Rock 3A sbc

[Michael Riesch]

Hi Anand,

On 11/11/22 10:42, Anand Moon wrote:
> On rk356x ethernet phy support reduced media independent interface (RMII)
> and reduced gigabit media independent interface (RGMII).
> So set the phy mode to rgmii.
> 
> Signed-off-by: Anand Moon <linux.amoon at gmail.com>
> ---
>  arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
> index ea74ba32fbbd..72e410e3aca8 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
> @@ -253,7 +253,7 @@ &gmac1 {
>  	assigned-clock-rates = <0>, <125000000>;
>  	clock_in_out = "output";
>  	phy-handle = <&rgmii_phy1>;
> -	phy-mode = "rgmii-id";
> +	phy-mode = "rgmii";

What are you trying to fix here? If it ain't broken, don't fix it. I
would assume if you switch from rgmii-id to rgmii you need to adjust the
rx/tx-delays, otherwise this change does not make sense to me. Feel free
to point out what I am missing, though.

Best regards,
Michael

>  	pinctrl-names = "default";
>  	pinctrl-0 = <&gmac1m1_miim
>  		     &gmac1m1_tx_bus2