[PATCH] arm64: dts: rockchip: Add some pins for NanoPi4

[Robin Murphy]

The NanoPi4 boards have the RK808's always-on 32KHz clock wired to the
SoC, so have it claim the relevant pinctrl to actually enable the
CLK32K_IN input. The RK808's SLEEP pin is also wired to the SoC's
AP_PWROFF output, so we may as well claim that too.

Signed-off-by: Robin Murphy <robin.murphy at arm.com>
---
 arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
index 8c0ff6c96e03..cbb12cfd40be 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
@@ -267,7 +267,7 @@ rk808: pmic at 1b {
 		interrupt-parent = <&gpio1>;
 		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_int_l>;
+		pinctrl-0 = <&pmic_int_l>, <&ap_pwroff>, <&xin32k>;
 		rockchip,system-power-controller;
 		wakeup-source;
 
-- 
2.28.0.dirty