[PATCH 2/3 v4] dts: rockchip: Add #clock-cells value for rk805

[Chris Morgan]

From: Chris Morgan <macromorgan at hotmail.com>

Based on a brief discussion on the mailing list it was determined that
clock-cells should be a required parameter in the event that a consumer
of the clock gets added in an overlay.

Signed-off-by: Chris Morgan <macromorgan at hotmail.com>
---
 arch/arm/boot/dts/rv1108-elgin-r1.dts      | 1 +
 arch/arm/boot/dts/rv1108-evb.dts           | 1 +
 arch/arm64/boot/dts/rockchip/rk3328-a1.dts | 1 +
 3 files changed, 3 insertions(+)

diff --git a/arch/arm/boot/dts/rv1108-elgin-r1.dts b/arch/arm/boot/dts/rv1108-elgin-r1.dts
index f62c9f7af79d..0c99a5934ebf 100644
--- a/arch/arm/boot/dts/rv1108-elgin-r1.dts
+++ b/arch/arm/boot/dts/rv1108-elgin-r1.dts
@@ -72,6 +72,7 @@ rk805: pmic at 18 {
 		interrupt-parent = <&gpio0>;
 		interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>;
 		rockchip,system-power-controller;
+		#clock-cells = <0>;
 
 		vcc1-supply = <&vcc_sys>;
 		vcc2-supply = <&vcc_sys>;
diff --git a/arch/arm/boot/dts/rv1108-evb.dts b/arch/arm/boot/dts/rv1108-evb.dts
index fe5fc9bf75c9..46cad7cb94bf 100644
--- a/arch/arm/boot/dts/rv1108-evb.dts
+++ b/arch/arm/boot/dts/rv1108-evb.dts
@@ -85,6 +85,7 @@ rk805: pmic at 18 {
 		interrupt-parent = <&gpio0>;
 		interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>;
 		rockchip,system-power-controller;
+		#clock-cells = <0>;
 
 		vcc1-supply = <&vcc_sys>;
 		vcc2-supply = <&vcc_sys>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
index de2d3e88e27f..40bf808642b9 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
@@ -160,6 +160,7 @@ pmic at 18 {
 		pinctrl-0 = <&pmic_int_l>;
 		rockchip,system-power-controller;
 		wakeup-source;
+		#clock-cells = <0>;
 
 		vcc1-supply = <&vcc_sys>;
 		vcc2-supply = <&vcc_sys>;
-- 
2.25.1