[PATCH v3 5/7] arm64: dts: rockchip: add rk356x dwc3 usb3 nodes

[Michael Riesch]

Hi Peter,

On 2/28/22 15:10, Peter Geis wrote:
> On Mon, Feb 28, 2022 at 8:37 AM Michael Riesch
> <michael.riesch at wolfvision.net> wrote:
>>
>> Hi Peter,
>>
>> On 2/28/22 1:57 PM, Peter Geis wrote:
>>> [...]
>>>>> +
>>>>> +&usb_host0_xhci {
>>>>> +     phys = <&usb2phy0_otg>;
>>>>> +     phy-names = "usb2-phy";
>>>>> +     extcon = <&usb2phy0>;
>>>>
>>>> I wonder what the correct place for this extcon property is. You defined
>>>> it on SoC (RK3566) level, in my patch for the RK3568 EVB1 it is added on
>>>> board level. Is this common to all RK356x variants?
>>>
>>> Yes, the usb2phy is always available as an extcon unless you make a
>>> device that doesn't have usb2 capability.
>>> In that case you'd have to override the device anyways.
>>> If we want to turn on default role otg here, we'd need this defined
>>> here as well or things break.
>>
>> OK, so it seems to me that the extcon could or should enter the
>> rk356x.dtsi (and can be removed from the rk3566.dtsi and the
>> rk3568-evb1-v10.dts in this series). Is that correct?
> 
> Apologies it seems I just missed this.
> Yes, this could get moved to the base dtsi.
> I'd prefer to do it as part of the next series supporting otg, as I've
> only been doing OTG development on the rk3566 and would prefer it be
> fully tested.

Thanks for the clarification, that'll be fine for me.

Best regards,
Michael

> However if Johan prefers I can send another revision accomplishing this now.
> 
>>
>> Best regards,
>> Michael
>>
>>> [...]