[PATCH v2 3/3] arm64: dts: rockchip: px30: use rk gpio naming convention into reset-gpios

[Tommaso Merciai]

Use rk gpio naming convention into reset-gpios of ov5695 camera

Signed-off-by: Tommaso Merciai <tommaso.merciai at amarulasolutions.com>
Tested-by: Tommaso Merciai <tommaso.merciai at amarulasolutions.com>
---
 arch/arm64/boot/dts/rockchip/px30-evb.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/px30-evb.dts b/arch/arm64/boot/dts/rockchip/px30-evb.dts
index aee7fecdfc15..bc59a5588ea7 100644
--- a/arch/arm64/boot/dts/rockchip/px30-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/px30-evb.dts
@@ -449,8 +449,8 @@ ov5695: ov5695 at 36 {
 		dvdd-supply = <&vcc1v5_dvp>;
 		dovdd-supply = <&vcc1v8_dvp>;
 		pinctrl-names = "default";
-		reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
 		pinctrl-0 = <&cif_clkout_m0 &mipi_pdn>;
+		reset-gpios = <&gpio2 RK_PB6 GPIO_ACTIVE_LOW>;
 
 		port {
 			ucam_out: endpoint {
-- 
2.25.1