[BUG] rockpro64 board hangs in console_init() after commit 10e14073107d
Alexandru Elisei
alexandru.elisei at arm.com
Wed Jun 15 05:50:24 PDT 2022
Hi Petr,
On Tue, Jun 14, 2022 at 05:00:04PM +0200, Petr Mladek wrote:
> On Tue 2022-06-14 14:23:42, Alexandru Elisei wrote:
> > With this change:
> >
> > diff --git a/init/main.c b/init/main.c
> > index 0ee39cdcfcac..a245982eb8a2 100644
> > --- a/init/main.c
> > +++ b/init/main.c
> > @@ -1057,6 +1057,8 @@ asmlinkage __visible void __init __no_sanitize_address start_kernel(void)
> >
> > kmem_cache_init_late();
> >
> > + lockdep_init();
> > +
> > /*
> > * HACK ALERT! This is early. We're enabling the console before
> > * we've done PCI setups etc, and console_init() must be aware of
> > @@ -1067,8 +1069,6 @@ asmlinkage __visible void __init __no_sanitize_address start_kernel(void)
> > panic("Too many boot %s vars at `%s'", panic_later,
> > panic_param);
> >
> > - lockdep_init();
> > -
> > /*
> > * Need to run this when irqs are enabled, because it wants
> > * to self-test [hard/soft]-irqs on/off lock inversion bugs
> > diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c
> > index ea3dd55709e7..aa7684c6745d 100644
> > --- a/kernel/printk/printk.c
> > +++ b/kernel/printk/printk.c
> > @@ -2705,7 +2705,10 @@ static int console_cpu_notify(unsigned int cpu)
> > */
> > void console_lock(void)
> > {
> > + pr_info("before might_sleep()");
> > might_sleep();
> > + pr_info("before down_console_sem()");
> > + pr_info("before down_console_sem()");
> >
> > down_console_sem();
> > if (console_suspended)
> > @@ -3508,12 +3511,18 @@ int unregister_console(struct console *console)
> > if (console->exit)
> > res = console->exit(console);
> >
> > + pr_info("Exiting from unregister_console(), res = %d", res);
> > + pr_info("Exiting from unregister_console(), res = %d", res);
> > +
> > return res;
> >
> > out_disable_unlock:
> > console->flags &= ~CON_ENABLED;
> > console_unlock();
> >
> > + pr_info("Exiting from unregister_console(), res = %d", res);
> > + pr_info("Exiting from unregister_console(), res = %d", res);
> > +
> > return res;
> > }
> > EXPORT_SYMBOL(unregister_console);
> >
> > Some of the pr_info statements are duplicated to see the output just before
> > the console hangs (I assume they're needed to force a buffer flush).
> >
> > This is what I got:
> >
> > [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
> > [ 0.000000] Linux version 5.19.0-rc2-dirty (alex at monolith) (aarch64-linux-gnu-gcc (GCC) 12.1.0, GNU ld (GNU Binutils) 2.38) #106 SMP PREEMPT Tue Jun 14 14:03:30 BST 2022
> > [ 0.000000] Machine model: Pine64 RockPro64 v2.0
> > [ 0.000000] efi: UEFI not found.
> > [ 0.000000] earlycon: uart0 at MMIO32 0x00000000ff1a0000 (options '1500000n8')
> > [ 0.000000] printk: before might_sleep()
> > [ 0.000000] printk: before down_console_sem()
> > [ 0.000000] printk: before down_console_sem()
> > [ 0.000000] printk: bootconsole [uart0] enabled
> > [ 0.000000] NUMA: No NUMA configuration found
> > [ 0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x00000000f7ffffff]
> > [ 0.000000] NUMA: NODE_DATA [mem 0xf77cef40-0xf77d0fff]
> [...]
> > [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
> > [ 0.005602] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
> > [ 0.006373] ... MAX_LOCKDEP_SUBCLASSES: 8
> > [ 0.006789] ... MAX_LOCK_DEPTH: 48
> > [ 0.007212] ... MAX_LOCKDEP_KEYS: 8192
> > [ 0.007651] ... CLASSHASH_SIZE: 4096
> > [ 0.008088] ... MAX_LOCKDEP_ENTRIES: 32768
> > [ 0.008535] ... MAX_LOCKDEP_CHAINS: 65536
> > [ 0.008981] ... CHAINHASH_SIZE: 32768
> > [ 0.009428] memory used by lock dependency info: 6365 kB
> > [ 0.010018] memory used for stack traces: 4224 kB
> > [ 0.010500] per task-struct memory footprint: 1920 bytes
> > [ 0.011059] printk: before might_sleep()
> > [ 0.011079] printk: before down_console_sem()
> > [ 0.011477] printk: before down_console_sem()
> > [ 0.012112] Console: colour dummy device 80x25
> > [ 0.012984] printk: before might_sleep()
> > [ 0.013003] printk: before down_console_sem()
> > [ 0.013399] printk: before down_console_sem()
> > [ 0.013860] printk: console [tty0] enabled
> > [ 0.014986] printk: bootconsole [uart0] disabled
> > [ 0.015564] printk: before might_sleep()
> > [ 0.015582] printk: before down_console_sem()
>
> I think that it did not print the 2nd "printk: before
> down_console_sem()" because there was missing newline "\n".
You're right, tried it with appending the newline character and it worked.
>
> printk() keeps such a line open because pr_cont() might append
> to it. The message will get printed to the console only when
> pr_cont("bla bla \n") is called or when another non-continuous
> printk() is called.
Thank you for the explanation!
>
> > > Does the system boot when you avoid "earlycon" parameter?
> >
> > It doesn't boot, it hangs and I don't get any output.
>
> The difference might be that earlycon uses the serial port.
> While the normal console is terminal "tty0".
>
> Does it help to configure also the normal serial console.
> I mean booting with something like:
>
> earlycon console=uart,mmio32,0x00000000ff1a0000,1500000n8 console=tty0
>
> I am not completely sure about the console=uart parameter. It is a
> shame but I have never used it. I took the format from
> Documentation/admin-guide/kernel-parameters.txt and the values
> from your boot log:
>
> [ 0.000000] earlycon: uart0 at MMIO32 0x00000000ff1a0000 (options '1500000n8')
According to the devicetree, earlycon should be serial2:1500000n8 (the
"stdout-path" property of the "chosen" node), which is an alias for the
node /serial at ff1a0000. That serial console has the compatible property
"rockchip,rk3399-uart", "snps,dw-apb-uart". The uart8250 early console
driver binds to that device.
Putting the kernel output and the information from the devicetree together,
the earlycon parameter should be:
earlycon=uart8250,mmio32,0xff1a0000,1500000n8
But when I use that, I don't get any output and the kernel hangs on v5.18
and v5.17 too.
It turns out that leaving the baudrate out of the earlycon parameter:
earlycon=uart8250,mmio32,0xff1a0000
or specifying a baudrate of 115200:
earlycon=uart8250,mmio32,0xff1a0000,115200n8
makes it work again, and the board can boot. I assume that because a bogus
baud rate makes earlycon work, there is something off with how the 8250
earlycon driver gets the UART clock frequency (credits to Andre Przywara
for helping me with the UART debugging and discovering this).
>
> > > > I've booted a kernel compiled with CONFIG_PROVE_LOCKING=y, as the offending
> > > > commit fiddles with locks, but no splat was produced that would explain the
> > > > hang. I've also tried to boot a v5,19-rc2 kernel on my odroid-c4, the board
> > > > is booting just fine, so I'm guessing it only affects of subset of arm64
> > > > boards.
> > >
> > > You might try to switch the order of console_init() and lockdep_init()
> > > in start_kernel() in init/main.c
> >
> > Did so above.
>
> Unfortunately, it did not print anything :-(
With this patch [1] I was able to succefully boot the board. So I guess
problem should be fixed.
[1] https://lore.kernel.org/all/20220614124618.2830569-1-suzuki.poulose@arm.com/
Thanks,
Alex
More information about the Linux-rockchip
mailing list