[PATCH 2/2] media: rkisp1: Add UYVY as an output format

[Laurent Pinchart]

Hi Paul,

Thank you for the patch.

On Thu, Jul 14, 2022 at 08:26:03PM +0900, Paul Elder wrote:
> Add support for UYVY as an output format. The uv_swap bit in the
> MI_XTD_FORMAT_CTRL register that is used for the NV formats does not
> work for packed YUV formats. Thus, UYVY support is implemented via
> byte-swapping. This method clearly does not work for implementing
> support for YVYU and VYUY.
> 
> Signed-off-by: Paul Elder <paul.elder at ideasonboard.com>
> 
> ---
> UYVY for the self path has not been tested because no device supports
> it. The rk3399 has a self path, but does not have the
> MI_OUTPUT_ALIGN_FORMAT register and thus does not support UYVY. The
> i.MX8MP does support UYVY, but does not have a self path.

I'm tempted to drop it then, as the code below isn't correct given that
you use the same register for both MP and SP. Let's address MP only for
now.

> ---
>  .../platform/rockchip/rkisp1/rkisp1-capture.c | 40 +++++++++++++++++++
>  1 file changed, 40 insertions(+)
> 
> diff --git a/drivers/media/platform/rockchip/rkisp1/rkisp1-capture.c b/drivers/media/platform/rockchip/rkisp1/rkisp1-capture.c
> index 85fd85fe208c..77496ccef7ec 100644
> --- a/drivers/media/platform/rockchip/rkisp1/rkisp1-capture.c
> +++ b/drivers/media/platform/rockchip/rkisp1/rkisp1-capture.c
> @@ -97,6 +97,12 @@ static const struct rkisp1_capture_fmt_cfg rkisp1_mp_fmts[] = {
>  		.uv_swap = 0,
>  		.write_format = RKISP1_MI_CTRL_MP_WRITE_YUVINT,
>  		.mbus = MEDIA_BUS_FMT_YUYV8_2X8,
> +	}, {
> +		.fourcc = V4L2_PIX_FMT_UYVY,
> +		.uv_swap = 0,
> +		.yc_swap = 1,
> +		.write_format = RKISP1_MI_CTRL_MP_WRITE_YUVINT,
> +		.mbus = MEDIA_BUS_FMT_YUYV8_2X8,
>  	}, {
>  		.fourcc = V4L2_PIX_FMT_YUV422P,
>  		.uv_swap = 0,
> @@ -231,6 +237,13 @@ static const struct rkisp1_capture_fmt_cfg rkisp1_sp_fmts[] = {
>  		.write_format = RKISP1_MI_CTRL_SP_WRITE_INT,
>  		.output_format = RKISP1_MI_CTRL_SP_OUTPUT_YUV422,
>  		.mbus = MEDIA_BUS_FMT_YUYV8_2X8,
> +	}, {
> +		.fourcc = V4L2_PIX_FMT_UYVY,
> +		.uv_swap = 0,
> +		.yc_swap = 1,
> +		.write_format = RKISP1_MI_CTRL_SP_WRITE_INT,
> +		.output_format = RKISP1_MI_CTRL_SP_OUTPUT_YUV422,
> +		.mbus = MEDIA_BUS_FMT_YUYV8_2X8,
>  	}, {
>  		.fourcc = V4L2_PIX_FMT_YUV422P,
>  		.uv_swap = 0,
> @@ -464,6 +477,20 @@ static void rkisp1_mp_config(struct rkisp1_capture *cap)
>  		rkisp1_write(rkisp1, RKISP1_CIF_MI_XTD_FORMAT_CTRL, reg);
>  	}
>  
> +	/*
> +	 * uv swapping with the MI_XTD_FORMAT_CTRL register only works for

s at uv@U/V@

> +	 * NV12/NV21 and NV16/NV61, so instead use byte swap to support UYVY.
> +	 * YVYU and VYUY cannot be supported with this method.
> +	 */
> +	if (rkisp1->info->features & RKISP1_FEATURE_MI_OUTPUT_ALIGN) {
> +		reg = rkisp1_read(rkisp1, RKISP1_CIF_MI_OUTPUT_ALIGN_FORMAT);
> +		if (cap->pix.cfg->yc_swap)
> +			reg |= RKISP1_CIF_OUTPUT_ALIGN_FORMAT_MP_BYTE_SWAP_BYTES;
> +		else
> +			reg &= ~RKISP1_CIF_OUTPUT_ALIGN_FORMAT_MP_BYTE_SWAP_BYTES;
> +		rkisp1_write(rkisp1, RKISP1_CIF_MI_OUTPUT_ALIGN_FORMAT, reg);

As the register is not initialized anywhere, it would be better to write
it fully here instead of a read-modify-write cycle. Same comments below.

> +	}
> +
>  	rkisp1_mi_config_ctrl(cap);
>  
>  	reg = rkisp1_read(rkisp1, RKISP1_CIF_MI_CTRL);
> @@ -505,6 +532,19 @@ static void rkisp1_sp_config(struct rkisp1_capture *cap)
>  		rkisp1_write(rkisp1, RKISP1_CIF_MI_XTD_FORMAT_CTRL, reg);
>  	}
>  
> +	/*
> +	 * uv swapping with the MI_XTD_FORMAT_CTRL register only works for
> +	 * NV12/NV21 and NV16/NV61, so instead use byte swap to support UYVY.
> +	 * YVYU and VYUY cannot be supported with this method.
> +	 */
> +	if (rkisp1->info->features & RKISP1_FEATURE_MI_OUTPUT_ALIGN) {
> +		reg = rkisp1_read(rkisp1, RKISP1_CIF_MI_OUTPUT_ALIGN_FORMAT);
> +		if (cap->pix.cfg->yc_swap)
> +			reg |= RKISP1_CIF_OUTPUT_ALIGN_FORMAT_SP_BYTE_SWAP_BYTES;
> +		else
> +			reg &= ~RKISP1_CIF_OUTPUT_ALIGN_FORMAT_SP_BYTE_SWAP_BYTES;
> +		rkisp1_write(rkisp1, RKISP1_CIF_MI_OUTPUT_ALIGN_FORMAT, reg);
> +	}

Missing blank line.

Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>

>  	rkisp1_mi_config_ctrl(cap);
>  
>  	mi_ctrl = rkisp1_read(rkisp1, RKISP1_CIF_MI_CTRL);

-- 
Regards,

Laurent Pinchart