[PATCH v2 09/11] arm: dts: rockchip: sync rk3066/rk3188 DT files from Linux
Johan Jonker
jbx6244 at gmail.com
Sat Jul 9 11:50:39 PDT 2022
Sync rk3066/rk3188 DT files from Linux.
This is the state as of v5.18 in Linux +
nfc node for MK808 rk3066a.
CRU nodes now have a clock property.
To prefend dtoc errors a fixed clock must also be
included for tpl/spl in the rk3xxx-u-boot.dtsi file.
Signed-off-by: Johan Jonker <jbx6244 at gmail.com>
---
arch/arm/dts/rk3066a-mk808.dts | 18 ++++++++++++++++++
arch/arm/dts/rk3066a.dtsi | 3 ++-
arch/arm/dts/rk3188-radxarock.dts | 3 +--
arch/arm/dts/rk3188.dtsi | 24 +++++++++++++++---------
arch/arm/dts/rk3xxx-u-boot.dtsi | 4 ++++
5 files changed, 40 insertions(+), 12 deletions(-)
diff --git a/arch/arm/dts/rk3066a-mk808.dts b/arch/arm/dts/rk3066a-mk808.dts
index 667d57a4..cfa318a5 100644
--- a/arch/arm/dts/rk3066a-mk808.dts
+++ b/arch/arm/dts/rk3066a-mk808.dts
@@ -160,6 +160,24 @@
status = "okay";
};
+&nfc {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ nand at 0 {
+ reg = <0>;
+ label = "rk-nand";
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ nand-ecc-step-size = <1024>;
+ nand-ecc-strength = <40>;
+ nand-is-boot-medium;
+ rockchip,boot-blks = <8>;
+ rockchip,boot-ecc-strength = <24>;
+ };
+};
+
&pinctrl {
usb-host {
host_drv: host-drv {
diff --git a/arch/arm/dts/rk3066a.dtsi b/arch/arm/dts/rk3066a.dtsi
index c25b9695..de9915d9 100644
--- a/arch/arm/dts/rk3066a.dtsi
+++ b/arch/arm/dts/rk3066a.dtsi
@@ -202,8 +202,9 @@
cru: clock-controller at 20000000 {
compatible = "rockchip,rk3066a-cru";
reg = <0x20000000 0x1000>;
+ clocks = <&xin24m>;
+ clock-names = "xin24m";
rockchip,grf = <&grf>;
-
#clock-cells = <1>;
#reset-cells = <1>;
assigned-clocks = <&cru PLL_CPLL>, <&cru PLL_GPLL>,
diff --git a/arch/arm/dts/rk3188-radxarock.dts b/arch/arm/dts/rk3188-radxarock.dts
index e7138a4a..a9ed3cd2 100644
--- a/arch/arm/dts/rk3188-radxarock.dts
+++ b/arch/arm/dts/rk3188-radxarock.dts
@@ -6,7 +6,6 @@
/dts-v1/;
#include <dt-bindings/input/input.h>
#include "rk3188.dtsi"
-#include "rk3188-radxarock-u-boot.dtsi"
/ {
model = "Radxa Rock";
@@ -25,7 +24,7 @@
compatible = "gpio-keys";
autorepeat;
- power {
+ key-power {
gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
diff --git a/arch/arm/dts/rk3188.dtsi b/arch/arm/dts/rk3188.dtsi
index 9a80f83a..cdd4a0bd 100644
--- a/arch/arm/dts/rk3188.dtsi
+++ b/arch/arm/dts/rk3188.dtsi
@@ -54,7 +54,7 @@
};
};
- cpu0_opp_table: opp_table0 {
+ cpu0_opp_table: opp-table-0 {
compatible = "operating-points-v2";
opp-shared;
@@ -195,8 +195,9 @@
cru: clock-controller at 20000000 {
compatible = "rockchip,rk3188-cru";
reg = <0x20000000 0x1000>;
+ clocks = <&xin24m>;
+ clock-names = "xin24m";
rockchip,grf = <&grf>;
-
#clock-cells = <1>;
#reset-cells = <1>;
};
@@ -223,7 +224,7 @@
#size-cells = <1>;
ranges;
- gpio0: gpio0 at 2000a000 {
+ gpio0: gpio at 2000a000 {
compatible = "rockchip,rk3188-gpio-bank0";
reg = <0x2000a000 0x100>;
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
@@ -236,7 +237,7 @@
#interrupt-cells = <2>;
};
- gpio1: gpio1 at 2003c000 {
+ gpio1: gpio at 2003c000 {
compatible = "rockchip,gpio-bank";
reg = <0x2003c000 0x100>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
@@ -249,7 +250,7 @@
#interrupt-cells = <2>;
};
- gpio2: gpio2 at 2003e000 {
+ gpio2: gpio at 2003e000 {
compatible = "rockchip,gpio-bank";
reg = <0x2003e000 0x100>;
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
@@ -262,7 +263,7 @@
#interrupt-cells = <2>;
};
- gpio3: gpio3 at 20080000 {
+ gpio3: gpio at 20080000 {
compatible = "rockchip,gpio-bank";
reg = <0x20080000 0x100>;
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
@@ -275,15 +276,15 @@
#interrupt-cells = <2>;
};
- pcfg_pull_up: pcfg_pull_up {
+ pcfg_pull_up: pcfg-pull-up {
bias-pull-up;
};
- pcfg_pull_down: pcfg_pull_down {
+ pcfg_pull_down: pcfg-pull-down {
bias-pull-down;
};
- pcfg_pull_none: pcfg_pull_none {
+ pcfg_pull_none: pcfg-pull-none {
bias-disable;
};
@@ -641,6 +642,11 @@
&grf {
compatible = "rockchip,rk3188-grf", "syscon", "simple-mfd";
+ io_domains: io-domains {
+ compatible = "rockchip,rk3188-io-voltage-domain";
+ status = "disabled";
+ };
+
usbphy: usbphy {
compatible = "rockchip,rk3188-usb-phy";
#address-cells = <1>;
diff --git a/arch/arm/dts/rk3xxx-u-boot.dtsi b/arch/arm/dts/rk3xxx-u-boot.dtsi
index e67432fb..c77d1fae 100644
--- a/arch/arm/dts/rk3xxx-u-boot.dtsi
+++ b/arch/arm/dts/rk3xxx-u-boot.dtsi
@@ -33,3 +33,7 @@
&uart2 {
clock-frequency = <24000000>;
};
+
+&xin24m {
+ u-boot,dm-pre-reloc;
+};
--
2.20.1
More information about the Linux-rockchip
mailing list