[PATCH v1 4/6] arm: dts: rockchip: sync rk3066/rk3188 DT files from Linux

Johan Jonker jbx6244 at gmail.com
Tue Jul 5 06:04:52 PDT 2022


From: Johan Jonker <jbx6244 at gmail.com>

Sync rk3066/rk3188 DT files from Linux.
This is the state as of v5.18 in Linux +
nfc node for MK808 rk3066a.
CRU nodes now have a clock property.
To prefend dtoc errors a fixed clock must also be
included for tpl/spl in the rk3xxx-u-boot.dtsi file.

Signed-off-by: Johan Jonker <jbx6244 at gmail.com>
---
 arch/arm/dts/rk3066a-mk808.dts    | 18 ++++++++++++++++++
 arch/arm/dts/rk3066a.dtsi         |  3 ++-
 arch/arm/dts/rk3188-radxarock.dts |  3 +--
 arch/arm/dts/rk3188.dtsi          | 24 +++++++++++++++---------
 arch/arm/dts/rk3xxx-u-boot.dtsi   |  4 ++++
 5 files changed, 40 insertions(+), 12 deletions(-)

diff --git a/arch/arm/dts/rk3066a-mk808.dts b/arch/arm/dts/rk3066a-mk808.dts
index 667d57a4..cfa318a5 100644
--- a/arch/arm/dts/rk3066a-mk808.dts
+++ b/arch/arm/dts/rk3066a-mk808.dts
@@ -160,6 +160,24 @@
 	status = "okay";
 };
 
+&nfc {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	nand at 0 {
+		reg = <0>;
+		label = "rk-nand";
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-step-size = <1024>;
+		nand-ecc-strength = <40>;
+		nand-is-boot-medium;
+		rockchip,boot-blks = <8>;
+		rockchip,boot-ecc-strength = <24>;
+	};
+};
+
 &pinctrl {
 	usb-host {
 		host_drv: host-drv {
diff --git a/arch/arm/dts/rk3066a.dtsi b/arch/arm/dts/rk3066a.dtsi
index c25b9695..de9915d9 100644
--- a/arch/arm/dts/rk3066a.dtsi
+++ b/arch/arm/dts/rk3066a.dtsi
@@ -202,8 +202,9 @@
 	cru: clock-controller at 20000000 {
 		compatible = "rockchip,rk3066a-cru";
 		reg = <0x20000000 0x1000>;
+		clocks = <&xin24m>;
+		clock-names = "xin24m";
 		rockchip,grf = <&grf>;
-
 		#clock-cells = <1>;
 		#reset-cells = <1>;
 		assigned-clocks = <&cru PLL_CPLL>, <&cru PLL_GPLL>,
diff --git a/arch/arm/dts/rk3188-radxarock.dts b/arch/arm/dts/rk3188-radxarock.dts
index e7138a4a..a9ed3cd2 100644
--- a/arch/arm/dts/rk3188-radxarock.dts
+++ b/arch/arm/dts/rk3188-radxarock.dts
@@ -6,7 +6,6 @@
 /dts-v1/;
 #include <dt-bindings/input/input.h>
 #include "rk3188.dtsi"
-#include "rk3188-radxarock-u-boot.dtsi"
 
 / {
 	model = "Radxa Rock";
@@ -25,7 +24,7 @@
 		compatible = "gpio-keys";
 		autorepeat;
 
-		power {
+		key-power {
 			gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			label = "GPIO Key Power";
diff --git a/arch/arm/dts/rk3188.dtsi b/arch/arm/dts/rk3188.dtsi
index 9a80f83a..cdd4a0bd 100644
--- a/arch/arm/dts/rk3188.dtsi
+++ b/arch/arm/dts/rk3188.dtsi
@@ -54,7 +54,7 @@
 		};
 	};
 
-	cpu0_opp_table: opp_table0 {
+	cpu0_opp_table: opp-table-0 {
 		compatible = "operating-points-v2";
 		opp-shared;
 
@@ -195,8 +195,9 @@
 	cru: clock-controller at 20000000 {
 		compatible = "rockchip,rk3188-cru";
 		reg = <0x20000000 0x1000>;
+		clocks = <&xin24m>;
+		clock-names = "xin24m";
 		rockchip,grf = <&grf>;
-
 		#clock-cells = <1>;
 		#reset-cells = <1>;
 	};
@@ -223,7 +224,7 @@
 		#size-cells = <1>;
 		ranges;
 
-		gpio0: gpio0 at 2000a000 {
+		gpio0: gpio at 2000a000 {
 			compatible = "rockchip,rk3188-gpio-bank0";
 			reg = <0x2000a000 0x100>;
 			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
@@ -236,7 +237,7 @@
 			#interrupt-cells = <2>;
 		};
 
-		gpio1: gpio1 at 2003c000 {
+		gpio1: gpio at 2003c000 {
 			compatible = "rockchip,gpio-bank";
 			reg = <0x2003c000 0x100>;
 			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
@@ -249,7 +250,7 @@
 			#interrupt-cells = <2>;
 		};
 
-		gpio2: gpio2 at 2003e000 {
+		gpio2: gpio at 2003e000 {
 			compatible = "rockchip,gpio-bank";
 			reg = <0x2003e000 0x100>;
 			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
@@ -262,7 +263,7 @@
 			#interrupt-cells = <2>;
 		};
 
-		gpio3: gpio3 at 20080000 {
+		gpio3: gpio at 20080000 {
 			compatible = "rockchip,gpio-bank";
 			reg = <0x20080000 0x100>;
 			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
@@ -275,15 +276,15 @@
 			#interrupt-cells = <2>;
 		};
 
-		pcfg_pull_up: pcfg_pull_up {
+		pcfg_pull_up: pcfg-pull-up {
 			bias-pull-up;
 		};
 
-		pcfg_pull_down: pcfg_pull_down {
+		pcfg_pull_down: pcfg-pull-down {
 			bias-pull-down;
 		};
 
-		pcfg_pull_none: pcfg_pull_none {
+		pcfg_pull_none: pcfg-pull-none {
 			bias-disable;
 		};
 
@@ -641,6 +642,11 @@
 &grf {
 	compatible = "rockchip,rk3188-grf", "syscon", "simple-mfd";
 
+	io_domains: io-domains {
+		compatible = "rockchip,rk3188-io-voltage-domain";
+		status = "disabled";
+	};
+
 	usbphy: usbphy {
 		compatible = "rockchip,rk3188-usb-phy";
 		#address-cells = <1>;
diff --git a/arch/arm/dts/rk3xxx-u-boot.dtsi b/arch/arm/dts/rk3xxx-u-boot.dtsi
index e67432fb..c77d1fae 100644
--- a/arch/arm/dts/rk3xxx-u-boot.dtsi
+++ b/arch/arm/dts/rk3xxx-u-boot.dtsi
@@ -33,3 +33,7 @@
 &uart2 {
 	clock-frequency = <24000000>;
 };
+
+&xin24m {
+	u-boot,dm-pre-reloc;
+};
-- 
2.20.1




More information about the Linux-rockchip mailing list