[PATCH 21/27] arm64: dts: rockchip: rk356x: Add HDMI nodes

[Peter Geis]

On Wed, Jan 26, 2022 at 2:25 PM Robin Murphy <robin.murphy at arm.com> wrote:
>
> On 2022-01-26 18:44, Peter Geis wrote:
> > On Wed, Jan 26, 2022 at 12:56 PM Robin Murphy <robin.murphy at arm.com> wrote:
> >>
> >> On 2022-01-26 16:04, Peter Geis wrote:
> >>> On Wed, Jan 26, 2022 at 9:58 AM Sascha Hauer <s.hauer at pengutronix.de> wrote:
> >>>>
> >>>> Add support for the HDMI port found on RK3568.
> >>>>
> >>>> Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
> >>>> ---
> >>>>    arch/arm64/boot/dts/rockchip/rk356x.dtsi | 37 +++++++++++++++++++++++-
> >>>>    1 file changed, 36 insertions(+), 1 deletion(-)
> >>>>
> >>>> diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> >>>> index 4008bd666d01..e38fb223e9b8 100644
> >>>> --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> >>>> +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> >>>> @@ -10,7 +10,6 @@
> >>>>    #include <dt-bindings/pinctrl/rockchip.h>
> >>>>    #include <dt-bindings/power/rk3568-power.h>
> >>>>    #include <dt-bindings/soc/rockchip,boot-mode.h>
> >>>> -#include <dt-bindings/soc/rockchip,vop2.h>
> >>>>    #include <dt-bindings/thermal/thermal.h>
> >>>>
> >>>>    / {
> >>>> @@ -502,6 +501,42 @@ vop_mmu: iommu at fe043e00 {
> >>>>                   status = "disabled";
> >>>>           };
> >>>>
> >>>> +       hdmi: hdmi at fe0a0000 {
> >>>> +               compatible = "rockchip,rk3568-dw-hdmi";
> >>>> +               reg = <0x0 0xfe0a0000 0x0 0x20000>;
> >>>> +               interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
> >>>> +               clocks = <&cru PCLK_HDMI_HOST>,
> >>>> +                        <&cru CLK_HDMI_SFR>,
> >>>> +                        <&cru CLK_HDMI_CEC>,
> >>>> +                        <&pmucru CLK_HDMI_REF>,
> >>>> +                        <&cru HCLK_VOP>;
> >>>> +               clock-names = "iahb", "isfr", "cec", "ref", "hclk";
> >>>> +               pinctrl-names = "default";
> >>>> +               pinctrl-0 = <&hdmitx_scl &hdmitx_sda &hdmitxm0_cec>;
> >>>
> >>> I looked into CEC support here, and it seems that it does work with one change.
> >>> Please add the two following lines to your patch:
> >>> assigned-clocks = <&cru CLK_HDMI_CEC>;
> >>> assigned-clock-rates = <32768>;
> >>>
> >>> The issue is the clk_rtc32k_frac clock that feeds clk_rtc_32k which
> >>> feeds clk_hdmi_cec is 24mhz at boot, which is too high for CEC to
> >>> function.
> >>
> >> Wouldn't it make far more sense to just stick a suitable clk_set_rate()
> >> call in the driver? AFAICS it's already explicitly aware of the CEC clock.
> >
> > This is handled purely in the
> > drivers/gpu/drm/bridge/synopsys/dw-hdmi.c driver, so I'm hesitant to
> > touch it there as it would affect all users, not just Rockchip.
>
> I'd have a strong hunch that it's a standard thing for the DesignWare IP
> and not affected by platform integration. I don't have the magical
> Synopsys databook, but between the trusty old i.MX6 manual and most of
> the other in-tree DTs getting their dw-hdmi "cec" clock from
> suspiciously-obviously-named sources, I'd be somewhat surprised if it
> was ever anything other than 32KHz.

My main concern was similar to the other HDMI clock issues, mainly
setting the clock can propagate up and affect other users of the
upstream clock.
I'll spin up a quick patch for this method.

Thanks,
Peter

>
> Robin.
>
> > Could someone familiar with the dw-hdmi IP weigh in on the minimum and
> > maximum clock rate the CEC block can handle?
> >
> >>
> >> Robin.
> >>
> >>>> +               power-domains = <&power RK3568_PD_VO>;
> >>>> +               reg-io-width = <4>;
> >>>> +               rockchip,grf = <&grf>;
> >>>> +               #sound-dai-cells = <0>;
> >>>> +               status = "disabled";
> >>>> +
> >>>> +               ports {
> >>>> +                       #address-cells = <1>;
> >>>> +                       #size-cells = <0>;
> >>>> +
> >>>> +                       hdmi_in: port at 0 {
> >>>> +                               reg = <0>;
> >>>> +                               #address-cells = <1>;
> >>>> +                               #size-cells = <0>;
> >>>> +                       };
> >>>> +
> >>>> +                       hdmi_out: port at 1 {
> >>>> +                               reg = <1>;
> >>>> +                               #address-cells = <1>;
> >>>> +                               #size-cells = <0>;
> >>>> +                       };
> >>>> +               };
> >>>> +       };
> >>>> +
> >>>>           qos_gpu: qos at fe128000 {
> >>>>                   compatible = "rockchip,rk3568-qos", "syscon";
> >>>>                   reg = <0x0 0xfe128000 0x0 0x20>;
> >>>> --
> >>>> 2.30.2
> >>>>
> >>>
> >>> _______________________________________________
> >>> Linux-rockchip mailing list
> >>> Linux-rockchip at lists.infradead.org
> >>> http://lists.infradead.org/mailman/listinfo/linux-rockchip