[PATCH 11/27] clk: rockchip: rk3568: Add more PLL rates

[Sascha Hauer]

This adds a few more PLL settings needed for some standard resolutions:

297MHz    3840x2160-30.00
241.5MHz  2560x1440-59.95
135MHz    1280x1024-75.02
119MHz    1680x1050-59.88
108MHz    1280x1024-60.02
 78.75MHz 1024x768-75.03

Changes since v3:
- new patch

Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
 drivers/clk/rockchip/clk-rk3568.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/clk/rockchip/clk-rk3568.c b/drivers/clk/rockchip/clk-rk3568.c
index 69a9e8069a48..9d889fc46811 100644
--- a/drivers/clk/rockchip/clk-rk3568.c
+++ b/drivers/clk/rockchip/clk-rk3568.c
@@ -71,11 +71,17 @@ static struct rockchip_pll_rate_table rk3568_pll_rates[] = {
 	RK3036_PLL_RATE(500000000, 1, 125, 6, 1, 1, 0),
 	RK3036_PLL_RATE(408000000, 1, 68, 2, 2, 1, 0),
 	RK3036_PLL_RATE(312000000, 1, 78, 6, 1, 1, 0),
+	RK3036_PLL_RATE(297000000, 2, 99, 4, 1, 1, 0),
+	RK3036_PLL_RATE(241500000, 2, 161, 4, 2, 1, 0),
 	RK3036_PLL_RATE(216000000, 1, 72, 4, 2, 1, 0),
 	RK3036_PLL_RATE(200000000, 1, 100, 3, 4, 1, 0),
 	RK3036_PLL_RATE(148500000, 1, 99, 4, 4, 1, 0),
+	RK3036_PLL_RATE(135000000, 2, 45, 4, 1, 1, 0),
+	RK3036_PLL_RATE(119000000, 3, 119, 4, 2, 1, 0),
+	RK3036_PLL_RATE(108000000, 2, 45, 5, 1, 1, 0),
 	RK3036_PLL_RATE(100000000, 1, 150, 6, 6, 1, 0),
 	RK3036_PLL_RATE(96000000, 1, 96, 6, 4, 1, 0),
+	RK3036_PLL_RATE(78750000, 1, 96, 6, 4, 1, 0),
 	RK3036_PLL_RATE(74250000, 2, 99, 4, 4, 1, 0),
 	{ /* sentinel */ },
 };
-- 
2.30.2