[PATCH V4 11/11] arm64: dts: imx8mm: Enable Hantro G1 and G2 video decoders

[Lucas Stach]

Am Dienstag, dem 25.01.2022 um 11:11 -0600 schrieb Adam Ford:
> There are two decoders on the i.MX8M Mini controlled by the
> vpu-blk-ctrl.  The G1 supports H264 and VP8 while the
> G2 support HEVC and VP9.
> 
> Signed-off-by: Adam Ford <aford173 at gmail.com>
> Reviewed-by: Ezequiel Garcia <ezequiel at vanguardiasur.com.ar>

Reviewed-by: Lucas Stach <l.stach at pengutronix.de>

> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> index 0c7a72c51a31..98aec4421713 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> @@ -1272,6 +1272,22 @@ gpu_2d: gpu at 38008000 {
>  			power-domains = <&pgc_gpu>;
>  		};
>  
> +		vpu_g1: video-codec at 38300000 {
> +			compatible = "nxp,imx8mm-vpu-g1";
> +			reg = <0x38300000 0x10000>;
> +			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&clk IMX8MM_CLK_VPU_G1_ROOT>;
> +			power-domains = <&vpu_blk_ctrl IMX8MM_VPUBLK_PD_G1>;
> +		};
> +
> +		vpu_g2: video-codec at 38310000 {
> +			compatible = "nxp,imx8mq-vpu-g2";
> +			reg = <0x38310000 0x10000>;
> +			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&clk IMX8MM_CLK_VPU_G2_ROOT>;
> +			power-domains = <&vpu_blk_ctrl IMX8MM_VPUBLK_PD_G2>;
> +		};
> +
>  		vpu_blk_ctrl: blk-ctrl at 38330000 {
>  			compatible = "fsl,imx8mm-vpu-blk-ctrl", "syscon";
>  			reg = <0x38330000 0x100>;
> @@ -1282,6 +1298,12 @@ vpu_blk_ctrl: blk-ctrl at 38330000 {
>  				 <&clk IMX8MM_CLK_VPU_G2_ROOT>,
>  				 <&clk IMX8MM_CLK_VPU_H1_ROOT>;
>  			clock-names = "g1", "g2", "h1";
> +			assigned-clocks = <&clk IMX8MM_CLK_VPU_G1>,
> +					  <&clk IMX8MM_CLK_VPU_G2>;
> +			assigned-clock-parents = <&clk IMX8MM_VPU_PLL_OUT>,
> +						 <&clk IMX8MM_VPU_PLL_OUT>;
> +			assigned-clock-rates = <600000000>,
> +					       <600000000>;
>  			#power-domain-cells = <1>;
>  		};
>