Aw: Re: Re: [PATCH v2 2/2] arm64: dts: rockchip: Add Bananapi R2 Pro

[Frank Wunderlich]

> Gesendet: Montag, 24. Januar 2022 um 12:03 Uhr
> Von: "Sascha Hauer" <sha at pengutronix.de>

> On Mon, Jan 24, 2022 at 09:55:05AM +0100, Frank Wunderlich wrote:

> > took this from the 3568-EVB (like the most parts, as the board is
> > mostly the same), and in linux it's the same and working. The switch
> > have also phy-id 0 on mdio bus #1, are you sure this is invalid?

just to clarify: in linux dts only the basics were taken from evb and changed if
needed (like iodomain, regulators).
mixed this with the barebox submsission where i mainly used the evb dts.

should i add a note in head that some parts are taken from EVB and vendors dts?
As this is my first new DTS, i want to be sure the legal notice is correct.

> It's not invalid, it's just the broadcast address to which other phys
> might answer as well. Anyway, as long as there's only a single phy on
> the bus it's probably okay.

ok, on mdio0 there is the rtl8211 phy and on mdio1 there is the rtl8367rb switch,
so only 1 device per bus. I was not aware that 0 is broadcast.

regards Frank