[PATCH v3 1/3] dt-bindings: Convert ahci-platform DT bindings to yaml
Frank Wunderlich
linux at fw-web.de
Sun Feb 27 10:27:58 PST 2022
From: Frank Wunderlich <frank-w at public-files.de>
Create a yaml file for dtbs_check from the old txt binding.
Signed-off-by: Frank Wunderlich <frank-w at public-files.de>
---
v3:
- add conversion to sata-series
- fix some errors in dt_binding_check and dtbs_check
- move to unevaluated properties = false
---
imho all errors should be fixed in the dts not in the yaml...
errors about the subitem requirement that was defined in txt but not fixed some marvell dts
some dts for Marvell SoC bring error
'phys' is a required property
'target-supply' is a required property
problem is in arch/arm64/boot/dts/marvell/armada-cp11x.dtsi:331
here the sata-port at 0 is defined, but not overridden with phy/target-supply in any following dts
====================================================================
arch/arm64/boot/dts/broadcom/northstar2
ns2-svk.dt.yaml:
ns2-xmc.dt.yaml:
ahci at 663f2000:
$nodename:0: 'ahci at 663f2000' does not match '^sata(@.*)?$'
Unevaluated properties are not allowed
('reg-names', '#address-cells', '#size-cells' were unexpected)
---
.../devicetree/bindings/ata/ahci-platform.txt | 79 ----------
.../bindings/ata/ahci-platform.yaml | 140 ++++++++++++++++++
2 files changed, 140 insertions(+), 79 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/ata/ahci-platform.txt
create mode 100644 Documentation/devicetree/bindings/ata/ahci-platform.yaml
diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt
deleted file mode 100644
index 77091a277642..000000000000
--- a/Documentation/devicetree/bindings/ata/ahci-platform.txt
+++ /dev/null
@@ -1,79 +0,0 @@
-* AHCI SATA Controller
-
-SATA nodes are defined to describe on-chip Serial ATA controllers.
-Each SATA controller should have its own node.
-
-It is possible, but not required, to represent each port as a sub-node.
-It allows to enable each port independently when dealing with multiple
-PHYs.
-
-Required properties:
-- compatible : compatible string, one of:
- - "brcm,iproc-ahci"
- - "hisilicon,hisi-ahci"
- - "cavium,octeon-7130-ahci"
- - "ibm,476gtr-ahci"
- - "marvell,armada-380-ahci"
- - "marvell,armada-3700-ahci"
- - "snps,dwc-ahci"
- - "snps,spear-ahci"
- - "generic-ahci"
-- interrupts : <interrupt mapping for SATA IRQ>
-- reg : <registers mapping>
-
-Please note that when using "generic-ahci" you must also specify a SoC specific
-compatible:
- compatible = "manufacturer,soc-model-ahci", "generic-ahci";
-
-Optional properties:
-- dma-coherent : Present if dma operations are coherent
-- clocks : a list of phandle + clock specifier pairs
-- resets : a list of phandle + reset specifier pairs
-- target-supply : regulator for SATA target power
-- phy-supply : regulator for PHY power
-- phys : reference to the SATA PHY node
-- phy-names : must be "sata-phy"
-- ahci-supply : regulator for AHCI controller
-- ports-implemented : Mask that indicates which ports that the HBA supports
- are available for software to use. Useful if PORTS_IMPL
- is not programmed by the BIOS, which is true with
- some embedded SOC's.
-
-Required properties when using sub-nodes:
-- #address-cells : number of cells to encode an address
-- #size-cells : number of cells representing the size of an address
-
-Sub-nodes required properties:
-- reg : the port number
-And at least one of the following properties:
-- phys : reference to the SATA PHY node
-- target-supply : regulator for SATA target power
-
-Examples:
- sata at ffe08000 {
- compatible = "snps,spear-ahci";
- reg = <0xffe08000 0x1000>;
- interrupts = <115>;
- };
-
-With sub-nodes:
- sata at f7e90000 {
- compatible = "marvell,berlin2q-achi", "generic-ahci";
- reg = <0xe90000 0x1000>;
- interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&chip CLKID_SATA>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- sata0: sata-port at 0 {
- reg = <0>;
- phys = <&sata_phy 0>;
- target-supply = <®_sata0>;
- };
-
- sata1: sata-port at 1 {
- reg = <1>;
- phys = <&sata_phy 1>;
- target-supply = <®_sata1>;;
- };
- };
diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.yaml b/Documentation/devicetree/bindings/ata/ahci-platform.yaml
new file mode 100644
index 000000000000..cc246b312c59
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/ahci-platform.yaml
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/ahci-platform.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AHCI SATA Controller
+description:
+ SATA nodes are defined to describe on-chip Serial ATA controllers.
+ Each SATA controller should have its own node.
+
+ It is possible, but not required, to represent each port as a sub-node.
+ It allows to enable each port independently when dealing with multiple
+ PHYs.
+
+maintainers:
+ - Hans de Goede <hdegoede at redhat.com>
+ - Jens Axboe <axboe at kernel.dk>
+
+properties:
+ compatible:
+ contains:
+ enum:
+ - brcm,iproc-ahci
+ - cavium,octeon-7130-ahci
+ - generic-ahci
+ - hisilicon,hisi-ahci
+ - ibm,476gtr-ahci
+ - marvell,armada-380-ahci
+ - marvell,armada-3700-ahci
+ - snps,dwc-ahci
+ - snps,spear-ahci
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ maxItems: 3
+
+ interrupts:
+ minItems: 1
+
+ ahci-supply:
+ description:
+ regulator for AHCI controller
+
+ dma-coherent:
+ description:
+ Present if dma operations are coherent
+
+ phy-supply:
+ description:
+ regulator for PHY power
+
+ phys:
+ minItems: 1
+
+ phy-names:
+ minItems: 1
+
+ ports-implemented:
+ description:
+ Mask that indicates which ports that the HBA supports
+ are available for software to use. Useful if PORTS_IMPL
+ is not programmed by the BIOS, which is true with
+ some embedded SoCs.
+ minItems: 1
+
+ resets:
+ minItems: 1
+
+ target-supply:
+ description:
+ regulator for SATA target power
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+patternProperties:
+ "^sata-port@[0-9]+$":
+ type: object
+ description:
+ Subnode with configuration of the Ports.
+
+ properties:
+ reg:
+ maxItems: 1
+
+ phys:
+ minItems: 1
+
+ target-supply:
+ description:
+ regulator for SATA target power
+
+ required:
+ - reg
+
+ anyOf:
+ - required: [ phys ]
+ - required: [ target-supply ]
+
+allOf:
+- $ref: "sata-common.yaml#"
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ sata at ffe08000 {
+ compatible = "snps,spear-ahci";
+ reg = <0xffe08000 0x1000>;
+ interrupts = <115>;
+ };
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/berlin2q.h>
+ sata at f7e90000 {
+ compatible = "marvell,berlin2q-achi", "generic-ahci";
+ reg = <0xe90000 0x1000>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&chip CLKID_SATA>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sata0: sata-port at 0 {
+ reg = <0>;
+ phys = <&sata_phy 0>;
+ target-supply = <®_sata0>;
+ };
+
+ sata1: sata-port at 1 {
+ reg = <1>;
+ phys = <&sata_phy 1>;
+ target-supply = <®_sata1>;
+ };
+ };
--
2.25.1
More information about the Linux-rockchip
mailing list