[PATCH v3] dt-bindings: mfd: rk808: Convert bindings to yaml

[Chris Morgan]

On Wed, Feb 16, 2022 at 12:39:09PM +0000, Robin Murphy wrote:
> On 2022-02-15 21:15, Chris Morgan wrote:
> [...]
> > diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk805.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk805.yaml
> > new file mode 100644
> > index 000000000000..1b928b94fbfd
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk805.yaml
> > @@ -0,0 +1,88 @@
> > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/mfd/rockchip,rk805.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: RK805 Power Management Integrated Circuit
> > +
> > +maintainers:
> > +  - Chris Zhong <zyw at rock-chips.com>
> > +  - Zhang Qing <zhangqing at rock-chips.com>
> > +
> > +description: |
> > +  Rockchip RK805 series PMIC. This device consists of an i2c controlled MFD
> > +  that includes multiple switchable regulators.
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - rockchip,rk805
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  '#clock-cells':
> > +    const: 1
> > +
> > +  clock-output-names:
> > +    maxItems: 2
> 
> I think this should be 1, since RK805 only has a single CLK32K output -
> ditto for RK817.

I've confirmed that some boards use this behavior because of how the
driver is written. Basically they define 2 clocks to ensure the 2nd
clock gets renamed something else, as the first clock doesn't exist
(but the driver won't let them rename a clock without defining the
first clock).

Should I push this patch series forward knowing that issue exists and
then work to update the clock driver, or is that a showstopper? I'm
honestly just trying to get these yaml updates done because I want to
submit a battery driver and I was told they wanted the rk808.txt
rewritten.

I can add examples to each of the other yaml files as well from the
devicetrees as they exist today (I'll just randomly pick one for each
device for which we don't already have an example).

So for now it looks like 2 issues remain though:
1) there are 4 boards that specify a supply regulator that doesn't
exist (rk809 doesn't have vcc13 and vcc14).
2) there are 3 PMICs that use 2 clocks to overcome a driver issue,
even though they only support 1 clock (rk805, rk809, and rk817 only
have one clock output).

> 
> [...]
> > diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml
> > new file mode 100644
> > index 000000000000..f5908fa01a61
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml
> > @@ -0,0 +1,257 @@
> > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/mfd/rockchip,rk808.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: RK808 Power Management Integrated Circuit
> > +
> > +maintainers:
> > +  - Chris Zhong <zyw at rock-chips.com>
> > +  - Zhang Qing <zhangqing at rock-chips.com>
> > +
> > +description: |
> > +  Rockchip RK808 series PMIC. This device consists of an i2c controlled MFD
> > +  that includes regulators, an RTC, and a power button.
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - rockchip,rk808
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  '#clock-cells':
> > +    description:
> > +      See <dt-bindings/clock/rockchip,rk808.h> for clock IDs.
> > +    const: 1
> > +
> > +  clock-output-names:
> > +    description:
> > +      From common clock binding to override the default output clock name.
> 
> minItems should be consistent across RK808/818/819 - when two clocks exist,
> either it's legitimate to rename only the first one, or it isn't. There
> shouldn't be an arbitrary difference just because of what existing DTs
> happen to use.
> 
> > +    maxItems: 2
> > +
> > +  rockchip,system-power-controller:
> > +    type: boolean
> > +    description:
> > +      Telling whether or not this PMIC is controlling the system power.
> > +
> > +  wakeup-source:
> > +    type: boolean
> > +    description:
> > +      Device can be used as a wakeup source.
> > +
> > +  vcc1-supply:
> > +    description:
> > +      The input supply for DCDC_REG1.
> > +
> > +  vcc2-supply:
> > +    description:
> > +      The input supply for DCDC_REG2.
> > +
> > +  vcc3-supply:
> > +    description:
> > +      The input supply for DCDC_REG3.
> > +
> > +  vcc4-supply:
> > +    description:
> > +      The input supply for DCDC_REG4.
> > +
> > +  vcc6-supply:
> > +    description:
> > +      The input supply for LDO_REG1 and LDO_REG2.
> > +
> > +  vcc7-supply:
> > +    description:
> > +      The input supply for LDO_REG3 and LDO_REG7.
> > +
> > +  vcc8-supply:
> > +    description:
> > +      The input supply for SWITCH_REG1.
> > +
> > +  vcc9-supply:
> > +    description:
> > +      The input supply for LDO_REG4 and LDO_REG5.
> > +
> > +  vcc10-supply:
> > +    description:
> > +      The input supply for LDO_REG6.
> > +
> > +  vcc11-supply:
> > +    description:
> > +      The input supply for LDO_REG8.
> > +
> > +  vcc12-supply:
> > +    description:
> > +      The input supply for SWITCH_REG2.
> > +
> > +  vddio-supply:
> > +    description:
> > +      The input supply for digital IO.
> > +
> > +  dvs-gpios:
> > +    description: |
> > +      buck1/2 can be controlled by gpio dvs, this is GPIO specifiers for
> > +      2 host gpio's used for dvs. The format of the gpio specifier
> > +      depends in the gpio controller. If DVS GPIOs aren't present,
> > +      voltage changes will happen very quickly with no slow ramp time.
> > +    maxItems: 2
> > +
> > +  regulators:
> > +    type: object
> > +    patternProperties:
> > +      "^(DCDC_REG[1-4]|LDO_REG[1-8]|SWITCH_REG[1-2])$":
> > +        type: object
> > +        $ref: ../regulator/regulator.yaml#
> > +    unevaluatedProperties: false
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - interrupts
> > +  - "#clock-cells"
> 
> Is this actually required (ditto elsewhere)? Technically it's only necessary
> if there are any clock consumers targeting this node, so arguably it should
> be the clock binding's responsibility to validate that.
> 
> It wouldn't make much sense for a dedicated clock controller to omit
> #clock-cells such that it couldn't have any consumers, but given that these
> things are primarily PMICs I think it's reasonable to allow a board not to
> care about the clocks at all if it doesn't use them. I know that the
> original binding claimed it was required, but if we're already relaxing that
> for RK805 here then we may as well relax it entirely.
> 
> Cheers,
> Robin.