[PATCH v6 07/17] dt-bindings: display: rockchip: convert analogix_dp-rockchip.txt to yaml

[Johan Jonker]

Convert analogix_dp-rockchip.txt to yaml.

Changed:
  Add power-domains property
  File name

Signed-off-by: Johan Jonker <jbx6244 at gmail.com>
---
 .../display/rockchip/analogix_dp-rockchip.txt |  98 -----------------
 .../rockchip/rockchip,analogix-dp.yaml        | 103 ++++++++++++++++++
 2 files changed, 103 insertions(+), 98 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
 create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip,analogix-dp.yaml

diff --git a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
deleted file mode 100644
index 43561584c..000000000
--- a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
+++ /dev/null
@@ -1,98 +0,0 @@
-Rockchip RK3288 specific extensions to the Analogix Display Port
-================================
-
-Required properties:
-- compatible: "rockchip,rk3288-dp",
-	      "rockchip,rk3399-edp";
-
-- reg: physical base address of the controller and length
-
-- clocks: from common clock binding: handle to dp clock.
-	  of memory mapped region.
-
-- clock-names: from common clock binding:
-	       Required elements: "dp" "pclk"
-
-- resets: Must contain an entry for each entry in reset-names.
-	  See ../reset/reset.txt for details.
-
-- pinctrl-names: Names corresponding to the chip hotplug pinctrl states.
-- pinctrl-0: pin-control mode. should be <&edp_hpd>
-
-- reset-names: Must include the name "dp"
-
-- rockchip,grf: this soc should set GRF regs, so need get grf here.
-
-- ports: there are 2 port nodes with endpoint definitions as defined in
-  Documentation/devicetree/bindings/media/video-interfaces.txt.
-    Port 0: contained 2 endpoints, connecting to the output of vop.
-    Port 1: contained 1 endpoint, connecting to the input of panel.
-
-Optional property for different chips:
-- clocks: from common clock binding: handle to grf_vio clock.
-
-- clock-names: from common clock binding:
-	       Required elements: "grf"
-
-For the below properties, please refer to Analogix DP binding document:
- * Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
-- phys (required)
-- phy-names (required)
-- hpd-gpios (optional)
-- force-hpd (optional)
--------------------------------------------------------------------------------
-
-Example:
-	dp-controller: dp at ff970000 {
-		compatible = "rockchip,rk3288-dp";
-		reg = <0xff970000 0x4000>;
-		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru SCLK_EDP>, <&cru PCLK_EDP_CTRL>;
-		clock-names = "dp", "pclk";
-		phys = <&dp_phy>;
-		phy-names = "dp";
-
-		rockchip,grf = <&grf>;
-		resets = <&cru 111>;
-		reset-names = "dp";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&edp_hpd>;
-
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			edp_in: port at 0 {
-				reg = <0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				edp_in_vopb: endpoint at 0 {
-					reg = <0>;
-					remote-endpoint = <&vopb_out_edp>;
-				};
-				edp_in_vopl: endpoint at 1 {
-					reg = <1>;
-					remote-endpoint = <&vopl_out_edp>;
-				};
-			};
-
-			edp_out: port at 1 {
-				reg = <1>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				edp_out_panel: endpoint {
-					reg = <0>;
-					remote-endpoint = <&panel_in_edp>
-				};
-			};
-		};
-	};
-
-	pinctrl {
-		edp {
-			edp_hpd: edp-hpd {
-				rockchip,pins = <7 11 RK_FUNC_2 &pcfg_pull_none>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,analogix-dp.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,analogix-dp.yaml
new file mode 100644
index 000000000..60dedf9b2
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,analogix-dp.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip,analogix-dp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip specific extensions to the Analogix Display Port
+
+maintainers:
+  - Sandy Huang <hjc at rock-chips.com>
+  - Heiko Stuebner <heiko at sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3288-dp
+      - rockchip,rk3399-edp
+
+  clocks:
+    minItems: 2
+    maxItems: 3
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: dp
+      - const: pclk
+      - const: grf
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: dp
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      This SoC makes use of GRF regs.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - rockchip,grf
+
+allOf:
+  - $ref: /schemas/display/bridge/analogix,dp.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3288-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    dp at ff970000 {
+      compatible = "rockchip,rk3288-dp";
+      reg = <0xff970000 0x4000>;
+      interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru SCLK_EDP>, <&cru PCLK_EDP_CTRL>;
+      clock-names = "dp", "pclk";
+      phys = <&dp_phy>;
+      phy-names = "dp";
+      resets = <&cru 111>;
+      reset-names = "dp";
+      rockchip,grf = <&grf>;
+      pinctrl-0 = <&edp_hpd>;
+      pinctrl-names = "default";
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        edp_in: port at 0 {
+          reg = <0>;
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          edp_in_vopb: endpoint at 0 {
+            reg = <0>;
+            remote-endpoint = <&vopb_out_edp>;
+          };
+          edp_in_vopl: endpoint at 1 {
+            reg = <1>;
+            remote-endpoint = <&vopl_out_edp>;
+          };
+        };
+
+        edp_out: port at 1 {
+          reg = <1>;
+
+          edp_out_panel: endpoint {
+            remote-endpoint = <&panel_in_edp>;
+          };
+        };
+      };
+    };
--
2.20.1