[PATCH v3] dt-bindings: display: rockchip: convert rockchip-lvds.txt to YAML

[Krzysztof Kozlowski]

On 19/12/2022 13:32, Johan Jonker wrote:
> Convert rockchip-lvds.txt to YAML.
> 
> Changed:
>   Add power-domains property.
>   Requirements between PX30 and RK3288
> 
> Signed-off-by: Johan Jonker <jbx6244 at gmail.com>
> ---
> 
> Changed V3:
>   Filename matching compatible style
>   Drop "Regulator phandle for "
>   Specify properties and requirements per SoC
>   Sort order and restyle
> 
> Changed V2:
>   Fix title
> ---
>  .../display/rockchip/rockchip,lvds.yaml       | 170 ++++++++++++++++++
>  .../display/rockchip/rockchip-lvds.txt        |  92 ----------
>  2 files changed, 170 insertions(+), 92 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip,lvds.yaml
>  delete mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt
> 
> diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,lvds.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,lvds.yaml
> new file mode 100644
> index 000000000..03b002a05
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,lvds.yaml
> @@ -0,0 +1,170 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/rockchip/rockchip,lvds.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Rockchip low-voltage differential signal (LVDS) transmitter
> +
> +maintainers:
> +  - Sandy Huang <hjc at rock-chips.com>
> +  - Heiko Stuebner <heiko at sntech.de>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - rockchip,px30-lvds
> +      - rockchip,rk3288-lvds
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  clock-names:
> +    const: pclk_lvds
> +
> +  avdd1v0-supply:
> +    description: 1.0V analog power.
> +
> +  avdd1v8-supply:
> +    description: 1.8V analog power.
> +
> +  avdd3v3-supply:
> +    description: 3.3V analog power.
> +
> +  rockchip,grf:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description: Phandle to the general register files syscon.
> +
> +  rockchip,output:
> +    $ref: /schemas/types.yaml#/definitions/string
> +    enum: [rgb, lvds, duallvds]
> +    description: This describes the output interface.
> +
> +  phys:
> +    maxItems: 1
> +
> +  phy-names:
> +    const: dphy
> +
> +  pinctrl-names:
> +    const: lcdc
> +
> +  pinctrl-0: true
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    properties:
> +      port at 0:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description:
> +          Video port 0 for the VOP input.
> +          The remote endpoint maybe vopb or vopl.
> +
> +      port at 1:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description:
> +          Video port 1 for either a panel or subsequent encoder.
> +
> +    required:
> +      - port at 0
> +      - port at 1
> +
> +required:
> +  - compatible
> +  - rockchip,grf
> +  - rockchip,output
> +  - ports
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: rockchip,px30-lvds
> +
> +    then:
> +      properties:
> +        reg: false
> +        clocks: false
> +        clock-names: false
> +        avdd1v0-supply: false
> +        avdd1v8-supply: false
> +        avdd3v3-supply: false
> +

I see one compatible expects regmap from parent (grf is the parent here)
and other is directly on MMIO bus. Not the best combination... Maybe
this  should be just split to two separate bindings? Looking at driver,
their code is also very different between these two variants.

Best regards,
Krzysztof