[PATCH v10 28/33] arm64: dts: rockchip: rk3399: add crypto node

[Rob Herring]

On Tue, Sep 27, 2022 at 2:56 AM Corentin Labbe <clabbe at baylibre.com> wrote:
>
> The rk3399 has a crypto IP handled by the rk3288 crypto driver so adds a
> node for it.
>
> Tested-by Diederik de Haas <didi.debian at cknow.org>
> Signed-off-by: Corentin Labbe <clabbe at baylibre.com>
> ---
>  arch/arm64/boot/dts/rockchip/rk3399.dtsi | 20 ++++++++++++++++++++
>  1 file changed, 20 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> index 92c2207e686c..4391aea25984 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> @@ -582,6 +582,26 @@ saradc: saradc at ff100000 {
>                 status = "disabled";
>         };
>
> +       crypto0: crypto at ff8b0000 {
> +               compatible = "rockchip,rk3399-crypto";
> +               reg = <0x0 0xff8b0000 0x0 0x4000>;
> +               interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH 0>;
> +               clocks = <&cru HCLK_M_CRYPTO0>, <&cru HCLK_S_CRYPTO0>, <&cru SCLK_CRYPTO0>;
> +               clock-names = "hclk_master", "hclk_slave", "sclk";
> +               resets = <&cru SRST_CRYPTO0>, <&cru SRST_CRYPTO0_S>, <&cru SRST_CRYPTO0_M>;
> +               reset-names = "master", "lave", "crypto";

This doesn't match the binding:

crypto at ff8b8000: reset-names:2: 'crypto-rst' was expected
crypto at ff8b0000: reset-names:2: 'crypto-rst' was expected
crypto at ff8b0000: reset-names:1: 'slave' was expected

Rob