[PATCH 4/7] thermal: rockchip: Simplify channel id logic
Sebastian Reichel
sebastian.reichel at collabora.com
Tue Dec 6 09:02:32 PST 2022
Hi,
On Tue, Nov 15, 2022 at 12:30:51PM +0100, Heiko Stuebner wrote:
> Am Montag, 31. Oktober 2022, 18:50:55 CET schrieb Sebastian Reichel:
> > Replace the channel ID lookup table by a simple offset, since
> > the channel IDs are consecutive.
>
> Hmm, I don't really like going this way.
>
> While it may be true _right now_ that all tsadcs have the cpu-sensor
> at channel "x" and the gpu-sensor at "x+1", hardware engineers are
> always waaaaay too creative in what they do.
>
> So I really expect a future soc to turn this around or add other
> "interesting" variants.
It's totally fine to have it the other way around. Then the first
channel will be the GPU (or even the first channels if there are
multiple measurement points for the GPU). Those are just arbitrary
numbers. The only requirement of this patch is that there are no
gaps.
Supporting gaps can only be done with a lookup table, which wastes
memory. Considering there are no such devices right now and there
never might be any, is there a good reason for the added complexity?
-- Sebastian
> > Signed-off-by: Sebastian Reichel <sebastian.reichel at collabora.com>
> > ---
> > drivers/thermal/rockchip_thermal.c | 48 +++++++++++++-----------------
> > 1 file changed, 21 insertions(+), 27 deletions(-)
> >
> > diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
> > index 3dab31f163b3..a547e44e2b64 100644
> > --- a/drivers/thermal/rockchip_thermal.c
> > +++ b/drivers/thermal/rockchip_thermal.c
> > @@ -39,15 +39,6 @@ enum tshut_polarity {
> > TSHUT_HIGH_ACTIVE,
> > };
> >
> > -/*
> > - * The system has two Temperature Sensors.
> > - * sensor0 is for CPU, and sensor1 is for GPU.
> > - */
> > -enum sensor_id {
> > - SENSOR_CPU = 0,
> > - SENSOR_GPU,
> > -};
> > -
> > /*
> > * The conversion table has the adc value and temperature.
> > * ADC_DECREMENT: the adc value is of diminishing.(e.g. rk3288_code_table)
> > @@ -82,7 +73,7 @@ struct chip_tsadc_table {
> >
> > /**
> > * struct rockchip_tsadc_chip - hold the private data of tsadc chip
> > - * @chn_id: array of sensor ids of chip corresponding to the channel
> > + * @chn_offset: the channel offset of the first channel
> > * @chn_num: the channel number of tsadc chip
> > * @tshut_temp: the hardware-controlled shutdown temperature value
> > * @tshut_mode: the hardware-controlled shutdown mode (0:CRU 1:GPIO)
> > @@ -98,7 +89,7 @@ struct chip_tsadc_table {
> > */
> > struct rockchip_tsadc_chip {
> > /* The sensor id of chip correspond to the ADC channel */
> > - int chn_id[SOC_MAX_SENSORS];
> > + int chn_offset;
> > int chn_num;
> >
> > /* The hardware-controlled tshut property */
> > @@ -925,8 +916,8 @@ static void rk_tsadcv2_tshut_mode(int chn, void __iomem *regs,
> > }
> >
> > static const struct rockchip_tsadc_chip px30_tsadc_data = {
> > - .chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
> > - .chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
> > + /* cpu, gpu */
> > + .chn_offset = 0,
> > .chn_num = 2, /* 2 channels for tsadc */
> >
> > .tshut_mode = TSHUT_MODE_CRU, /* default TSHUT via CRU */
> > @@ -949,7 +940,8 @@ static const struct rockchip_tsadc_chip px30_tsadc_data = {
> > };
> >
> > static const struct rockchip_tsadc_chip rv1108_tsadc_data = {
> > - .chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
> > + /* cpu */
> > + .chn_offset = 0,
> > .chn_num = 1, /* one channel for tsadc */
> >
> > .tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
> > @@ -973,7 +965,8 @@ static const struct rockchip_tsadc_chip rv1108_tsadc_data = {
> > };
> >
> > static const struct rockchip_tsadc_chip rk3228_tsadc_data = {
> > - .chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
> > + /* cpu */
> > + .chn_offset = 0,
> > .chn_num = 1, /* one channel for tsadc */
> >
> > .tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
> > @@ -997,8 +990,8 @@ static const struct rockchip_tsadc_chip rk3228_tsadc_data = {
> > };
> >
> > static const struct rockchip_tsadc_chip rk3288_tsadc_data = {
> > - .chn_id[SENSOR_CPU] = 1, /* cpu sensor is channel 1 */
> > - .chn_id[SENSOR_GPU] = 2, /* gpu sensor is channel 2 */
> > + /* cpu, gpu */
> > + .chn_offset = 1,
> > .chn_num = 2, /* two channels for tsadc */
> >
> > .tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
> > @@ -1022,7 +1015,8 @@ static const struct rockchip_tsadc_chip rk3288_tsadc_data = {
> > };
> >
> > static const struct rockchip_tsadc_chip rk3328_tsadc_data = {
> > - .chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
> > + /* cpu */
> > + .chn_offset = 0,
> > .chn_num = 1, /* one channels for tsadc */
> >
> > .tshut_mode = TSHUT_MODE_CRU, /* default TSHUT via CRU */
> > @@ -1045,8 +1039,8 @@ static const struct rockchip_tsadc_chip rk3328_tsadc_data = {
> > };
> >
> > static const struct rockchip_tsadc_chip rk3366_tsadc_data = {
> > - .chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
> > - .chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
> > + /* cpu, gpu */
> > + .chn_offset = 0,
> > .chn_num = 2, /* two channels for tsadc */
> >
> > .tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
> > @@ -1070,8 +1064,8 @@ static const struct rockchip_tsadc_chip rk3366_tsadc_data = {
> > };
> >
> > static const struct rockchip_tsadc_chip rk3368_tsadc_data = {
> > - .chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
> > - .chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
> > + /* cpu, gpu */
> > + .chn_offset = 0,
> > .chn_num = 2, /* two channels for tsadc */
> >
> > .tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
> > @@ -1095,8 +1089,8 @@ static const struct rockchip_tsadc_chip rk3368_tsadc_data = {
> > };
> >
> > static const struct rockchip_tsadc_chip rk3399_tsadc_data = {
> > - .chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
> > - .chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
> > + /* cpu, gpu */
> > + .chn_offset = 0,
> > .chn_num = 2, /* two channels for tsadc */
> >
> > .tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
> > @@ -1120,8 +1114,8 @@ static const struct rockchip_tsadc_chip rk3399_tsadc_data = {
> > };
> >
> > static const struct rockchip_tsadc_chip rk3568_tsadc_data = {
> > - .chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
> > - .chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
> > + /* cpu, gpu */
> > + .chn_offset = 0,
> > .chn_num = 2, /* two channels for tsadc */
> >
> > .tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
> > @@ -1406,7 +1400,7 @@ static int rockchip_thermal_probe(struct platform_device *pdev)
> > for (i = 0; i < thermal->chip->chn_num; i++) {
> > error = rockchip_thermal_register_sensor(pdev, thermal,
> > &thermal->sensors[i],
> > - thermal->chip->chn_id[i]);
> > + thermal->chip->chn_offset + i);
> > if (error)
> > return dev_err_probe(&pdev->dev, error,
> > "failed to register sensor[%d].\n", i);
> >
>
>
>
>
>
> --
> To unsubscribe, send mail to kernel-unsubscribe at lists.collabora.co.uk.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-rockchip/attachments/20221206/df6fdb4f/attachment-0001.sig>
More information about the Linux-rockchip
mailing list