[PATCH v2 3/3] arm64: dts: rockchip: Add initial support for Pine64 PinePhone Pro

[Krzysztof Kozlowski]

On 06/08/2022 01:44, Tom Fitzhenry wrote:

Thank you for your patch. There is something to discuss/improve.

> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
> new file mode 100644
> index 0000000000000..f5608487ad58f
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
> @@ -0,0 +1,385 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2020 Martijn Braam <martijn at brixit.nl>
> + * Copyright (c) 2021 Kamil Trzciński <ayufan at ayufan.eu>
> + */
> +
> +// PinePhone Pro datasheet: https://files.pine64.org/doc/PinePhonePro/PinephonePro-Schematic-V1.0-20211127.pdf
> +
> +/dts-v1/;
> +#include <dt-bindings/input/gpio-keys.h>
> +#include <dt-bindings/input/linux-event-codes.h>
> +#include "rk3399.dtsi"
> +#include "rk3399-t-opp.dtsi"
> +
> +/ {
> +	model = "Pine64 PinePhonePro";
> +	compatible = "pine64,pinephone-pro", "rockchip,rk3399";
> +	chassis-type = "handset";
> +
> +	aliases {
> +                mmc0 = &sdio0;
> +                mmc1 = &sdmmc;
> +                mmc2 = &sdhci;
> +        };
> +
> +	chosen {
> +		stdout-path = "serial2:115200n8";
> +	};
> +
> +	gpio-key-power {

Just gpio-keys like all sources are doing.

> +		compatible = "gpio-keys";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pwrbtn_pin>;
> +
> +		power {

Schema requires generic naming. Either "key" or "key-0" or "key-power"

> +			debounce-interval = <20>;
> +			// Per "PMU Controler", page 4.
> +			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
> +			label = "Power";
> +			linux,code = <KEY_POWER>;
> +			wakeup-source;
> +		};
> +	};
> +
> +	/* Power tree */
> +	/* Root power source */
> +	vcc_sysin: vcc-sysin {

regulator-vcc-sysin

https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation

> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc_sysin";
> +		regulator-always-on;
> +		regulator-boot-on;
> +	};
> +
> +	/* Main 3.3v supply */
> +	vcc3v3_sys: wifi_bat: vcc3v3-sys {

regulator-.....

> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc3v3_sys";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		vin-supply = <&vcc_sysin>;
> +	};
> +
> +	vcca1v8_s3: vcc1v8-s3 {

regulator-.....

> +		compatible = "regulator-fixed";
> +		regulator-name = "vcca1v8_s3";
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +		vin-supply = <&vcc3v3_sys>;
> +		regulator-always-on;
> +		regulator-boot-on;
> +	};
> +};
> +
Best regards,
Krzysztof