[PATCH v1] net: phy: fix motorcomm module automatic loading

[Andrew Lunn]

> Good Morning,
> 
> After testing various configurations I found what is actually
> happening here. When libphy is built in but the phy drivers are
> modules and not available in the initrd, the generic phy driver binds
> here. This allows the phy to come up but it is not functional.

What MAC are you using?

Why is you interface being brought up by the initramfs? Are you using
NFS root from within the initramfs?

What normally happens is that the kernel loads, maybe with the MAC
driver and phylib loading, as part of the initramfs. The other modules
in the initramfs allow the root filesystem to be found, mounted, and
pivoted into it. The MAC driver is then brought up by the initscripts,
which causes phylib to request the needed PHY driver modules, it loads
and all is good.

If you are using NFS root, then the load of the PHY driver happens
earlier, inside the initramfs. If this is you situation, maybe the
correct fix is to teach the initramfs tools to include the PHY drivers
when NFS root is being used?

     Andrew