[PATCH v2 15/23] media: rkvdec: h264: Validate and use pic width and height in mbs

[Ezequiel Garcia]

Hi Nicolas,

On Thu, Mar 31, 2022 at 03:37:17PM -0400, Nicolas Dufresne wrote:
> From: Jonas Karlman <jonas at kwiboo.se>
> 
> The width and height in macroblocks is currently configured based on OUTPUT
> buffer resolution, this works for frame pictures but can cause issues for
> field pictures.
> 
> When frame_mbs_only_flag is 0 the height in mbs should be height of
> the field instead of height of frame.
> 
> Validate pic_width_in_mbs_minus1 and pic_height_in_map_units_minus1
> against OUTPUT buffer resolution and use these values to configure HW.
> 
> Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
> Signed-off-by: Nicolas Dufresne <nicolas.dufresne at collabora.com>
> Reviewed-by: Sebastian Fricke <sebastian.fricke at collabora.com>
> ---
>  drivers/staging/media/rkvdec/rkvdec-h264.c |  4 ++--
>  drivers/staging/media/rkvdec/rkvdec.c      | 10 ++++++++++
>  2 files changed, 12 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/staging/media/rkvdec/rkvdec-h264.c b/drivers/staging/media/rkvdec/rkvdec-h264.c
> index 8d44a884a52e..a42cf19bcc6d 100644
> --- a/drivers/staging/media/rkvdec/rkvdec-h264.c
> +++ b/drivers/staging/media/rkvdec/rkvdec-h264.c
> @@ -672,8 +672,8 @@ static void assemble_hw_pps(struct rkvdec_ctx *ctx,
>  		  LOG2_MAX_PIC_ORDER_CNT_LSB_MINUS4);
>  	WRITE_PPS(!!(sps->flags & V4L2_H264_SPS_FLAG_DELTA_PIC_ORDER_ALWAYS_ZERO),
>  		  DELTA_PIC_ORDER_ALWAYS_ZERO_FLAG);
> -	WRITE_PPS(DIV_ROUND_UP(ctx->coded_fmt.fmt.pix_mp.width, 16), PIC_WIDTH_IN_MBS);
> -	WRITE_PPS(DIV_ROUND_UP(ctx->coded_fmt.fmt.pix_mp.height, 16), PIC_HEIGHT_IN_MBS);

Please add a comment so we don't forget why we use the bitstream
fields here.

> +	WRITE_PPS(sps->pic_width_in_mbs_minus1 + 1, PIC_WIDTH_IN_MBS);
> +	WRITE_PPS(sps->pic_height_in_map_units_minus1 + 1, PIC_HEIGHT_IN_MBS);
>  	WRITE_PPS(!!(sps->flags & V4L2_H264_SPS_FLAG_FRAME_MBS_ONLY),
>  		  FRAME_MBS_ONLY_FLAG);
>  	WRITE_PPS(!!(sps->flags & V4L2_H264_SPS_FLAG_MB_ADAPTIVE_FRAME_FIELD),
> diff --git a/drivers/staging/media/rkvdec/rkvdec.c b/drivers/staging/media/rkvdec/rkvdec.c
> index 2df8cf4883e2..1b805710e195 100644
> --- a/drivers/staging/media/rkvdec/rkvdec.c
> +++ b/drivers/staging/media/rkvdec/rkvdec.c
> @@ -29,8 +29,11 @@
>  
>  static int rkvdec_try_ctrl(struct v4l2_ctrl *ctrl)
>  {
> +	struct rkvdec_ctx *ctx = container_of(ctrl->handler, struct rkvdec_ctx, ctrl_hdl);
> +
>  	if (ctrl->id == V4L2_CID_STATELESS_H264_SPS) {
>  		const struct v4l2_ctrl_h264_sps *sps = ctrl->p_new.p_h264_sps;
> +		unsigned int width, height;
>  		/*
>  		 * TODO: The hardware supports 10-bit and 4:2:2 profiles,
>  		 * but it's currently broken in the driver.
> @@ -45,6 +48,13 @@ static int rkvdec_try_ctrl(struct v4l2_ctrl *ctrl)
>  		if (sps->bit_depth_luma_minus8 != 0)
>  			/* Only 8-bit is supported */
>  			return -EINVAL;
> +
> +		width = (sps->pic_width_in_mbs_minus1 + 1) * 16;
> +		height = (sps->pic_height_in_map_units_minus1 + 1) * 16;
> +

Let's please add a comment here, clarifying it's legal to check
the coded format (OUTPUT queue format) at .try_ctrl time,
because the stateless decoder specification [1] mandates
S_FMT on the OUTPUT queue, before passing the SPS/PPS controls.

[1] https://www.kernel.org/doc/html/latest/userspace-api/media/v4l/dev-stateless-decoder.html

> +		if (width > ctx->coded_fmt.fmt.pix_mp.width ||
> +		    height > ctx->coded_fmt.fmt.pix_mp.height)

Can you add a debug message or error message?
These silent errors tend to get super hard to track.

With these changes:

Reviewed-by: Ezequiel Garcia <ezequiel at vanguardiasur.com.ar>

Thanks,
Ezequiel