[RESEND PATCH] i2c: rk3x: Handle a spurious start completion interrupt flag

[Wolfram Sang]

On Fri, Sep 24, 2021 at 01:15:27PM +0200, Ondrej Jirman wrote:
> In a typical read transfer, start completion flag is being set after
> read finishes (notice ipd bit 4 being set):
> 
> trasnfer poll=0
> i2c start
> rk3x-i2c fdd40000.i2c: IRQ: state 1, ipd: 10
> i2c read
> rk3x-i2c fdd40000.i2c: IRQ: state 2, ipd: 1b
> i2c stop
> rk3x-i2c fdd40000.i2c: IRQ: state 4, ipd: 33
> 
> This causes I2C transfer being aborted in polled mode from a stop completion
> handler:
> 
> trasnfer poll=1
> i2c start
> rk3x-i2c fdd40000.i2c: IRQ: state 1, ipd: 10
> i2c read
> rk3x-i2c fdd40000.i2c: IRQ: state 2, ipd: 0
> rk3x-i2c fdd40000.i2c: IRQ: state 2, ipd: 1b
> i2c stop
> rk3x-i2c fdd40000.i2c: IRQ: state 4, ipd: 13
> i2c stop
> rk3x-i2c fdd40000.i2c: unexpected irq in STOP: 0x10
> 
> Clearing the START flag after read fixes the issue without any obvious
> side effects.
> 
> This issue was dicovered on RK3566 when adding support for powering
> off the RK817 PMIC.
> 
> Signed-off-by: Ondrej Jirman <megous at megous.com>

Applied to for-current, thanks!

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-rockchip/attachments/20211130/d351a316/attachment.sig>