[PATCH 05/10] media: hantro: add support for Rockchip RK3036
Ezequiel Garcia
ezequiel at collabora.com
Wed May 26 03:28:23 PDT 2021
Hi Alex,
Thanks a lot for the patch.
On Tue, 2021-05-25 at 17:22 +0200, Alex Bee wrote:
> RK3036's VPU IP block is the same as RK3288 has, except that it doesn't
> have an encoder, decoding is supported up to 1920x1088 only and the axi
> clock can be set to 300 MHz max.
>
> Add a new RK3036 variant which reflect this differences.
>
> Signed-off-by: Alex Bee <knaerzche at gmail.com>
> ---
> drivers/staging/media/hantro/hantro_drv.c | 1 +
> drivers/staging/media/hantro/hantro_hw.h | 1 +
> drivers/staging/media/hantro/rk3288_vpu_hw.c | 49 ++++++++++++++++++++
> 3 files changed, 51 insertions(+)
>
> diff --git a/drivers/staging/media/hantro/hantro_drv.c b/drivers/staging/media/hantro/hantro_drv.c
> index 38ea7b24036e..4f3c08e85bb8 100644
> --- a/drivers/staging/media/hantro/hantro_drv.c
> +++ b/drivers/staging/media/hantro/hantro_drv.c
> @@ -490,6 +490,7 @@ static const struct of_device_id of_hantro_match[] = {
> { .compatible = "rockchip,rk3328-vpu", .data = &rk3328_vpu_variant, },
> { .compatible = "rockchip,rk3288-vpu", .data = &rk3288_vpu_variant, },
> { .compatible = "rockchip,rk3066-vpu", .data = &rk3066_vpu_variant, },
> + { .compatible = "rockchip,rk3036-vpu", .data = &rk3036_vpu_variant, },
> #endif
> #ifdef CONFIG_VIDEO_HANTRO_IMX8M
> { .compatible = "nxp,imx8mq-vpu", .data = &imx8mq_vpu_variant, },
> diff --git a/drivers/staging/media/hantro/hantro_hw.h b/drivers/staging/media/hantro/hantro_hw.h
> index de2bc367a15a..d8d6b0d3c3b3 100644
> --- a/drivers/staging/media/hantro/hantro_hw.h
> +++ b/drivers/staging/media/hantro/hantro_hw.h
> @@ -164,6 +164,7 @@ extern const struct hantro_variant rk3399_vpu_variant;
> extern const struct hantro_variant rk3328_vpu_variant;
> extern const struct hantro_variant rk3288_vpu_variant;
> extern const struct hantro_variant rk3066_vpu_variant;
> +extern const struct hantro_variant rk3036_vpu_variant;
> extern const struct hantro_variant imx8mq_vpu_variant;
> extern const struct hantro_variant sama5d4_vdec_variant;
>
> diff --git a/drivers/staging/media/hantro/rk3288_vpu_hw.c b/drivers/staging/media/hantro/rk3288_vpu_hw.c
> index 29805c4bd92f..c4684df4e012 100644
> --- a/drivers/staging/media/hantro/rk3288_vpu_hw.c
> +++ b/drivers/staging/media/hantro/rk3288_vpu_hw.c
> @@ -174,6 +174,13 @@ static irqreturn_t rk3288_vepu_irq(int irq, void *dev_id)
> return IRQ_HANDLED;
> }
>
> +static int rk3036_vpu_hw_init(struct hantro_dev *vpu)
> +{
> + /* Bump ACLKs to max. possible freq. to improve performance. */
> + clk_set_rate(vpu->clocks[0].clk, RK3066_ACLK_MAX_FREQ);
> + return 0;
> +}
> +
> static int rk3066_vpu_hw_init(struct hantro_dev *vpu)
> {
> /* Bump ACLKs to max. possible freq. to improve performance. */
> @@ -209,6 +216,27 @@ static void rk3288_vpu_enc_reset(struct hantro_ctx *ctx)
> /*
> * Supported codec ops.
> */
> +static const struct hantro_codec_ops rk3036_vpu_codec_ops[] = {
> + [HANTRO_MODE_H264_DEC] = {
> + .run = hantro_g1_h264_dec_run,
> + .reset = hantro_g1_reset,
> + .init = hantro_h264_dec_init,
> + .exit = hantro_h264_dec_exit,
> + },
> + [HANTRO_MODE_MPEG2_DEC] = {
> + .run = hantro_g1_mpeg2_dec_run,
> + .reset = hantro_g1_reset,
> + .init = hantro_mpeg2_dec_init,
> + .exit = hantro_mpeg2_dec_exit,
> + },
> + [HANTRO_MODE_VP8_DEC] = {
> + .run = hantro_g1_vp8_dec_run,
> + .reset = hantro_g1_reset,
> + .init = hantro_vp8_dec_init,
> + .exit = hantro_vp8_dec_exit,
> + },
> +};
> +
> static const struct hantro_codec_ops rk3066_vpu_codec_ops[] = {
> [HANTRO_MODE_JPEG_ENC] = {
> .run = hantro_h1_jpeg_enc_run,
> @@ -269,6 +297,10 @@ static const struct hantro_codec_ops rk3288_vpu_codec_ops[] = {
> * VPU variant.
> */
>
> +static const struct hantro_irq rk3036_irqs[] = {
> + { "vdpu", hantro_g1_irq },
> +};
> +
> static const struct hantro_irq rk3288_irqs[] = {
> { "vepu", rk3288_vepu_irq },
> { "vdpu", hantro_g1_irq },
> @@ -283,6 +315,23 @@ static const char * const rk3288_clk_names[] = {
> "aclk", "hclk"
> };
>
> +const struct hantro_variant rk3036_vpu_variant = {
> + .dec_offset = 0x400,
If it doesn't have an encoder, then you should just
use dec_offset = 0x0.
Thanks,
Ezequiel
More information about the Linux-rockchip
mailing list