[PATCH 2/3] arm64: dts: rockchip: Add RK3399 Rock Pi 4a plus board

[Heiko Stübner]

Am Donnerstag, 17. Juni 2021, 06:49:54 CEST schrieb Alex Bee:
> Rock Pi 4a plus board is the successor of Rock Pi 4a board.
> 
> Differences to the original version are
> - has RK3399 OP1 SoC revision
> - has eMMC (16 or 32 GB) soldered on board (no changes required,
>   since it is enabled in rk3399-rock-pi-4.dtsi)
> - dev boards have SPI flash soldered, but as per manufacturer response,
>   this won't be the case for mass production boards
> 
> I didn't add yet another compatible, since the small set of differences
> are captured by the device tree.
> 
> Signed-off-by: Alex Bee <knaerzche at gmail.com>
> ---
>  arch/arm64/boot/dts/rockchip/Makefile              |  1 +
>  .../boot/dts/rockchip/rk3399-rock-pi-4a-plus.dts   | 14 ++++++++++++++
>  2 files changed, 15 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4a-plus.dts
> 
> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> index c3e00c0e2db7..dbd7d37950f1 100644
> --- a/arch/arm64/boot/dts/rockchip/Makefile
> +++ b/arch/arm64/boot/dts/rockchip/Makefile
> @@ -43,6 +43,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-mezzanine.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4a.dtb
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4a-plus.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4b.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4c.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4a-plus.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4a-plus.dts
> new file mode 100644
> index 000000000000..2deaab7f9307
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4a-plus.dts
> @@ -0,0 +1,14 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2019 Akash Gajjar <Akash_Gajjar at mentor.com>
> + * Copyright (c) 2019 Pragnesh Patel <Pragnesh_Patel at mentor.com>
> + */
> +
> +/dts-v1/;
> +#include "rk3399-rock-pi-4.dtsi"
> +#include "rk3399-op1-opp.dtsi"
> +
> +/ {
> +	model = "Radxa ROCK Pi 4A plus";
> +	compatible = "radxa,rockpi4a", "radxa,rockpi4", "rockchip,rk3399";

hmm, I don't really follow why you're re-using the radxa,rockpi4a
compatible. I'd assume this should be radxa,rockpi4a+ or something?

I.e. if a bootloader needs to select the matching devicetree from a list
of available devicetrees, this could end up running a regular rockpi4a
(without +) using the OP1 operating points and thus at way too high
frequencies.


Heiko


> +};
>