[PATCH AUTOSEL 5.13 005/108] arm64: dts: rockchip: Use only supported PCIe link speed on rk3399

[Sasha Levin]

From: Peter Robinson <pbrobinson at gmail.com>

[ Upstream commit 954d5986afa50c178ea7554e6abdd611d08f5ade ]

The max link speed supported by the rk3399 is already set in the
rk3399.dtsi file so don't set unsupported link speeds in device
specific DTs. This is the same fix as 642fb27.

Signed-off-by: Peter Robinson <pbrobinson at gmail.com>
Link: https://lore.kernel.org/r/20210413141709.845592-1-pbrobinson@gmail.com
Signed-off-by: Heiko Stuebner <heiko at sntech.de>
Signed-off-by: Sasha Levin <sashal at kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi      | 1 -
 arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi    | 1 -
 arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi | 1 -
 3 files changed, 3 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
index 16fd58c4a80f..8c0ff6c96e03 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
@@ -510,7 +510,6 @@ &pcie_phy {
 };
 
 &pcie0 {
-	max-link-speed = <2>;
 	num-lanes = <2>;
 	vpcie0v9-supply = <&vcca0v9_s3>;
 	vpcie1v8-supply = <&vcca1v8_s3>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
index 7d0a7c697703..b28888ea9262 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
@@ -474,7 +474,6 @@ &pcie_phy {
 
 &pcie0 {
 	ep-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>;
-	max-link-speed = <2>;
 	num-lanes = <4>;
 	pinctrl-0 = <&pcie_clkreqnb_cpm>;
 	pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
index c0074b3ed4af..01d1a75c8b4d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
@@ -329,7 +329,6 @@ &pcie_phy {
 
 &pcie0 {
 	ep-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
-	max-link-speed = <2>;
 	num-lanes = <4>;
 	pinctrl-0 = <&pcie_clkreqnb_cpm>;
 	pinctrl-names = "default";
-- 
2.30.2