[PATCH RFC 04/11] phy/rockchip: add Innosilicon-based CSI dphy
Helen Koike
helen.koike at collabora.com
Mon Jan 18 13:05:11 EST 2021
Hello,
Just some nit comments from a quick look, that you would probably
catch those when removing the RFC tag, but since I spotted them, here
they are:
On 1/8/21 4:33 PM, Heiko Stuebner wrote:
> From: Heiko Stuebner <heiko.stuebner at theobroma-systems.com>
>
> The CSI dphy found for example on the rk3326/px30 and rk3368 is based
> on an IP design from Innosilicon. Add a driver for it.
>
> Signed-off-by: Heiko Stuebner <heiko.stuebner at theobroma-systems.com>
> ---
> drivers/phy/rockchip/Kconfig | 9 +
> drivers/phy/rockchip/Makefile | 1 +
> .../phy/rockchip/phy-rockchip-inno-csidphy.c | 580 ++++++++++++++++++
> 3 files changed, 590 insertions(+)
> create mode 100644 drivers/phy/rockchip/phy-rockchip-inno-csidphy.c
>
> diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig
> index 159285f42e5c..e812adad7242 100644
> --- a/drivers/phy/rockchip/Kconfig
> +++ b/drivers/phy/rockchip/Kconfig
> @@ -48,6 +48,15 @@ config PHY_ROCKCHIP_INNO_USB2
> help
> Support for Rockchip USB2.0 PHY with Innosilicon IP block.
>
> +config PHY_ROCKCHIP_INNO_CSIDPHY
> + tristate "Rockchip Innosilicon MIPI CSI PHY driver"
> + depends on (ARCH_ROCKCHIP || COMPILE_TEST) && OF
> + select GENERIC_PHY
> + select GENERIC_PHY_MIPI_DPHY
> + help
> + Enable this to support the Rockchip MIPI CSI PHY with
> + Innosilicon IP block.
> +
> config PHY_ROCKCHIP_INNO_DSIDPHY
> tristate "Rockchip Innosilicon MIPI/LVDS/TTL PHY driver"
> depends on (ARCH_ROCKCHIP || COMPILE_TEST) && OF
> diff --git a/drivers/phy/rockchip/Makefile b/drivers/phy/rockchip/Makefile
> index c3cfc7f0af5c..f0eec212b2aa 100644
> --- a/drivers/phy/rockchip/Makefile
> +++ b/drivers/phy/rockchip/Makefile
> @@ -2,6 +2,7 @@
> obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o
> obj-$(CONFIG_PHY_ROCKCHIP_DPHY_RX0) += phy-rockchip-dphy-rx0.o
> obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o
> +obj-$(CONFIG_PHY_ROCKCHIP_INNO_CSIDPHY) += phy-rockchip-inno-csidphy.o
> obj-$(CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY) += phy-rockchip-inno-dsidphy.o
> obj-$(CONFIG_PHY_ROCKCHIP_INNO_HDMI) += phy-rockchip-inno-hdmi.o
> obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2) += phy-rockchip-inno-usb2.o
> diff --git a/drivers/phy/rockchip/phy-rockchip-inno-csidphy.c b/drivers/phy/rockchip/phy-rockchip-inno-csidphy.c
> new file mode 100644
> index 000000000000..96a7fe137bb9
> --- /dev/null
> +++ b/drivers/phy/rockchip/phy-rockchip-inno-csidphy.c
> @@ -0,0 +1,580 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Rockchip MIPI RX Innosilicon DPHY driver
> + *
> + * Copyright (C) 2017 Fuzhou Rockchip Electronics Co., Ltd.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset.h>
> +#include <linux/phy/phy.h>
Alphabetical order
> +#include <linux/phy/phy-mipi-dphy.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/regmap.h>
> +#include <linux/mfd/syscon.h>
> +
> +/* GRF */
> +#define RK1808_GRF_PD_VI_CON_OFFSET 0x0430
> +
> +#define RK3326_GRF_IO_VSEL_OFFSET 0x0180
> +#define RK3326_GRF_PD_VI_CON_OFFSET 0x0430
> +
> +#define RK3368_GRF_SOC_CON6_OFFSET 0x0418
> +#define RK3368_GRF_IO_VSEL_OFFSET 0x0900
Some of those are "used" in commented lines.
> +
> +/* PHY */
> +#define CLOCK_LANE_HS_RX_CONTROL 0x34
> +#define LANE0_HS_RX_CONTROL 0x44
> +#define LANE1_HS_RX_CONTROL 0x54
> +#define LANE2_HS_RX_CONTROL 0x84
> +#define LANE3_HS_RX_CONTROL 0x94
> +#define HS_RX_DATA_LANES_THS_SETTLE_CONTROL 0x75
These defines are not used, should them be removed?
> +
> +#define CSIDPHY_CTRL_LANE_ENABLE 0x00
> +#define CSIDPHY_CTRL_LANE_ENABLE_CK BIT(6)
> +#define CSIDPHY_CTRL_LANE_ENABLE_LANE3 BIT(5)
> +#define CSIDPHY_CTRL_LANE_ENABLE_LANE2 BIT(4)
> +#define CSIDPHY_CTRL_LANE_ENABLE_LANE1 BIT(3)> +#define CSIDPHY_CTRL_LANE_ENABLE_LANE0 BIT(2)
same for *_LANEx macros.
> +#define CSIDPHY_CTRL_LANE_ENABLE_UNDEFINED BIT(0)
> +
> +#define CSIDPHY_CTRL_LANE_ENABLE_SHIFT 2
> +
> +/* not present on all variants */
> +#define CSIDPHY_CTRL_PWRCTL 0x04
> +#define CSIDPHY_CTRL_PWRCTL_UNDEFINED GENMASK(7, 5)
> +#define CSIDPHY_CTRL_PWRCTL_SYNCRST BIT(2)
> +#define CSIDPHY_CTRL_PWRCTL_LDO_PD BIT(1)
> +#define CSIDPHY_CTRL_PWRCTL_PLL_PD BIT(0)
> +
> +#define CSIDPHY_CTRL_DIG_RST 0x80
> +#define CSIDPHY_CTRL_DIG_RST_UNDEFINED 0x1e
> +#define CSIDPHY_CTRL_DIG_RST_RESET BIT(0)
> +
> +
> +
> +
Too many new lines.
> +/* offset after CLK_THS_SETTLE */
> +#define CSIDPHY_CLK_THS_SETTLE 0
> +#define CSIDPHY_LANE_THS_SETTLE(n) ((n + 1) * 0x80)
> +#define CSIDPHY_THS_SETTLE_MASK 0x7f
> +
> +/* Configure the count time of the THS-SETTLE by protocol. */
> +#define RK1808_CSIDPHY_CLK_WR_THS_SETTLE 0x160
> +#define RK3326_CSIDPHY_CLK_WR_THS_SETTLE 0x100
> +#define RK3368_CSIDPHY_CLK_WR_THS_SETTLE 0x100
> +
> +
> +#define RK1808_CSI_DPHY_LANE0_WR_THS_SETTLE \
> + (RK1808_CSI_DPHY_CLK_WR_THS_SETTLE + 0x80)
> +#define RK1808_CSI_DPHY_LANE1_WR_THS_SETTLE \
> + (RK1808_CSI_DPHY_LANE0_WR_THS_SETTLE + 0x80)
> +#define RK1808_CSI_DPHY_LANE2_WR_THS_SETTLE \
> + (RK1808_CSI_DPHY_LANE1_WR_THS_SETTLE + 0x80)
> +#define RK1808_CSI_DPHY_LANE3_WR_THS_SETTLE \
> + (RK1808_CSI_DPHY_LANE2_WR_THS_SETTLE + 0x80)
> +
> +#define RK3326_CSI_DPHY_LANE0_WR_THS_SETTLE \
> + (RK3326_CSI_DPHY_CLK_WR_THS_SETTLE + 0x80)
> +#define RK3326_CSI_DPHY_LANE1_WR_THS_SETTLE \
> + (RK3326_CSI_DPHY_LANE0_WR_THS_SETTLE + 0x80)
> +#define RK3326_CSI_DPHY_LANE2_WR_THS_SETTLE \
> + (RK3326_CSI_DPHY_LANE1_WR_THS_SETTLE + 0x80)
> +#define RK3326_CSI_DPHY_LANE3_WR_THS_SETTLE \
> + (RK3326_CSI_DPHY_LANE2_WR_THS_SETTLE + 0x80)
> +
> +#define RK3368_CSI_DPHY_LANE0_WR_THS_SETTLE \
> + (RK3368_CSI_DPHY_CLK_WR_THS_SETTLE + 0x80)
> +#define RK3368_CSI_DPHY_LANE1_WR_THS_SETTLE \
> + (RK3368_CSI_DPHY_LANE0_WR_THS_SETTLE + 0x80)
> +#define RK3368_CSI_DPHY_LANE2_WR_THS_SETTLE \
> + (RK3368_CSI_DPHY_LANE1_WR_THS_SETTLE + 0x80)
> +#define RK3368_CSI_DPHY_LANE3_WR_THS_SETTLE \
> + (RK3368_CSI_DPHY_LANE2_WR_THS_SETTLE + 0x80)
> +
> +/* Calibration reception enable */
> +#define RK1808_CSIDPHY_CLK_CALIB_EN 0x168
> +
> +#define RK1808_CSI_DPHY_LANE0_CALIB_EN 0x1e8
> +#define RK1808_CSI_DPHY_LANE1_CALIB_EN 0x268
> +#define RK1808_CSI_DPHY_LANE2_CALIB_EN 0x2e8
> +#define RK1808_CSI_DPHY_LANE3_CALIB_EN 0x368
> +
> +#define RK3326_CSI_DPHY_CLK_CALIB_EN \
> + MIPI_CSI_DPHY_CTRL_INVALID_OFFSET
> +#define RK3326_CSI_DPHY_LANE0_CALIB_EN \
> + MIPI_CSI_DPHY_CTRL_INVALID_OFFSET
> +#define RK3326_CSI_DPHY_LANE1_CALIB_EN \
> + MIPI_CSI_DPHY_CTRL_INVALID_OFFSET
> +#define RK3326_CSI_DPHY_LANE2_CALIB_EN \
> + MIPI_CSI_DPHY_CTRL_INVALID_OFFSET
> +#define RK3326_CSI_DPHY_LANE3_CALIB_EN \
> + MIPI_CSI_DPHY_CTRL_INVALID_OFFSET
> +
> +#define RK3368_CSI_DPHY_CLK_CALIB_EN \
> + MIPI_CSI_DPHY_CTRL_INVALID_OFFSET
> +#define RK3368_CSI_DPHY_LANE0_CALIB_EN \
> + MIPI_CSI_DPHY_CTRL_INVALID_OFFSET
> +#define RK3368_CSI_DPHY_LANE1_CALIB_EN \
> + MIPI_CSI_DPHY_CTRL_INVALID_OFFSET
> +#define RK3368_CSI_DPHY_LANE2_CALIB_EN \
> + MIPI_CSI_DPHY_CTRL_INVALID_OFFSET
> +#define RK3368_CSI_DPHY_LANE3_CALIB_EN \
> + MIPI_CSI_DPHY_CTRL_INVALID_OFFSET
> +
> +#define HIWORD_UPDATE(val, mask, shift) \
> + ((val) << (shift) | (mask) << ((shift) + 16))
> +
> +enum dphy_reg_id {
> + GRF_DPHY_RX0_TURNDISABLE = 0,
> + GRF_DPHY_RX0_FORCERXMODE,
> + GRF_DPHY_RX0_FORCETXSTOPMODE,
> + GRF_DPHY_RX0_ENABLE,
> + GRF_DPHY_RX0_TURNREQUEST,
> + GRF_DPHY_TX0_TURNDISABLE,
> + GRF_DPHY_TX0_FORCERXMODE,
> + GRF_DPHY_TX0_FORCETXSTOPMODE,
> + GRF_DPHY_TX0_TURNREQUEST,
> + GRF_DPHY_RX1_SRC_SEL,
> +// GRF_DVP_V18SEL,
> + /* rk1808 & rk3326 */
> + GRF_DPHY_CSIPHY_FORCERXMODE,
> + GRF_DPHY_CSIPHY_CLKLANE_EN,
> + GRF_DPHY_CSIPHY_DATALANE_EN,
> + /* rk3368 only */
> + GRF_ISP_MIPI_CSI_HOST_SEL,
> +};
> +
> +struct dphy_reg {
> + u32 offset;
> + u32 mask;
> + u32 shift;
> +};
> +
> +#define PHY_REG(_offset, _width, _shift) \
> + { .offset = _offset, .mask = BIT(_width) - 1, .shift = _shift, }
> +
> +static const struct dphy_reg rk1808_grf_dphy_regs[] = {
> + [GRF_DPHY_CSIPHY_FORCERXMODE] = PHY_REG(RK1808_GRF_PD_VI_CON_OFFSET, 4, 0),
> + [GRF_DPHY_CSIPHY_CLKLANE_EN] = PHY_REG(RK1808_GRF_PD_VI_CON_OFFSET, 1, 8),
> + [GRF_DPHY_CSIPHY_DATALANE_EN] = PHY_REG(RK1808_GRF_PD_VI_CON_OFFSET, 4, 4),
> +};
> +
> +static const struct dphy_reg rk3326_grf_dphy_regs[] = {
> +// [GRF_DVP_V18SEL] = PHY_REG(RK3326_GRF_IO_VSEL_OFFSET, 1, 4),
Should this commented line be removed?
> + [GRF_DPHY_CSIPHY_FORCERXMODE] = PHY_REG(RK3326_GRF_PD_VI_CON_OFFSET, 4, 0),
> + [GRF_DPHY_CSIPHY_CLKLANE_EN] = PHY_REG(RK3326_GRF_PD_VI_CON_OFFSET, 1, 8),
> + [GRF_DPHY_CSIPHY_DATALANE_EN] = PHY_REG(RK3326_GRF_PD_VI_CON_OFFSET, 4, 4),
> +};
> +
> +static const struct dphy_reg rk3368_grf_dphy_regs[] = {
> +// [GRF_DVP_V18SEL] = PHY_REG(RK3368_GRF_IO_VSEL_OFFSET, 1, 1),
Ditto.
> + [GRF_DPHY_CSIPHY_FORCERXMODE] = PHY_REG(RK3368_GRF_SOC_CON6_OFFSET, 4, 8),
> + [GRF_ISP_MIPI_CSI_HOST_SEL] = PHY_REG(RK3368_GRF_SOC_CON6_OFFSET, 1, 1),
> +// [GRF_CON_DISABLE_ISP] = PHY_REG(RK3368_GRF_SOC_CON6_OFFSET, 1, 0),
Ditto.
> +};
> +
> +struct hsfreq_range {
> + u32 range_h;
> + u8 cfg_bit;
> +};
> +
> +struct rockchip_inno_csidphy;
> +
> +struct dphy_drv_data {
> + int pwrctl_offset;
> + int ths_settle_offset;
> + int calib_offset;
> + const struct hsfreq_range *hsfreq_ranges;
> + int num_hsfreq_ranges;
> + const struct dphy_reg *grf_regs;
> + void (*individual_init)(struct rockchip_inno_csidphy *priv);
> +};
> +
> +struct rockchip_inno_csidphy {
> + struct device *dev;
> + void __iomem *phy_base;
> + struct clk *pclk;
> + struct regmap *grf;
> + struct reset_control *rst;
> + const struct dphy_drv_data *drv_data;
> + struct phy_configure_opts_mipi_dphy config;
> + u8 hsfreq;
> +};
> +
> +static inline void write_grf_reg(struct rockchip_inno_csidphy *priv,
It seems it would be better to receive struct dphy_drv_data instead.
> + int index, u8 value)
> +{
> + struct dphy_drv_data *drv_data = priv->drv_data;
> + const struct dphy_reg *reg = &drv_data->grf_regs[index];
> + unsigned int val = HIWORD_UPDATE(value, reg->mask, reg->shift);
> +
> + if (reg->offset)
Is this check required?
> + regmap_write(priv->grf, reg->offset, val);
> +}
> +
> +static inline u32 read_grf_reg(struct rockchip_inno_csidphy *priv, int index)
This function seems to be unused.
> +{
> + struct dphy_drv_data *drv_data = priv->drv_data;
> + const struct dphy_reg *reg = &drv_data->grf_regs[index];
> + unsigned int val = 0;
> +
> + if (reg->offset) {
Is this check required?
> + regmap_read(priv->grf, reg->offset, &val);
> + val = (val >> reg->shift) & reg->mask;
> + }
> + return val;
> +}
> +
> +/* These tables must be sorted by .range_h ascending. */
> +static const struct hsfreq_range rk1808_mipidphy_hsfreq_ranges[] = {
> + { 109, 0x02}, { 149, 0x03}, { 199, 0x06}, { 249, 0x06},
> + { 299, 0x06}, { 399, 0x08}, { 499, 0x0b}, { 599, 0x0e},
> + { 699, 0x10}, { 799, 0x12}, { 999, 0x16}, {1199, 0x1e},
> + {1399, 0x23}, {1599, 0x2d}, {1799, 0x32}, {1999, 0x37},
> + {2199, 0x3c}, {2399, 0x41}, {2499, 0x46}
> +};
> +
> +static const struct hsfreq_range rk3326_mipidphy_hsfreq_ranges[] = {
> + { 109, 0x00}, { 149, 0x01}, { 199, 0x02}, { 249, 0x03},
> + { 299, 0x04}, { 399, 0x05}, { 499, 0x06}, { 599, 0x07},
> + { 699, 0x08}, { 799, 0x09}, { 899, 0x0a}, {1099, 0x0b},
> + {1249, 0x0c}, {1349, 0x0d}, {1500, 0x0e}
> +};
> +
> +static const struct hsfreq_range rk3368_mipidphy_hsfreq_ranges[] = {
> + { 109, 0x00}, { 149, 0x01}, { 199, 0x02}, { 249, 0x03},
> + { 299, 0x04}, { 399, 0x05}, { 499, 0x06}, { 599, 0x07},
> + { 699, 0x08}, { 799, 0x09}, { 899, 0x0a}, {1099, 0x0b},
> + {1249, 0x0c}, {1349, 0x0d}, {1500, 0x0e}
> +};
> +
> +static void default_mipidphy_individual_init(struct rockchip_inno_csidphy *priv)
> +{
> +}
> +
> +static void rk3368_mipidphy_individual_init(struct rockchip_inno_csidphy *priv)
> +{
> + /* isp select */
> + write_grf_reg(priv, GRF_ISP_MIPI_CSI_HOST_SEL, 1);
> +}
> +
> +static void rockchip_inno_csidphy_ths_settle(struct rockchip_inno_csidphy *priv,
> + int hsfreq, int offset)
> +{
> + struct dphy_drv_data *drv_data = priv->drv_data;
> + u32 val;
> +
> + val = readl(priv->phy_base + drv_data->ths_settle_offset + offset);
> + val &= ~CSIDPHY_THS_SETTLE_MASK;
> + val |= hsfreq;
> + writel(val, priv->phy_base + drv_data->ths_settle_offset + offset);
> +}
> +
> +static int rockchip_inno_csidphy_configure(struct phy *phy,
> + union phy_configure_opts *opts)
> +{
> + struct rockchip_inno_csidphy *priv = phy_get_drvdata(phy);
> + struct dphy_drv_data *drv_data = priv->drv_data;
> + struct phy_configure_opts_mipi_dphy *config = &opts->mipi_dphy;
> + unsigned int hsfreq = 0;
> + unsigned int i;
> + u64 data_rate_mbps;
> + int ret;
> +
> + /* pass with phy_mipi_dphy_get_default_config (with pixel rate?) */
> + ret = phy_mipi_dphy_config_validate(config);
> + if (ret)
> + return ret;
> +
> + data_rate_mbps = div_u64(config->hs_clk_rate, 1000 * 1000);
> +
> + dev_dbg(priv->dev, "lanes %d - data_rate_mbps %llu\n",
> + config->lanes, data_rate_mbps);
> + for (i = 0; i < drv_data->num_hsfreq_ranges; i++) {
> + if (drv_data->hsfreq_ranges[i].range_h >= data_rate_mbps) {
> + hsfreq = drv_data->hsfreq_ranges[i].cfg_bit;
> + break;
> + }
> + }
> + if (!hsfreq)
> + return -EINVAL;
> +
> + priv->hsfreq = hsfreq;
> + priv->config = *config;
> + return 0;
> +}
> +
> +static int rockchip_inno_csidphy_power_on(struct phy *phy)
> +{
> + struct rockchip_inno_csidphy *priv = phy_get_drvdata(phy);
> + struct dphy_drv_data *drv_data = priv->drv_data;
> + u32 val = 0;
> + int ret, i;
> +
> + u64 data_rate_mbps;
> +
> + data_rate_mbps = div_u64(priv->config.hs_clk_rate, 1000 * 1000);
> +
> + ret = clk_enable(priv->pclk);
> + if (ret < 0)
> + return ret;
> +
> +// write_grf_reg(priv, GRF_DVP_V18SEL, 0x1);
> +
> + /* phy start */
> + if (drv_data->pwrctl_offset >= 0)
> + writel(CSIDPHY_CTRL_PWRCTL_UNDEFINED |
> + CSIDPHY_CTRL_PWRCTL_SYNCRST,
> + priv->phy_base + drv_data->pwrctl_offset);
> +
> + /* set data lane num and enable clock lane */
> + val = GENMASK(priv->config.lanes - 1, 0) << CSIDPHY_CTRL_LANE_ENABLE_SHIFT;
> + writel(val | CSIDPHY_CTRL_LANE_ENABLE_CK |
> + CSIDPHY_CTRL_LANE_ENABLE_UNDEFINED,
> + priv->phy_base + CSIDPHY_CTRL_LANE_ENABLE);
> +
> + /* Reset dphy analog part */
> + if (drv_data->pwrctl_offset >= 0)
> + writel(CSIDPHY_CTRL_PWRCTL_UNDEFINED,
> + priv->phy_base + drv_data->pwrctl_offset);
> + usleep_range(500, 1000);
> +
> +
double new line.
> + /* Reset dphy digital part */
> + writel(CSIDPHY_CTRL_DIG_RST_UNDEFINED,
> + priv->phy_base + CSIDPHY_CTRL_DIG_RST);
> + writel(CSIDPHY_CTRL_DIG_RST_UNDEFINED + CSIDPHY_CTRL_DIG_RST_RESET,
> + priv->phy_base + CSIDPHY_CTRL_DIG_RST);
> +
> + /* not into receive mode/wait stopstate */
> + write_grf_reg(priv, GRF_DPHY_CSIPHY_FORCERXMODE, 0x0);
> +
> + /* enable calibration */
> +/* FIXME: reenable
> + if (data_rate_mbps > 1500) {
> + write_csiphy_reg(priv, CSIPHY_CLK_CALIB_ENABLE, 0x80);
> + if (priv->config.lanes > 0)
> + write_csiphy_reg(priv, CSIPHY_LANE0_CALIB_ENABLE, 0x80);
> + if (priv->config.lanes > 1)
> + write_csiphy_reg(priv, CSIPHY_LANE1_CALIB_ENABLE, 0x80);
> + if (priv->config.lanes > 2)
> + write_csiphy_reg(priv, CSIPHY_LANE2_CALIB_ENABLE, 0x80);
> + if (priv->config.lanes > 3)
> + write_csiphy_reg(priv, CSIPHY_LANE3_CALIB_ENABLE, 0x80);
> + } */
maybe fix identation and add an explanation explaning why this is commented?
#if 0 ?
> +
> + rockchip_inno_csidphy_ths_settle(priv, priv->hsfreq,
> + CSIDPHY_CLK_THS_SETTLE);
> + for (i = 0; i < priv->config.lanes; i++)
> + rockchip_inno_csidphy_ths_settle(priv, priv->hsfreq,
> + CSIDPHY_LANE_THS_SETTLE(i));
> +
> +// write_grf_reg(priv, GRF_DPHY_CLK_INV_SEL, 0x1);
commented code line.
> + write_grf_reg(priv, GRF_DPHY_CSIPHY_CLKLANE_EN, 0x1);
> + write_grf_reg(priv, GRF_DPHY_CSIPHY_DATALANE_EN,
> + GENMASK(priv->config.lanes - 1, 0));
> +
> + return 0;
> +}
> +
> +static int rockchip_inno_csidphy_power_off(struct phy *phy)
> +{
> + struct rockchip_inno_csidphy *priv = phy_get_drvdata(phy);
> + struct dphy_drv_data *drv_data = priv->drv_data;
> +
> + /* disable all lanes */
> + writel(CSIDPHY_CTRL_LANE_ENABLE_UNDEFINED,
> + priv->phy_base + CSIDPHY_CTRL_LANE_ENABLE);
> +
> + /* disable pll and ldo */
> + if (drv_data->pwrctl_offset >= 0)
> + writel(CSIDPHY_CTRL_PWRCTL_UNDEFINED |
> + CSIDPHY_CTRL_PWRCTL_LDO_PD |
> + CSIDPHY_CTRL_PWRCTL_PLL_PD,
> + priv->phy_base + drv_data->pwrctl_offset);
> + usleep_range(500, 1000);
> +
> + clk_disable(priv->pclk);
> +
> + return 0;
> +}
> +
> +static int rockchip_inno_csidphy_init(struct phy *phy)
> +{
> + struct rockchip_inno_csidphy *priv = phy_get_drvdata(phy);
> +
> + return clk_prepare(priv->pclk);
> +}
> +
> +static int rockchip_inno_csidphy_exit(struct phy *phy)
> +{
> + struct rockchip_inno_csidphy *priv = phy_get_drvdata(phy);
> +
> + clk_unprepare(priv->pclk);
> +
> + return 0;
> +}
> +
> +static const struct phy_ops rockchip_inno_csidphy_ops = {
> + .power_on = rockchip_inno_csidphy_power_on,
> + .power_off = rockchip_inno_csidphy_power_off,
> + .init = rockchip_inno_csidphy_init,
> + .exit = rockchip_inno_csidphy_exit,
> + .configure = rockchip_inno_csidphy_configure,
> + .owner = THIS_MODULE,
> +};
> +
> +
> +static const struct dphy_drv_data rk1808_mipidphy_drv_data = {
> + .pwrctl_offset = -1,
> + .ths_settle_offset = RK1808_CSIDPHY_CLK_WR_THS_SETTLE,
> + .calib_offset = RK1808_CSIDPHY_CLK_CALIB_EN,
> + .hsfreq_ranges = rk1808_mipidphy_hsfreq_ranges,
> + .num_hsfreq_ranges = ARRAY_SIZE(rk1808_mipidphy_hsfreq_ranges),
> + .grf_regs = rk1808_grf_dphy_regs,
> +
> + .individual_init = default_mipidphy_individual_init,
> +};
> +
> +static const struct dphy_drv_data rk3326_mipidphy_drv_data = {
> + .pwrctl_offset = CSIDPHY_CTRL_PWRCTL,
> + .ths_settle_offset = RK3326_CSIDPHY_CLK_WR_THS_SETTLE,
> + .calib_offset = -1,
> + .hsfreq_ranges = rk3326_mipidphy_hsfreq_ranges,
> + .num_hsfreq_ranges = ARRAY_SIZE(rk3326_mipidphy_hsfreq_ranges),
> + .grf_regs = rk3326_grf_dphy_regs,
> +
> + .individual_init = default_mipidphy_individual_init,
> +};
> +
> +static const struct dphy_drv_data rk3368_mipidphy_drv_data = {
> + .pwrctl_offset = CSIDPHY_CTRL_PWRCTL,
> + .ths_settle_offset = RK3368_CSIDPHY_CLK_WR_THS_SETTLE,
> + .calib_offset = -1,
> + .hsfreq_ranges = rk3368_mipidphy_hsfreq_ranges,
> + .num_hsfreq_ranges = ARRAY_SIZE(rk3368_mipidphy_hsfreq_ranges),
> + .grf_regs = rk3368_grf_dphy_regs,
> +
> + .individual_init = rk3368_mipidphy_individual_init,
> +};
> +
> +static const struct of_device_id rockchip_inno_csidphy_match_id[] = {
> + {
> + .compatible = "rockchip,px30-mipi-dphy",
> + .data = &rk3326_mipidphy_drv_data,
> + },
> + {
> + .compatible = "rockchip,rk1808-mipi-dphy-rx",
> + .data = &rk1808_mipidphy_drv_data,
> + },
> + {
> + .compatible = "rockchip,rk3326-mipi-dphy",
> + .data = &rk3326_mipidphy_drv_data,
> + },
> + {
> + .compatible = "rockchip,rk3368-mipi-dphy",
> + .data = &rk3368_mipidphy_drv_data,
> + },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, rockchip_inno_csidphy_match_id);
> +
> +
> +static int rockchip_inno_csidphy_probe(struct platform_device *pdev)
> +{
> + struct rockchip_inno_csidphy *priv;
> + struct device *dev = &pdev->dev;
> + struct regmap *grf;
> + struct phy_provider *phy_provider;
> + struct phy *phy;
> + int i, ret;
unused i.
> +
> + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + priv->dev = dev;
> + platform_set_drvdata(pdev, priv);
> +
> + priv->phy_base = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(priv->phy_base))
> + return PTR_ERR(priv->phy_base);
> +
> + priv->pclk = devm_clk_get(dev, "pclk");
> + if (IS_ERR(priv->pclk)) {
> + ret = PTR_ERR(priv->pclk);
> + dev_err(dev, "failed to get pclk: %d\n", ret);
> + return ret;
Maybe just:
dev_err(dev, "failed to get pclk: %d\n", ret);
return PTR_ERR(priv->pclk);
> + }
> +
> + priv->rst = devm_reset_control_get(dev, "apb");
> + if (IS_ERR(priv->rst)) {
> + ret = PTR_ERR(priv->rst);
> + dev_err(dev, "failed to get system reset control: %d\n", ret);
> + return ret;
Ditto.
> + }
> +
> + priv->grf = syscon_regmap_lookup_by_phandle(dev->of_node,
> + "rockchip,grf");
> + if (IS_ERR(priv->grf)) {
> + dev_err(dev, "Can't find GRF syscon\n");
> + return PTR_ERR(priv->grf);
> + }
> +
> + priv->drv_data = of_device_get_match_data(dev);
> + if (!priv->drv_data) {
> + dev_err(dev, "Can't find device data\n");
> + return -ENODEV;
> + }
> +
> + phy = devm_phy_create(dev, NULL, &rockchip_inno_csidphy_ops);
> + if (IS_ERR(phy)) {
> + ret = PTR_ERR(phy);
> + dev_err(dev, "failed to create phy: %d\n", ret);
> + return ret;
Ditto.
> + }
> +
> + phy_set_drvdata(phy, priv);
> +
> + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> + if (IS_ERR(phy_provider)) {
> + ret = PTR_ERR(phy_provider);
> + dev_err(dev, "failed to register phy provider: %d\n", ret);
> + return ret;
Ditto.
> + }
> +
> + pm_runtime_enable(dev);
> +
> + priv->drv_data->individual_init(priv);
> + return 0;
> +}
> +
> +static int rockchip_inno_csidphy_remove(struct platform_device *pdev)
> +{
> + struct rockchip_inno_csidphy *priv = platform_get_drvdata(pdev);
> +
> + pm_runtime_disable(priv->dev);
> +
> + return 0;
> +}
> +
> +static struct platform_driver rockchip_inno_csidphy_driver = {
> + .driver = {
> + .name = "rockchip-inno-csidphy",
> + .of_match_table = rockchip_inno_csidphy_match_id,
> + },
> + .probe = rockchip_inno_csidphy_probe,
> + .remove = rockchip_inno_csidphy_remove,
> +};
> +
> +module_platform_driver(rockchip_inno_csidphy_driver);
> +MODULE_AUTHOR("Rockchip Camera/ISP team");
> +MODULE_DESCRIPTION("Rockchip MIPI RX DPHY driver");
Just to follow the model of phy-rockchip-dphy-rx0.c, maybe
"Rockchip MIPI Innosilicon RX DPHY driver"
Regards,
Helen
> +MODULE_LICENSE("Dual BSD/GPL");
>
More information about the Linux-rockchip
mailing list