[PATCH v2 0/6] Support second Image Signal Processor on rk3399

Heiko Stübner heiko at sntech.de
Wed Feb 10 06:11:29 EST 2021


Am Mittwoch, 10. Februar 2021, 12:10:14 CET schrieb Heiko Stuebner:
> The rk3399 has two ISPs and right now only the first one is usable.
> The second ISP is connected to the TXRX dphy on the soc.
> 
> The phy of ISP1 is only accessible through the DSI controller's
> io-memory, so this series adds support for simply using the dsi
> controller is a phy if needed.
> 
> That solution is needed at least on rk3399 and rk3288 but no-one
> has looked at camera support on rk3288 at all, so right now
> only implement the rk3399 specifics.
> 
> changes in v2:
> - enable grf-clock also for init callback
>   to not break if for example hdmi is connected on boot
>   and disabled the grf clock during its probe
> - add Sebastian's Tested-by
> - add Rob's Ack for the phy-cells property
> 
> Heiko Stuebner (6):
>   drm/rockchip: dsi: add own additional pclk handling
>   dt-bindings: display: rockchip-dsi: add optional #phy-cells property
>   drm/rockchip: dsi: add ability to work as a phy instead of full dsi
>   arm64: dts: rockchip: add #phy-cells to mipi-dsi1
>   arm64: dts: rockchip: add cif clk-control pinctrl for rk3399
>   arm64: dts: rockchip: add isp1 node on rk3399

of course everything was meant to be v2 in the subject.


Heiko





More information about the Linux-rockchip mailing list