[PATCH v2 2/2] dt-bindings: convert Rockchip DW MIPI DSI binding to YAML format
David Heidelberg
david at ixit.cz
Sat Dec 11 15:38:18 PST 2021
Convert into YAML format into format, which can be validated.
Changes:
- drop panel from example
Signed-off-by: David Heidelberg <david at ixit.cz>
---
v2:
- rename patch
- drop possibility for only one compatible string
- add patch for adding compatible to the PX30 dtsi
.../display/rockchip/dw_mipi_dsi_rockchip.txt | 93 ---------
.../rockchip/rockchip,dw-mipi-dsi.yaml | 194 ++++++++++++++++++
2 files changed, 194 insertions(+), 93 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml
diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
deleted file mode 100644
index 39792f051d2d..000000000000
--- a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
+++ /dev/null
@@ -1,93 +0,0 @@
-Rockchip specific extensions to the Synopsys Designware MIPI DSI
-================================
-
-Required properties:
-- #address-cells: Should be <1>.
-- #size-cells: Should be <0>.
-- compatible: one of
- "rockchip,px30-mipi-dsi", "snps,dw-mipi-dsi"
- "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi"
- "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi"
-- reg: Represent the physical address range of the controller.
-- interrupts: Represent the controller's interrupt to the CPU(s).
-- clocks, clock-names: Phandles to the controller's pll reference
- clock(ref) when using an internal dphy and APB clock(pclk).
- For RK3399, a phy config clock (phy_cfg) and a grf clock(grf)
- are required. As described in [1].
-- rockchip,grf: this soc should set GRF regs to mux vopl/vopb.
-- ports: contain a port node with endpoint definitions as defined in [2].
- For vopb,set the reg = <0> and set the reg = <1> for vopl.
-- video port 0 for the VOP input, the remote endpoint maybe vopb or vopl
-- video port 1 for either a panel or subsequent encoder
-
-Optional properties:
-- phys: from general PHY binding: the phandle for the PHY device.
-- phy-names: Should be "dphy" if phys references an external phy.
-- #phy-cells: Defined when used as ISP phy, should be 0.
-- power-domains: a phandle to mipi dsi power domain node.
-- resets: list of phandle + reset specifier pairs, as described in [3].
-- reset-names: string reset name, must be "apb".
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/media/video-interfaces.txt
-[3] Documentation/devicetree/bindings/reset/reset.txt
-
-Example:
- mipi_dsi: mipi at ff960000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
- reg = <0xff960000 0x4000>;
- interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru SCLK_MIPI_24M>, <&cru PCLK_MIPI_DSI0>;
- clock-names = "ref", "pclk";
- resets = <&cru SRST_MIPIDSI0>;
- reset-names = "apb";
- rockchip,grf = <&grf>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- mipi_in: port at 0 {
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- mipi_in_vopb: endpoint at 0 {
- reg = <0>;
- remote-endpoint = <&vopb_out_mipi>;
- };
- mipi_in_vopl: endpoint at 1 {
- reg = <1>;
- remote-endpoint = <&vopl_out_mipi>;
- };
- };
-
- mipi_out: port at 1 {
- reg = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- mipi_out_panel: endpoint {
- remote-endpoint = <&panel_in_mipi>;
- };
- };
- };
-
- panel {
- compatible ="boe,tv080wum-nl0";
- reg = <0>;
-
- enable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&lcd_en>;
- backlight = <&backlight>;
-
- port {
- panel_in_mipi: endpoint {
- remote-endpoint = <&mipi_out_panel>;
- };
- };
- };
- };
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml
new file mode 100644
index 000000000000..9165c578d721
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml
@@ -0,0 +1,194 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip,dw-mipi-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip specific extensions to the Synopsys Designware MIPI DSI
+
+maintainers:
+ - opensource at rock-chips.com
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,px30-mipi-dsi
+ then:
+ properties:
+ clocks:
+ maxItems: 1
+ clock-names:
+ items:
+ - const: pclk
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk3288-mipi-dsi
+ then:
+ properties:
+ clocks:
+ maxItems: 2
+ clock-names:
+ items:
+ - const: ref
+ - const: pclk
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk3399-mipi-dsi
+ then:
+ properties:
+ clocks:
+ minItems: 4
+ maxItems: 4
+ clock-names:
+ items:
+ - const: ref
+ - const: pclk
+ - const: phy_cfg
+ - const: grf
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - rockchip,px30-mipi-dsi
+ - rockchip,rk3288-mipi-dsi
+ - rockchip,rk3399-mipi-dsi
+ - const: snps,dw-mipi-dsi
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks: true
+
+ clock-names: true
+
+ phys:
+ maxItems: 1
+ description: Optional external PHY
+
+ phy-names:
+ const: dphy
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port at 0:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: >
+ Video port for the VOP input.
+
+ properties:
+ endpoint at 0:
+ $ref: /schemas/graph.yaml#/properties/endpoint
+ description: Connection to the VOPB
+
+ endpoint at 1:
+ $ref: /schemas/graph.yaml#/properties/endpoint
+ description: Connection to the VOPL
+
+ required:
+ - endpoint at 0
+
+ port at 1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: >
+ Video port for panel or subsequent encoder
+
+ required:
+ - port at 0
+ - port at 1
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ items:
+ - const: apb
+
+ rockchip,grf:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ phandle to the GRF to mux vopl/vopb
+
+ power-domains: true
+
+ '#address-cells':
+ const: 1
+
+ '#phy-cells':
+ const: 0
+
+ '#size-cells':
+ const: 0
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - rockchip,grf
+ - ports
+ - '#address-cells'
+ - '#size-cells'
+
+additionalProperties: true
+
+examples:
+ - |
+ #include <dt-bindings/clock/rk3288-cru.h>
+
+ mipi_dsi: mipi at ff960000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
+ reg = <0xff960000 0x4000>;
+ interrupts = <0 83 4>;
+ clocks = <&cru 148>, <&cru PCLK_MIPI_DSI0>;
+ clock-names = "ref", "pclk";
+ resets = <&cru SRST_MIPIDSI0>;
+ reset-names = "apb";
+ rockchip,grf = <&grf>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mipi_in: port at 0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mipi_in_vopb: endpoint at 0 {
+ reg = <0>;
+ remote-endpoint = <&vopb_out_mipi>;
+ };
+ mipi_in_vopl: endpoint at 1 {
+ reg = <1>;
+ remote-endpoint = <&vopl_out_mipi>;
+ };
+ };
+
+ mipi_out: port at 1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mipi_out_panel: endpoint {
+ remote-endpoint = <&panel_in_mipi>;
+ };
+ };
+ };
+ };
--
2.33.0
More information about the Linux-rockchip
mailing list