[RFC V3 0/2] arm64: imx8mm: Enable Hantro VPUs

[Tim Harvey]

On Thu, Dec 2, 2021 at 4:29 AM Adam Ford <aford173 at gmail.com> wrote:
>
> On Wed, Dec 1, 2021 at 10:17 PM Adam Ford <aford173 at gmail.com> wrote:
> >
> > The i.MX8M has two Hantro video decoders, called G1 and G2 which appear
> > to be related to the video decoders used on the i.MX8MQ, but because of
> > how the Mini handles the power domains, the VPU driver does not need to
> > handle all the functions, so a new compatible flag is required.
> >
> > V3 is rebased from git://linuxtv.org/hverkuil/media_tree.git for-v5.17c
> > This branch has support for VP9.
> >
> > I set cma=512M, but this may not be enough memory as some tests appeard to run out of memory
> >
> > V3 of this series has several changes:
> >
> > Update imx8m_vpu_hw to add missing 'reg' reference names for G2 and include references to VP9
> > Update device tree to remove IMX8MQ_VPU_RESET, remove some duplicate vpu clock parenting
> > Fix missing reg-names from vpu_g2 node.
> > Apply patch [1] to manage the power domains powering down.
> > [1] - https://lore.kernel.org/linux-arm-kernel/20211016210547.171717-1-marex@denx.de/t/
> >
> > With the above, the following Fluster scores are produced:
> >
> > G1:
> > ./fluster.py run -dGStreamer-H.264-V4L2SL-Gst1.0
> > Ran 90/135 tests successfully               in 74.406 secs
> >
> > ./fluster.py run -d GStreamer-VP8-V4L2SL-Gst1.0
> > Ran 55/61 tests successfully               in 8.080 secs
> >
> > G2:
> > ./fluster.py run -d GStreamer-VP9-V4L2SL-Gst1.0
> > Ran 127/303 tests successfully               in 203.873 secs
> >
> > Fluster and G-Streamer were both built from their respective git repos using their respective master/main branches.
> >
>
> I should note, that both interrupts appear to be triggering.
>
> # cat /proc/interrupts |grep codec
>  57:      13442          0          0          0     GICv3  39 Level
>   38300000.video-codec
>  58:       7815          0          0          0     GICv3  40 Level
>   38310000.video-codec
>

Adam,

On another thread you had let me know that you also removed the reset
from the pgc_vpumix power domain which does appear to resolve the
hang:

diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index eb9dcd9d1a31..31710af544dc 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -681,7 +681,6 @@
                                                clocks = <&clk
IMX8MM_CLK_VPU_DEC_ROOT>;
                                                assigned-clocks =
<&clk IMX8MM_CLK_VPU_BUS>;
                                                assigned-clock-parents
= <&clk IMX8MM_SYS_PLL1_800M>;
-                                               resets = <&src
IMX8MQ_RESET_VPU_RESET>;
                                        };

                                        pgc_vpu_g1: power-domain at 7 {

That would make such a patch have a 'Fixes commit d39d4bb15310
("arm64: dts: imx8mm: add GPC node")' but of course that vpu domain
isn't active until your series so I'm not sure if we should send this
separate or squash it with "arm64: dts: imx8mm: Enable VPU-G1 and
VPU-G2". I'm also not clear if removing the reset requires some
further discussion with Lucas.

Best regards,

Tim