[PATCH v2 3/3] soc: rockchip: io-domain: do more thing about regulator notify

[Jianqun Xu]

Do a fix to rockchip io-domain, follow this orders:

* system running state
  -> io-domain vsel to 3.3V
    -> regulator_enable
      -> vsel change according to regulator voltage

* system running state
  -> io-domain vsel to 3.3V
    -> regulator_disable

Found on some Rockchip SoCs, the regulator enable or disable without
care about the io-domain maybe caused soc damaged.

Signed-off-by: Jianqun Xu <jay.xu at rock-chips.com>
---
v2:
 - use "uV = regulator_get_voltage(supply->reg);" but from notify data
v1:
 - first version

 drivers/soc/rockchip/io-domain.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/soc/rockchip/io-domain.c b/drivers/soc/rockchip/io-domain.c
index cf8182fc3642..3c59077fafb1 100644
--- a/drivers/soc/rockchip/io-domain.c
+++ b/drivers/soc/rockchip/io-domain.c
@@ -123,6 +123,12 @@ static int rockchip_iodomain_notify(struct notifier_block *nb,
 	} else if (event & (REGULATOR_EVENT_VOLTAGE_CHANGE |
 			    REGULATOR_EVENT_ABORT_VOLTAGE_CHANGE)) {
 		uV = (unsigned long)data;
+	} else if (event & REGULATOR_EVENT_PRE_ENABLE) {
+		uV = MAX_VOLTAGE_3_3;
+	} else if (event & REGULATOR_EVENT_PRE_DISABLE) {
+		uV = MAX_VOLTAGE_3_3;
+	} else if (event & REGULATOR_EVENT_ENABLE) {
+		uV = regulator_get_voltage(supply->reg);
 	} else {
 		return NOTIFY_OK;
 	}
-- 
2.25.1