[PATCH 5/5] arm64: dts: rockchip: rk3568-evb1-v10: add node for sd card

[Michael Riesch]

Hi Heiko,

On 8/3/21 10:48 PM, Heiko Stübner wrote:
> Am Dienstag, 3. August 2021, 20:53:09 CEST schrieb Michael Riesch:
>> Signed-off-by: Michael Riesch <michael.riesch at wolfvision.net>
>> ---
>>  arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts | 15 +++++++++++++++
>>  1 file changed, 15 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
>> index 3ac70a8183c4..b0f5aa8c979c 100644
>> --- a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
>> +++ b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
>> @@ -17,6 +17,7 @@
>>  		ethernet0 = &gmac0;
>>  		ethernet1 = &gmac1;
>>  		emmc = &sdhci;
>> +		sd = &sdmmc0;
> 
> same thing as in the previous patch.
> 
> I guess you may want something like
> 
> 	mmc0 = &sdhci;
> 	mmc1 = &sdmmc0;
> 
> maybe?

Thanks for the suggestion, I'll include it in the v2.

Regards, Michael

> 
> 
> Heiko
> 
>>  	};
>>  
>>  	chosen: chosen {
>> @@ -353,6 +354,20 @@
>>  	status = "okay";
>>  };
>>  
>> +&sdmmc0 {
>> +	bus-width = <4>;
>> +	cap-sd-highspeed;
>> +	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
>> +	disable-wp;
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
>> +	sd-uhs-sdr104;
>> +	supports-sd;
>> +	vmmc-supply = <&vcc3v3_sd>;
>> +	vqmmc-supply = <&vccio_sd>;
>> +	status = "okay";
>> +};
>> +
>>  &uart2 {
>>  	status = "okay";
>>  };
>>
> 
> 
> 
>