[PATCH v4 07/10] dt-bindings: soc: rockchip: Convert grf.txt to YAML

[Rob Herring]

On Thu, Apr 29, 2021 at 04:13:21PM +0800, cl at rock-chips.com wrote:
> From: Liang Chen <cl at rock-chips.com>
> 
> Current dts files with 'grf' nodes are manually verified. In order to
> automate this process grf.txt has to be converted to YAML.
> 
> Add new descriptions for:
> "rockchip,rk3568-grf", "syscon", "simple-mfd"
> "rockchip,rk3568-pmugrf", "syscon", "simple-mfd"
> 
> Signed-off-by: Liang Chen <cl at rock-chips.com>
> ---
>  .../devicetree/bindings/soc/rockchip/grf.txt  | 61 -------------------
>  .../devicetree/bindings/soc/rockchip/grf.yaml | 60 ++++++++++++++++++
>  2 files changed, 60 insertions(+), 61 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/soc/rockchip/grf.txt
>  create mode 100644 Documentation/devicetree/bindings/soc/rockchip/grf.yaml
> 
> diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.txt b/Documentation/devicetree/bindings/soc/rockchip/grf.txt
> deleted file mode 100644
> index f96511aa3897..000000000000
> --- a/Documentation/devicetree/bindings/soc/rockchip/grf.txt
> +++ /dev/null
> @@ -1,61 +0,0 @@
> -* Rockchip General Register Files (GRF)
> -
> -The general register file will be used to do static set by software, which
> -is composed of many registers for system control.
> -
> -From RK3368 SoCs, the GRF is divided into two sections,
> -- GRF, used for general non-secure system,
> -- SGRF, used for general secure system,
> -- PMUGRF, used for always on system
> -
> -On RK3328 SoCs, the GRF adds a section for USB2PHYGRF,
> -
> -ON RK3308 SoC, the GRF is divided into four sections:
> -- GRF, used for general non-secure system,
> -- SGRF, used for general secure system,
> -- DETECTGRF, used for audio codec system,
> -- COREGRF, used for pvtm,
> -
> -Required Properties:
> -
> -- compatible: GRF should be one of the following:
> -   - "rockchip,px30-grf", "syscon": for px30
> -   - "rockchip,rk3036-grf", "syscon": for rk3036
> -   - "rockchip,rk3066-grf", "syscon": for rk3066
> -   - "rockchip,rk3188-grf", "syscon": for rk3188
> -   - "rockchip,rk3228-grf", "syscon": for rk3228
> -   - "rockchip,rk3288-grf", "syscon": for rk3288
> -   - "rockchip,rk3308-grf", "syscon": for rk3308
> -   - "rockchip,rk3328-grf", "syscon": for rk3328
> -   - "rockchip,rk3368-grf", "syscon": for rk3368
> -   - "rockchip,rk3399-grf", "syscon": for rk3399
> -   - "rockchip,rv1108-grf", "syscon": for rv1108
> -- compatible: DETECTGRF should be one of the following:
> -   - "rockchip,rk3308-detect-grf", "syscon": for rk3308
> -- compatilbe: COREGRF should be one of the following:
> -   - "rockchip,rk3308-core-grf", "syscon": for rk3308
> -- compatible: PMUGRF should be one of the following:
> -   - "rockchip,px30-pmugrf", "syscon": for px30
> -   - "rockchip,rk3368-pmugrf", "syscon": for rk3368
> -   - "rockchip,rk3399-pmugrf", "syscon": for rk3399
> -- compatible: SGRF should be one of the following:
> -   - "rockchip,rk3288-sgrf", "syscon": for rk3288
> -- compatible: USB2PHYGRF should be one of the following:
> -   - "rockchip,px30-usb2phy-grf", "syscon": for px30
> -   - "rockchip,rk3328-usb2phy-grf", "syscon": for rk3328
> -- compatible: USBGRF should be one of the following:
> -   - "rockchip,rv1108-usbgrf", "syscon": for rv1108
> -- reg: physical base address of the controller and length of memory mapped
> -  region.
> -
> -Example: GRF and PMUGRF of RK3399 SoCs
> -
> -	pmugrf: syscon at ff320000 {
> -		compatible = "rockchip,rk3399-pmugrf", "syscon";
> -		reg = <0x0 0xff320000 0x0 0x1000>;
> -	};
> -
> -	grf: syscon at ff770000 {
> -		compatible = "rockchip,rk3399-grf", "syscon";
> -		reg = <0x0 0xff770000 0x0 0x10000>;
> -	};
> diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
> new file mode 100644
> index 000000000000..93231b95554b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
> @@ -0,0 +1,60 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/soc/rockchip/grf.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Rockchip General Register Files
> +
> +maintainers:
> +  - Heiko Stuebner <heiko at sntech.de>
> +
> +properties:
> +  compatible:
> +    - items:

The '-' is the source of your error.

> +        - enum:
> +            - rockchip,px30-grf
> +            - rockchip,px30-pmugrf
> +            - rockchip,px30-usb2phy-grf
> +            - rockchip,rk3036-grf
> +            - rockchip,rk3066-grf
> +            - rockchip,rk3188-grf
> +            - rockchip,rk3228-grf
> +            - rockchip,rk3288-grf
> +            - rockchip,rk3288-sgrf
> +            - rockchip,rk3308-core-grf
> +            - rockchip,rk3308-detect-grf
> +            - rockchip,rk3308-grf
> +            - rockchip,rk3328-grf
> +            - rockchip,rk3328-usb2phy-grf
> +            - rockchip,rk3368-grf
> +            - rockchip,rk3368-pmugrf
> +            - rockchip,rk3399-grf
> +            - rockchip,rk3399-pmugrf
> +            - rockchip,rk3568-grf
> +            - rockchip,rk3568-pmugrf
> +            - rockchip,rv1108-grf
> +            - rockchip,rv1108-usbgrf
> +        - const: syscon
> +        - const: simple-mfd

'simple-mfd' was not in the old binding. That implies you have child 
nodes, and if so, they need to be documented. I imagine that will mean 
splitting this into multiple schemas if that's the case.

> +
> +  reg:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    pmugrf: syscon at ff320000 {
> +       compatible = "rockchip,rk3399-pmugrf", "syscon", "simple-mfd";
> +       reg = <0xff320000 0x1000>;
> +    };
> +
> +    grf: syscon at ff770000 {
> +       compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
> +       reg = <0xff770000 0x10000>;
> +    };
> -- 
> 2.17.1
> 
> 
>