[PATCH v3 09/10] arm64: dts: rockchip: add core dtsi for RK3568 SoC
Johan Jonker
jbx6244 at gmail.com
Wed Apr 28 19:25:17 BST 2021
Hi,
Question for rob+dt or others.
===
1: Given error:
/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dt.yaml: sram at 10f000:
sram at 0:compatible: None of ['arm,scmi-shmem'] are valid under the given
schema
From schema: /Documentation/devicetree/bindings/sram/sram.yaml
===
2: Given incorrect sram Example arm,scmi.txt that is in need to convert to
YAML:
sram at 50000000 {
compatible = "mmio-sram";
reg = <0x0 0x50000000 0x0 0x10000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x0 0x50000000 0x10000>;
cpu_scp_lpri: scp-shmem at 0 {
===
sram at 0
===
compatible = "arm,scmi-shmem";
reg = <0x0 0x200>;
};
cpu_scp_hpri: scp-shmem at 200 {
===
sram at 200
===
compatible = "arm,scmi-shmem";
reg = <0x200 0x200>;
};
};
===
Should "arm,scmi-shmem" also be added to sram.yaml ??
What to do with "arm,scmi.txt" then ??
patternProperties:
"^([a-z]*-)?sram(-section)?@[a-f0-9]+$":
type: object
description:
Each child of the sram node specifies a region of reserved memory.
properties:
compatible:
description:
Should contain a vendor specific string in the form
<vendor>,[<device>-]<usage>
contains:
enum:
- allwinner,sun4i-a10-sram-a3-a4
- allwinner,sun4i-a10-sram-c1
- allwinner,sun4i-a10-sram-d
- allwinner,sun9i-a80-smp-sram
- allwinner,sun50i-a64-sram-c
- amlogic,meson8-ao-arc-sram
- amlogic,meson8b-ao-arc-sram
- amlogic,meson8-smp-sram
- amlogic,meson8b-smp-sram
- amlogic,meson-gxbb-scp-shmem
- amlogic,meson-axg-scp-shmem
===
- arm,scmi-shmem
===
- renesas,smp-sram
- rockchip,rk3066-smp-sram
- samsung,exynos4210-sysram
- samsung,exynos4210-sysram-ns
- socionext,milbeaut-smp-sram
====
Given missing YAML documents for:
operating-points-v2
arm,pl330, arm,primecell
arm,scmi-smc
arm,scmi-shmem
rockchip,rk3568-pinctrl
For sort order and dtbs_check and for what's worth and fixed:
Reviewed-by: Johan Jonker <jbx6244 at gmail.com>
On 4/28/21 3:50 PM, cl at rock-chips.com wrote:
> From: Liang Chen <cl at rock-chips.com>
>
> RK3568 is a high-performance and low power quad-core application processor
> designed for personal mobile internet device and AIoT equipment. This patch
> add basic core dtsi file for it.
>
> We use scmi_clk for cortex-a55 instead of standard ARMCLK, so that
> kernel/uboot/rtos can change cpu clk with the same code in ATF, and we will
> enalbe a special high-performance PLL when high frequency is required. The
> smci_clk code is in ATF, and clkid for cpu is 0, as below:
>
> cpu0: cpu at 0 {
> device_type = "cpu";
> compatible = "arm,cortex-a55";
> reg = <0x0 0x0>;
> clocks = <&scmi_clk 0>;
> };
>
> Signed-off-by: Liang Chen <cl at rock-chips.com>
> ---
[..]
> diff --git a/arch/arm64/boot/dts/rockchip/rk3568.dtsi b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
> new file mode 100644
> index 000000000000..7983fa13d93f
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
> @@ -0,0 +1,779 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
> + */
> +
> +#include <dt-bindings/clock/rk3568-cru.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/phy/phy.h>
> +#include <dt-bindings/pinctrl/rockchip.h>
> +#include <dt-bindings/soc/rockchip,boot-mode.h>
> +#include <dt-bindings/thermal/thermal.h>
> +
> +/ {
> + compatible = "rockchip,rk3568";
> +
> + interrupt-parent = <&gic>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + aliases {
> + gpio0 = &gpio0;
> + gpio1 = &gpio1;
> + gpio2 = &gpio2;
> + gpio3 = &gpio3;
> + gpio4 = &gpio4;
> + i2c0 = &i2c0;
> + i2c1 = &i2c1;
> + i2c2 = &i2c2;
> + i2c3 = &i2c3;
> + i2c4 = &i2c4;
> + i2c5 = &i2c5;
> + serial0 = &uart0;
> + serial1 = &uart1;
> + serial2 = &uart2;
> + serial3 = &uart3;
> + serial4 = &uart4;
> + serial5 = &uart5;
> + serial6 = &uart6;
> + serial7 = &uart7;
> + serial8 = &uart8;
> + serial9 = &uart9;
> + };
> +
> + cpus {
> + #address-cells = <2>;
> + #size-cells = <0>;
> +
> + cpu0: cpu at 0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a55";
> + reg = <0x0 0x0>;
> + clocks = <&scmi_clk 0>;
> + enable-method = "psci";
> + operating-points-v2 = <&cpu0_opp_table>;
> + };
> +
> + cpu1: cpu at 100 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a55";
> + reg = <0x0 0x100>;
> + enable-method = "psci";
> + operating-points-v2 = <&cpu0_opp_table>;
> + };
> +
> + cpu2: cpu at 200 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a55";
> + reg = <0x0 0x200>;
> + enable-method = "psci";
> + operating-points-v2 = <&cpu0_opp_table>;
> + };
> +
> + cpu3: cpu at 300 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a55";
> + reg = <0x0 0x300>;
> + enable-method = "psci";
> + operating-points-v2 = <&cpu0_opp_table>;
> + };
> + };
> +
> + cpu0_opp_table: cpu0-opp-table {
> + compatible = "operating-points-v2";
> + opp-shared;
> +
> + opp-408000000 {
> + opp-hz = /bits/ 64 <408000000>;
> + opp-microvolt = <900000 900000 1150000>;
> + clock-latency-ns = <40000>;
> + };
> +
> + opp-600000000 {
> + opp-hz = /bits/ 64 <600000000>;
> + opp-microvolt = <900000 900000 1150000>;
> + };
> +
> + opp-816000000 {
> + opp-hz = /bits/ 64 <816000000>;
> + opp-microvolt = <900000 900000 1150000>;
> + opp-suspend;
> + };
> +
> + opp-1104000000 {
> + opp-hz = /bits/ 64 <1104000000>;
> + opp-microvolt = <900000 900000 1150000>;
> + };
> +
> + opp-1416000000 {
> + opp-hz = /bits/ 64 <1416000000>;
> + opp-microvolt = <900000 900000 1150000>;
> + };
> +
> + opp-1608000000 {
> + opp-hz = /bits/ 64 <1608000000>;
> + opp-microvolt = <975000 975000 1150000>;
> + };
> +
> + opp-1800000000 {
> + opp-hz = /bits/ 64 <1800000000>;
> + opp-microvolt = <1050000 1050000 1150000>;
> + };
> +
> + opp-1992000000 {
> + opp-hz = /bits/ 64 <1992000000>;
> + opp-microvolt = <1150000 1150000 1150000>;
> + };
> + };
> +
> + firmware {
> + scmi: scmi {
> + compatible = "arm,scmi-smc";
> + arm,smc-id = <0x82000010>;
> + shmem = <&scmi_shmem>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + scmi_clk: protocol at 14 {
> + reg = <0x14>;
> + #clock-cells = <1>;
> + };
> + };
> +
Remove empty line.
> + };
> +
> + pmu {
> + compatible = "arm,cortex-a55-pmu";
> + interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
> + };
> +
> + psci {
> + compatible = "arm,psci-1.0";
> + method = "smc";
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
> + arm,no-tick-in-suspend;
> + };
> +
> + xin24m: xin24m {
> + compatible = "fixed-clock";
> + clock-frequency = <24000000>;
> + clock-output-names = "xin24m";
> + #clock-cells = <0>;
> + };
> +
> + xin32k: xin32k {
> + compatible = "fixed-clock";
> + clock-frequency = <32768>;
> + clock-output-names = "xin32k";
> + pinctrl-0 = <&clk32k_out0>;
> + pinctrl-names = "default";
> + #clock-cells = <0>;
> + };
> +
> + sram at 10f000 {
> + compatible = "mmio-sram";
> + reg = <0x0 0x0010f000 0x0 0x100>;
> +
Remove empty line.
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0x0 0x0010f000 0x100>;
Is this correct ?
> +
> + scmi_shmem: sram at 0 {
> + compatible = "arm,scmi-shmem";
> + reg = <0x0 0x100>;
> + };
> + };
> +
> + gic: interrupt-controller at fd400000 {
> + compatible = "arm,gic-v3";
> + reg = <0x0 0xfd400000 0 0x10000>, /* GICD */
> + <0x0 0xfd460000 0 0xc0000>; /* GICR */
> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + mbi-alias = <0x0 0xfd400000>;
> + mbi-ranges = <296 24>;
> + msi-controller;
> + };
> +
> + pmugrf: syscon at fdc20000 {
> + compatible = "rockchip,rk3568-pmugrf", "syscon", "simple-mfd";
> + reg = <0x0 0xfdc20000 0x0 0x10000>;
> + };
> +
> + grf: syscon at fdc60000 {
> + compatible = "rockchip,rk3568-grf", "syscon", "simple-mfd";
> + reg = <0x0 0xfdc60000 0x0 0x10000>;
> + };
> +
> + pmucru: clock-controller at fdd00000 {
> + compatible = "rockchip,rk3568-pmucru";
> + reg = <0x0 0xfdd00000 0x0 0x1000>;
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + };
> +
> + cru: clock-controller at fdd20000 {
> + compatible = "rockchip,rk3568-cru";
> + reg = <0x0 0xfdd20000 0x0 0x1000>;
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + };
> +
> + i2c0: i2c at fdd40000 {
> + compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c";
> + reg = <0x0 0xfdd40000 0x0 0x1000>;
> + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&pmucru CLK_I2C0>, <&pmucru PCLK_I2C0>;
> + clock-names = "i2c", "pclk";
> + pinctrl-0 = <&i2c0_xfer>;
> + pinctrl-names = "default";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + uart0: serial at fdd50000 {
> + compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
> + reg = <0x0 0xfdd50000 0x0 0x100>;
> + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&pmucru SCLK_UART0>, <&pmucru PCLK_UART0>;
> + clock-names = "baudclk", "apb_pclk";
> + dmas = <&dmac0 0>, <&dmac0 1>;
> + pinctrl-0 = <&uart0_xfer>;
> + pinctrl-names = "default";
> + reg-io-width = <4>;
> + reg-shift = <2>;
> + status = "disabled";
> + };
> +
> + pwm0: pwm at fdd70000 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfdd70000 0x0 0x10>;
> + clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm0m0_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm1: pwm at fdd70010 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfdd70010 0x0 0x10>;
> + clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm1m0_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm2: pwm at fdd70020 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfdd70020 0x0 0x10>;
> + clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm2m0_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm3: pwm at fdd70030 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfdd70030 0x0 0x10>;
> + clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm3_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + sdmmc2: mmc at fe000000 {
> + compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc";
> + reg = <0x0 0xfe000000 0x0 0x4000>;
> + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru HCLK_SDMMC2>, <&cru CLK_SDMMC2>,
> + <&cru SCLK_SDMMC2_DRV>, <&cru SCLK_SDMMC2_SAMPLE>;
> + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
> + fifo-depth = <0x100>;
> + max-frequency = <150000000>;
> + resets = <&cru SRST_SDMMC2>;
> + reset-names = "reset";
> + status = "disabled";
> + };
> +
> + sdmmc0: mmc at fe2b0000 {
> + compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc";
> + reg = <0x0 0xfe2b0000 0x0 0x4000>;
> + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru HCLK_SDMMC0>, <&cru CLK_SDMMC0>,
> + <&cru SCLK_SDMMC0_DRV>, <&cru SCLK_SDMMC0_SAMPLE>;
> + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
> + fifo-depth = <0x100>;
> + max-frequency = <150000000>;
> + resets = <&cru SRST_SDMMC0>;
> + reset-names = "reset";
> + status = "disabled";
> + };
> +
> + sdmmc1: mmc at fe2c0000 {
> + compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc";
> + reg = <0x0 0xfe2c0000 0x0 0x4000>;
> + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru HCLK_SDMMC1>, <&cru CLK_SDMMC1>,
> + <&cru SCLK_SDMMC1_DRV>, <&cru SCLK_SDMMC1_SAMPLE>;
> + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
> + fifo-depth = <0x100>;
> + max-frequency = <150000000>;
> + resets = <&cru SRST_SDMMC1>;
> + reset-names = "reset";
> + status = "disabled";
> + };
> +
> + sdhci: mmc at fe310000 {
mmc at fe310000: rockchip,txclk-tapnum: missing size tag in [[8]]
>From snps,dwcmshc-sdhci.yaml:
rockchip,txclk-tapnum:
===
maxItems: 1
default: 8
Add default 8.
There's no maxItems specified in snps,dwcmshc-sdhci.yaml.
===
description: Specify the number of delay for tx sampling.
$ref: /schemas/types.yaml#/definitions/uint8
===
#define DLL_TXCLK_TAPNUM_DEFAULT 0x8
if (of_property_read_u8(mmc_dev(host->mmc)->of_node,
"rockchip,txclk-tapnum",
&priv->txclk_tapnum))
priv->txclk_tapnum = DLL_TXCLK_TAPNUM_DEFAULT;
===
+&sdhci {
+ bus-width = <8>;
+ max-frequency = <200000000>;
+ non-removable;
+ rockchip,txclk-tapnum = <0x8>;
Remove.
Default is already 8.
+ status = "okay";
+};
> + compatible = "rockchip,rk3568-dwcmshc";
> + reg = <0x0 0xfe310000 0x0 0x10000>;
> + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
> + assigned-clocks = <&cru BCLK_EMMC>, <&cru TCLK_EMMC>;
> + assigned-clock-rates = <200000000>, <24000000>;
> + clocks = <&cru CCLK_EMMC>, <&cru HCLK_EMMC>,
> + <&cru ACLK_EMMC>, <&cru BCLK_EMMC>,
> + <&cru TCLK_EMMC>;
> + clock-names = "core", "bus", "axi", "block", "timer";
> + status = "disabled";
> + };
> +
> + dmac0: dmac at fe530000 {
> + compatible = "arm,pl330", "arm,primecell";
> + reg = <0x0 0xfe530000 0x0 0x4000>;
> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> + arm,pl330-periph-burst;
> + clocks = <&cru ACLK_BUS>;
> + clock-names = "apb_pclk";
> + #dma-cells = <1>;
> + };
> +
> + dmac1: dmac at fe550000 {
> + compatible = "arm,pl330", "arm,primecell";
> + reg = <0x0 0xfe550000 0x0 0x4000>;
> + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
> + arm,pl330-periph-burst;
> + clocks = <&cru ACLK_BUS>;
> + clock-names = "apb_pclk";
> + #dma-cells = <1>;
> + };
> +
> + i2c1: i2c at fe5a0000 {
> + compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c";
> + reg = <0x0 0xfe5a0000 0x0 0x1000>;
> + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru CLK_I2C1>, <&cru PCLK_I2C1>;
> + clock-names = "i2c", "pclk";
> + pinctrl-0 = <&i2c1_xfer>;
> + pinctrl-names = "default";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c2: i2c at fe5b0000 {
> + compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c";
> + reg = <0x0 0xfe5b0000 0x0 0x1000>;
> + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru CLK_I2C2>, <&cru PCLK_I2C2>;
> + clock-names = "i2c", "pclk";
> + pinctrl-0 = <&i2c2m0_xfer>;
> + pinctrl-names = "default";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c3: i2c at fe5c0000 {
> + compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c";
> + reg = <0x0 0xfe5c0000 0x0 0x1000>;
> + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru CLK_I2C3>, <&cru PCLK_I2C3>;
> + clock-names = "i2c", "pclk";
> + pinctrl-0 = <&i2c3m0_xfer>;
> + pinctrl-names = "default";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c4: i2c at fe5d0000 {
> + compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c";
> + reg = <0x0 0xfe5d0000 0x0 0x1000>;
> + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru CLK_I2C4>, <&cru PCLK_I2C4>;
> + clock-names = "i2c", "pclk";
> + pinctrl-0 = <&i2c4m0_xfer>;
> + pinctrl-names = "default";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c5: i2c at fe5e0000 {
> + compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c";
> + reg = <0x0 0xfe5e0000 0x0 0x1000>;
> + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru CLK_I2C5>, <&cru PCLK_I2C5>;
> + clock-names = "i2c", "pclk";
> + pinctrl-0 = <&i2c5m0_xfer>;
> + pinctrl-names = "default";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + wdt: watchdog at fe600000 {
> + compatible = "rockchip,rk3568-wdt", "snps,dw-wdt";
> + reg = <0x0 0xfe600000 0x0 0x100>;
> + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru TCLK_WDT_NS>, <&cru PCLK_WDT_NS>;
> + clock-names = "tclk", "pclk";
> + };
> +
> + uart1: serial at fe650000 {
> + compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
> + reg = <0x0 0xfe650000 0x0 0x100>;
> + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
> + clock-names = "baudclk", "apb_pclk";
> + dmas = <&dmac0 2>, <&dmac0 3>;
> + pinctrl-0 = <&uart1m0_xfer>;
> + pinctrl-names = "default";
> + reg-io-width = <4>;
> + reg-shift = <2>;
> + status = "disabled";
> + };
> +
> + uart2: serial at fe660000 {
> + compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
> + reg = <0x0 0xfe660000 0x0 0x100>;
> + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
> + clock-names = "baudclk", "apb_pclk";
> + dmas = <&dmac0 4>, <&dmac0 5>;
> + pinctrl-0 = <&uart2m0_xfer>;
> + pinctrl-names = "default";
> + reg-io-width = <4>;
> + reg-shift = <2>;
> + status = "disabled";
> + };
> +
> + uart3: serial at fe670000 {
> + compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
> + reg = <0x0 0xfe670000 0x0 0x100>;
> + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
> + clock-names = "baudclk", "apb_pclk";
> + dmas = <&dmac0 6>, <&dmac0 7>;
> + pinctrl-0 = <&uart3m0_xfer>;
> + pinctrl-names = "default";
> + reg-io-width = <4>;
> + reg-shift = <2>;
> + status = "disabled";
> + };
> +
> + uart4: serial at fe680000 {
> + compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
> + reg = <0x0 0xfe680000 0x0 0x100>;
> + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
> + clock-names = "baudclk", "apb_pclk";
> + dmas = <&dmac0 8>, <&dmac0 9>;
> + pinctrl-0 = <&uart4m0_xfer>;
> + pinctrl-names = "default";
> + reg-io-width = <4>;
> + reg-shift = <2>;
> + status = "disabled";
> + };
> +
> + uart5: serial at fe690000 {
> + compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
> + reg = <0x0 0xfe690000 0x0 0x100>;
> + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>;
> + clock-names = "baudclk", "apb_pclk";
> + dmas = <&dmac0 10>, <&dmac0 11>;
> + pinctrl-0 = <&uart5m0_xfer>;
> + pinctrl-names = "default";
> + reg-io-width = <4>;
> + reg-shift = <2>;
> + status = "disabled";
> + };
> +
> + uart6: serial at fe6a0000 {
> + compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
> + reg = <0x0 0xfe6a0000 0x0 0x100>;
> + interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru SCLK_UART6>, <&cru PCLK_UART6>;
> + clock-names = "baudclk", "apb_pclk";
> + dmas = <&dmac0 12>, <&dmac0 13>;
> + pinctrl-0 = <&uart6m0_xfer>;
> + pinctrl-names = "default";
> + reg-io-width = <4>;
> + reg-shift = <2>;
> + status = "disabled";
> + };
> +
> + uart7: serial at fe6b0000 {
> + compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
> + reg = <0x0 0xfe6b0000 0x0 0x100>;
> + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru SCLK_UART7>, <&cru PCLK_UART7>;
> + clock-names = "baudclk", "apb_pclk";
> + dmas = <&dmac0 14>, <&dmac0 15>;
> + pinctrl-0 = <&uart7m0_xfer>;
> + pinctrl-names = "default";
> + reg-io-width = <4>;
> + reg-shift = <2>;
> + status = "disabled";
> + };
> +
> + uart8: serial at fe6c0000 {
> + compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
> + reg = <0x0 0xfe6c0000 0x0 0x100>;
> + interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru SCLK_UART8>, <&cru PCLK_UART8>;
> + clock-names = "baudclk", "apb_pclk";
> + dmas = <&dmac0 16>, <&dmac0 17>;
> + pinctrl-0 = <&uart8m0_xfer>;
> + pinctrl-names = "default";
> + reg-io-width = <4>;
> + reg-shift = <2>;
> + status = "disabled";
> + };
> +
> + uart9: serial at fe6d0000 {
> + compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
> + reg = <0x0 0xfe6d0000 0x0 0x100>;
> + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru SCLK_UART9>, <&cru PCLK_UART9>;
> + clock-names = "baudclk", "apb_pclk";
> + dmas = <&dmac0 18>, <&dmac0 19>;
> + pinctrl-0 = <&uart9m0_xfer>;
> + pinctrl-names = "default";
> + reg-io-width = <4>;
> + reg-shift = <2>;
> + status = "disabled";
> + };
> +
> + pwm4: pwm at fe6e0000 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfe6e0000 0x0 0x10>;
> + clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm4_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm5: pwm at fe6e0010 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfe6e0010 0x0 0x10>;
> + clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm5_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm6: pwm at fe6e0020 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfe6e0020 0x0 0x10>;
> + clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm6_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm7: pwm at fe6e0030 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfe6e0030 0x0 0x10>;
> + clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm7_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm8: pwm at fe6f0000 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfe6f0000 0x0 0x10>;
> + clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm8m0_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm9: pwm at fe6f0010 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfe6f0010 0x0 0x10>;
> + clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm9m0_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm10: pwm at fe6f0020 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfe6f0020 0x0 0x10>;
> + clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm10m0_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm11: pwm at fe6f0030 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfe6f0030 0x0 0x10>;
> + clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm11m0_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm12: pwm at fe700000 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfe700000 0x0 0x10>;
> + clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm12m0_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm13: pwm at fe700010 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfe700010 0x0 0x10>;
> + clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm13m0_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm14: pwm at fe700020 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfe700020 0x0 0x10>;
> + clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm14m0_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm15: pwm at fe700030 {
> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> + reg = <0x0 0xfe700030 0x0 0x10>;
> + clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
> + clock-names = "pwm", "pclk";
> + pinctrl-0 = <&pwm15m0_pins>;
> + pinctrl-names = "active";
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pinctrl: pinctrl {
> + compatible = "rockchip,rk3568-pinctrl";
> + rockchip,grf = <&grf>;
> + rockchip,pmu = <&pmugrf>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + gpio0: gpio at fdd60000 {
For Heiko:
Driver must also change for this nodename.
> + compatible = "rockchip,gpio-bank";
> + reg = <0x0 0xfdd60000 0x0 0x100>;
> + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&pmucru PCLK_GPIO0>, <&pmucru DBCLK_GPIO0>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpio1: gpio at fe740000 {
> + compatible = "rockchip,gpio-bank";
> + reg = <0x0 0xfe740000 0x0 0x100>;
> + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpio2: gpio at fe750000 {
> + compatible = "rockchip,gpio-bank";
> + reg = <0x0 0xfe750000 0x0 0x100>;
> + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpio3: gpio at fe760000 {
> + compatible = "rockchip,gpio-bank";
> + reg = <0x0 0xfe760000 0x0 0x100>;
> + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpio4: gpio at fe770000 {
> + compatible = "rockchip,gpio-bank";
> + reg = <0x0 0xfe770000 0x0 0x100>;
> + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> + };
> +};
> +
> +#include "rk3568-pinctrl.dtsi"
>
More information about the Linux-rockchip
mailing list