[PATCH v2 6/7] arm64: dts: rockchip: add core dtsi for RK3568 SoC
jay.xu at rock-chips.com
jay.xu at rock-chips.com
Tue Apr 27 01:35:15 BST 2021
Hi, Johan Jonker:
--------------
jay.xu at rock-chips.com
>Hi Liang,
>
>Some minor things to improve.
>Found with the command below.
>
>make ARCH=arm64 dtbs_check
>===
>
>pwm-rockchip.yaml is now in linux-next
>Maybe add rockchip,rk3568-pwm too.
>
>===
>
>compatible = "rockchip,rk3568";
>Maybe add this together with other rkXXXX SoCs to rockchip.yaml on top
>of board list ???
>Please advise.
>
>===
>
>Change rockchip,gpio-bank.yaml
>
> clocks:
> maxItems: 2
>
>===
>
>TODO:
>rockchip,rk3568-grf
>rockchip,rk3568-pmugrf
>
>===
>
>git am
>PATCH-v2-5-7-arm64-dts-rockchip-add-generic-pinconfig-settings-used-by-most-Rockchip-socs.patch
>Applying: arm64: dts: rockchip: add generic pinconfig settings used by
>most Rockchip socs
>.git/rebase-apply/patch:356: new blank line at EOF.
>+
>warning: 1 line adds whitespace errors.
>
>===
>
>Change commit message in:
>[PATCH v2 3/7] dt-bindings: mmc: rockchip-dw-mshc: add description for
>rk3568
>
>from:
>add "rockchip,rk3568-dwcmshc", "snps,dwcmshc-sdhci" for mmc nodes on
>a rk3568 platform to rockchip-dw-mshc.yaml.
>
>to:
>... "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc" ...
>
>Do not mix dw-mshc and dwcmshc. ;)
>
>===
>
>Johan
>
>On 4/25/21 11:44 AM, cl at rock-chips.com wrote:
>> From: Liang Chen <cl at rock-chips.com>
>>
>> RK3568 is a high-performance and low power quad-core application processor
>> designed for personal mobile internet device and AIoT equipments. This patch
>> add basic core dtsi file for it.
>>
>> We use scmi_clk for cortex-a55 instead of standard ARMCLK, so that
>> kernel/uboot/rtos can change cpu clk with the same code in ATF, and we will
>> enalbe a special high-performacne PLL when high frequency is required. The
>> smci_clk code is in ATF, and clkid for cpu is 0, as below:
>>
>> cpu0: cpu at 0 {
>> device_type = "cpu";
>> compatible = "arm,cortex-a55";
>> reg = <0x0 0x0>;
>> clocks = <&scmi_clk 0>;
>> };
>>
>> Signed-off-by: Liang Chen <cl at rock-chips.com>
>> ---
>> .../boot/dts/rockchip/rk3568-pinctrl.dtsi | 3119 +++++++++++++++++
>> arch/arm64/boot/dts/rockchip/rk3568.dtsi | 812 +++++
>> 2 files changed, 3931 insertions(+)
>> create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-pinctrl.dtsi
>> create mode 100644 arch/arm64/boot/dts/rockchip/rk3568.dtsi
>>
>
>[..]
>
>> +
>> + gpio {
>
>From gpio.yaml
>
>properties:
> gpio:
> # 'gpio' can appear as a property or node name
> oneOf:
> - type: object
> - $ref: "/schemas/types.yaml#/definitions/phandle-array"
>
For this reason, then maybe we can change it to 'gpio-function' ?
>
>> + /omit-if-no-ref/
>
>> + tsadc_gpio: tsadc-gpio {
>
>From gpio-consumer.yaml
>
>properties:
> gpios:
> $ref: "/schemas/types.yaml#/definitions/phandle-array"
>
>patternProperties:
> "(?<!,nr)-gpios?$":
> $ref: "/schemas/types.yaml#/definitions/phandle-array"
>
>===
>
>Try to avoid anything with gpio.
>
>> + rockchip,pins =
>> + <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
>> + };
>> + };
>> +};
>> diff --git a/arch/arm64/boot/dts/rockchip/rk3568.dtsi b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
>> new file mode 100644
>> index 000000000000..66cb50218ca1
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
>> @@ -0,0 +1,812 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +/*
>> + * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
>> + */
>> +
>> +#include <dt-bindings/clock/rk3568-cru.h>
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>> +#include <dt-bindings/interrupt-controller/irq.h>
>> +#include <dt-bindings/phy/phy.h>
>> +#include <dt-bindings/pinctrl/rockchip.h>
>> +#include <dt-bindings/soc/rockchip,boot-mode.h>
>> +#include <dt-bindings/thermal/thermal.h>
>> +
>> +/ {
>
>> + compatible = "rockchip,rk3568";
>
>Maybe add this together with other rkXXXX SoCs to rockchip.yaml on top
>of board list ???
>Please advise.
>
>> +
>> + interrupt-parent = <&gic>;
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> +
>> + aliases {
>> + gpio0 = &gpio0;
>> + gpio1 = &gpio1;
>> + gpio2 = &gpio2;
>> + gpio3 = &gpio3;
>> + gpio4 = &gpio4;
>> + i2c0 = &i2c0;
>> + i2c1 = &i2c1;
>> + i2c2 = &i2c2;
>> + i2c3 = &i2c3;
>> + i2c4 = &i2c4;
>> + i2c5 = &i2c5;
>
>> + mmc0 = &sdhci;
>> + mmc1 = &sdmmc0;
>> + mmc2 = &sdmmc1;
>> + mmc3 = &sdmmc2;
>
>From a privious discussion: aliases for mmc should go from the dtsi to
>the board dts
>sort mmc aliases based on reg address and availability, so no number gap
>
>> + serial0 = &uart0;
>> + serial1 = &uart1;
>> + serial2 = &uart2;
>> + serial3 = &uart3;
>> + serial4 = &uart4;
>> + serial5 = &uart5;
>> + serial6 = &uart6;
>> + serial7 = &uart7;
>> + serial8 = &uart8;
>> + serial9 = &uart9;
>> + };
>> +
>> + cpus {
>> + #address-cells = <2>;
>> + #size-cells = <0>;
>> +
>> + cpu0: cpu at 0 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a55";
>> + reg = <0x0 0x0>;
>> + clocks = <&scmi_clk 0>;
>> + enable-method = "psci";
>> + operating-points-v2 = <&cpu0_opp_table>;
>> + };
>> +
>> + cpu1: cpu at 100 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a55";
>> + reg = <0x0 0x100>;
>> + enable-method = "psci";
>> + operating-points-v2 = <&cpu0_opp_table>;
>> + };
>> +
>> + cpu2: cpu at 200 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a55";
>> + reg = <0x0 0x200>;
>> + enable-method = "psci";
>> + operating-points-v2 = <&cpu0_opp_table>;
>> + };
>> +
>> + cpu3: cpu at 300 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a55";
>> + reg = <0x0 0x300>;
>> + enable-method = "psci";
>> + operating-points-v2 = <&cpu0_opp_table>;
>> + };
>> + };
>> +
>> + cpu0_opp_table: cpu0-opp-table {
>> + compatible = "operating-points-v2";
>> + opp-shared;
>> +
>> + opp-408000000 {
>> + opp-hz = /bits/ 64 <408000000>;
>> + opp-microvolt = <825000 825000 1150000>;
>> + clock-latency-ns = <40000>;
>> + };
>
>Add all empty lines between
>
>> + opp-600000000 {
>> + opp-hz = /bits/ 64 <600000000>;
>> + opp-microvolt = <825000 825000 1150000>;
>> + };
>> + opp-816000000 {
>> + opp-hz = /bits/ 64 <816000000>;
>> + opp-microvolt = <825000 825000 1150000>;
>> + opp-suspend;
>> + };
>> + opp-1104000000 {
>> + opp-hz = /bits/ 64 <1104000000>;
>> + opp-microvolt = <825000 825000 1150000>;
>> + };
>> + opp-1416000000 {
>> + opp-hz = /bits/ 64 <1416000000>;
>> + opp-microvolt = <900000 900000 1150000>;
>> + };
>> + opp-1608000000 {
>> + opp-hz = /bits/ 64 <1608000000>;
>> + opp-microvolt = <975000 975000 1150000>;
>> + };
>> + opp-1800000000 {
>> + opp-hz = /bits/ 64 <1800000000>;
>> + opp-microvolt = <1050000 1050000 1150000>;
>> + };
>> + opp-1992000000 {
>> + opp-hz = /bits/ 64 <1992000000>;
>> + opp-microvolt = <1150000 1150000 1150000>;
>> + };
>> + };
>> +
>> + firmware {
>> + scmi: scmi {
>> + compatible = "arm,scmi-smc";
>> + arm,smc-id = <0x82000010>;
>> + shmem = <&scmi_shmem>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + scmi_clk: protocol at 14 {
>> + reg = <0x14>;
>> + #clock-cells = <1>;
>> + };
>> + };
>> +
>> + };
>> +
>> + pmu {
>
>> + compatible = "arm,cortex-a55-pmu", "arm,armv8-pmuv3";
>
>compatible: ['arm,cortex-a55-pmu', 'arm,armv8-pmuv3'] is too long
>
>> + interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
>> + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
>> + };
>> +
>> + psci {
>> + compatible = "arm,psci-1.0";
>> + method = "smc";
>> + };
>> +
>
>> + shmem at 10f000 {
>
>shmem at 10f000: $nodename:0: 'shmem at 10f000' does not match '^sram(@.*)?'
>
>> + compatible = "mmio-sram";
>> + reg = <0x0 0x0010f000 0x0 0x100>;
>> +
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges = <0 0x0 0x0010f000 0x100>;
>> +
>
>> + scmi_shmem: scmi-shmem at 10f000 {
>
>shmem at 10f000: 'scmi-shmem at 10f000' does not match any of the regexes:
>'^([a-z]*-)?sram(-section)?@[a-f0-9]+$'
>
>> + compatible = "arm,scmi-shmem";
>> + reg = <0x0 0x0010f000 0x0 0x100>;
>> + };
>> + };
>> +
>> + timer {
>> + compatible = "arm,armv8-timer";
>> + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
>> + arm,no-tick-in-suspend;
>> + };
>> +
>> + xin24m: xin24m {
>> + compatible = "fixed-clock";
>> + clock-frequency = <24000000>;
>> + clock-output-names = "xin24m";
>> + #clock-cells = <0>;
>> + };
>> +
>> + xin32k: xin32k {
>> + compatible = "fixed-clock";
>> + clock-frequency = <32768>;
>> + clock-output-names = "xin32k";
>> + pinctrl-0 = <&clk32k_out0>;
>> + pinctrl-names = "default";
>> + #clock-cells = <0>;
>> + };
>> +
>> + gic: interrupt-controller at fd400000 {
>> + compatible = "arm,gic-v3";
>> + reg = <0x0 0xfd400000 0 0x10000>, /* GICD */
>> + <0x0 0xfd460000 0 0xc0000>; /* GICR */
>> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
>> + interrupt-controller;
>> + #interrupt-cells = <3>;
>
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>
>subnodes ??
>
>> + ranges;
>> + };
>> +
>> + pmugrf: syscon at fdc20000 {
>
>> + compatible = "rockchip,rk3568-pmugrf", "syscon", "simple-mfd";
>
>TODO
>
>> + reg = <0x0 0xfdc20000 0x0 0x10000>;
>> +
>> + reboot_mode: reboot-mode {
>> + compatible = "syscon-reboot-mode";
>> + mode-bootloader = <BOOT_BL_DOWNLOAD>;
>> + mode-fastboot = <BOOT_FASTBOOT>;
>> + mode-loader = <BOOT_BL_DOWNLOAD>;
>> + mode-normal = <BOOT_NORMAL>;
>> + mode-recovery = <BOOT_RECOVERY>;
>> + offset = <0x200>;
>> + };
>> + };
>> +
>> + grf: syscon at fdc60000 {
>
>> + compatible = "rockchip,rk3568-grf", "syscon", "simple-mfd";
>
>TODO
>
>> + reg = <0x0 0xfdc60000 0x0 0x10000>;
>> + };
>> +
>> + pmucru: clock-controller at fdd00000 {
>
>> + compatible = "rockchip,rk3568-pmucru";
>> + reg = <0x0 0xfdd00000 0x0 0x1000>;
>> + rockchip,grf = <&grf>;
>> + rockchip,pmugrf = <&pmugrf>;
>> + #clock-cells = <1>;
>> + #reset-cells = <1>;
>> + };
>> +
>> + cru: clock-controller at fdd20000 {
>> + compatible = "rockchip,rk3568-cru";
>> + reg = <0x0 0xfdd20000 0x0 0x1000>;
>> + rockchip,grf = <&grf>;
>> + #clock-cells = <1>;
>> + #reset-cells = <1>;
>> +
>> + assigned-clocks =
>> + <&pmucru CLK_RTC_32K>, <&pmucru PLL_PPLL>,
>> + <&pmucru PCLK_PMU>, <&cru PLL_CPLL>,
>> + <&cru PLL_GPLL>, <&cru ACLK_BUS>,
>> + <&cru PCLK_BUS>, <&cru ACLK_TOP_HIGH>,
>> + <&cru ACLK_TOP_LOW>, <&cru HCLK_TOP>,
>> + <&cru PCLK_TOP>, <&cru ACLK_PERIMID>,
>> + <&cru HCLK_PERIMID>, <&cru PLL_NPLL>,
>> + <&cru ACLK_PIPE>, <&cru PCLK_PIPE>,
>> + <&cru ACLK_VOP>;
>> + assigned-clock-rates =
>> + <32768>, <200000000>,
>> + <100000000>, <1000000000>,
>> + <1188000000>, <150000000>,
>> + <100000000>, <500000000>,
>> + <400000000>, <150000000>,
>> + <100000000>, <300000000>,
>> + <150000000>, <1200000000>,
>> + <400000000>, <100000000>,
>> + <500000000>;
>> + assigned-clock-parents =
>> + <&pmucru CLK_RTC32K_FRAC>;
>> + };
>> +
>> + i2c0: i2c at fdd40000 {
>> + compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c";
>> + reg = <0x0 0xfdd40000 0x0 0x1000>;
>> + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&pmucru CLK_I2C0>, <&pmucru PCLK_I2C0>;
>> + clock-names = "i2c", "pclk";
>> + pinctrl-0 = <&i2c0_xfer>;
>> + pinctrl-names = "default";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + uart0: serial at fdd50000 {
>> + compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
>> + reg = <0x0 0xfdd50000 0x0 0x100>;
>> + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&pmucru SCLK_UART0>, <&pmucru PCLK_UART0>;
>> + clock-names = "baudclk", "apb_pclk";
>> + dmas = <&dmac0 0>, <&dmac0 1>;
>> + pinctrl-0 = <&uart0_xfer>;
>> + pinctrl-names = "default";
>> + reg-io-width = <4>;
>> + reg-shift = <2>;
>> + status = "disabled";
>> + };
>> +
>> + pwm0: pwm at fdd70000 {
>> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
>> + reg = <0x0 0xfdd70000 0x0 0x10>;
>> + clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>;
>> + clock-names = "pwm", "pclk";
>> + pinctrl-0 = <&pwm0m0_pins>;
>> + pinctrl-names = "active";
>> + #pwm-cells = <3>;
>> + status = "disabled";
>> + };
>> +
>> + pwm1: pwm at fdd70010 {
>> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
>> + reg = <0x0 0xfdd70010 0x0 0x10>;
>> + clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>;
>> + clock-names = "pwm", "pclk";
>> + pinctrl-0 = <&pwm1m0_pins>;
>> + pinctrl-names = "active";
>> + #pwm-cells = <3>;
>> + status = "disabled";
>> + };
>> +
>> + pwm2: pwm at fdd70020 {
>> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
>> + reg = <0x0 0xfdd70020 0x0 0x10>;
>> + clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>;
>> + clock-names = "pwm", "pclk";
>> + pinctrl-0 = <&pwm2m0_pins>;
>> + pinctrl-names = "active";
>> + #pwm-cells = <3>;
>> + status = "disabled";
>> + };
>> +
>> + pwm3: pwm at fdd70030 {
>> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
>> + reg = <0x0 0xfdd70030 0x0 0x10>;
>> + clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>;
>> + clock-names = "pwm", "pclk";
>> + pinctrl-0 = <&pwm3_pins>;
>> + pinctrl-names = "active";
>> + #pwm-cells = <3>;
>> + status = "disabled";
>> + };
>> +
>> + sdmmc2: dwmmc at fe000000 {
>
>dwmmc at fe000000: $nodename:0: 'dwmmc at fe000000' does not match '^mmc(@.*)?$'
>
>> + compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc";
>> + reg = <0x0 0xfe000000 0x0 0x4000>;
>> + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&cru HCLK_SDMMC2>, <&cru CLK_SDMMC2>,
>> + <&cru SCLK_SDMMC2_DRV>, <&cru SCLK_SDMMC2_SAMPLE>;
>> + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
>> + fifo-depth = <0x100>;
>> + max-frequency = <150000000>;
>> + resets = <&cru SRST_SDMMC2>;
>> + reset-names = "reset";
>> + status = "disabled";
>> + };
>> +
>
>> + sdmmc0: dwmmc at fe2b0000 {
>
>dwmmc at fe2b0000: $nodename:0: 'dwmmc at fe2b0000' does not match '^mmc(@.*)?$'
>
>> + compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc";
>> + reg = <0x0 0xfe2b0000 0x0 0x4000>;
>> + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&cru HCLK_SDMMC0>, <&cru CLK_SDMMC0>,
>> + <&cru SCLK_SDMMC0_DRV>, <&cru SCLK_SDMMC0_SAMPLE>;
>> + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
>> + fifo-depth = <0x100>;
>> + max-frequency = <150000000>;
>> + resets = <&cru SRST_SDMMC0>;
>> + reset-names = "reset";
>> + status = "disabled";
>> + };
>> +
>
>> + sdmmc1: dwmmc at fe2c0000 {
>
>dwmmc at fe2c0000: $nodename:0: 'dwmmc at fe2c0000' does not match '^mmc(@.*)?$'
>
>> + compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc";
>> + reg = <0x0 0xfe2c0000 0x0 0x4000>;
>> + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&cru HCLK_SDMMC1>, <&cru CLK_SDMMC1>,
>> + <&cru SCLK_SDMMC1_DRV>, <&cru SCLK_SDMMC1_SAMPLE>;
>> + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
>> + fifo-depth = <0x100>;
>> + max-frequency = <150000000>;
>> + resets = <&cru SRST_SDMMC1>;
>> + reset-names = "reset";
>> + status = "disabled";
>> + };
>> +
>
>> + sdhci: sdhci at fe310000 {
>
>sdhci at fe310000: $nodename:0: 'sdhci at fe310000' does not match '^mmc(@.*)?$'
>
>> + compatible = "rockchip,rk3568-dwcmshc";
>> + reg = <0x0 0xfe310000 0x0 0x10000>;
>> + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
>> + assigned-clocks = <&cru BCLK_EMMC>, <&cru TCLK_EMMC>;
>> + assigned-clock-rates = <200000000>, <24000000>;
>> + clocks = <&cru CCLK_EMMC>, <&cru HCLK_EMMC>,
>> + <&cru ACLK_EMMC>, <&cru BCLK_EMMC>,
>> + <&cru TCLK_EMMC>;
>> + clock-names = "core", "bus", "axi", "block", "timer";
>> + status = "disabled";
>> + };
>> +
>> + dmac0: dmac at fe530000 {
>> + compatible = "arm,pl330", "arm,primecell";
>> + reg = <0x0 0xfe530000 0x0 0x4000>;
>> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
>> + arm,pl330-periph-burst;
>> + clocks = <&cru ACLK_BUS>;
>> + clock-names = "apb_pclk";
>> + #dma-cells = <1>;
>> + };
>> +
>> + dmac1: dmac at fe550000 {
>> + compatible = "arm,pl330", "arm,primecell";
>> + reg = <0x0 0xfe550000 0x0 0x4000>;
>> + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
>> + arm,pl330-periph-burst;
>> + clocks = <&cru ACLK_BUS>;
>> + clock-names = "apb_pclk";
>> + #dma-cells = <1>;
>> + };
>> +
>> + i2c1: i2c at fe5a0000 {
>> + compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c";
>> + reg = <0x0 0xfe5a0000 0x0 0x1000>;
>> + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&cru CLK_I2C1>, <&cru PCLK_I2C1>;
>> + clock-names = "i2c", "pclk";
>> + pinctrl-0 = <&i2c1_xfer>;
>> + pinctrl-names = "default";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + i2c2: i2c at fe5b0000 {
>> + compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c";
>> + reg = <0x0 0xfe5b0000 0x0 0x1000>;
>> + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&cru CLK_I2C2>, <&cru PCLK_I2C2>;
>> + clock-names = "i2c", "pclk";
>> + pinctrl-0 = <&i2c2m0_xfer>;
>> + pinctrl-names = "default";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + i2c3: i2c at fe5c0000 {
>> + compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c";
>> + reg = <0x0 0xfe5c0000 0x0 0x1000>;
>> + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&cru CLK_I2C3>, <&cru PCLK_I2C3>;
>> + clock-names = "i2c", "pclk";
>> + pinctrl-0 = <&i2c3m0_xfer>;
>> + pinctrl-names = "default";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + i2c4: i2c at fe5d0000 {
>> + compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c";
>> + reg = <0x0 0xfe5d0000 0x0 0x1000>;
>> + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&cru CLK_I2C4>, <&cru PCLK_I2C4>;
>> + clock-names = "i2c", "pclk";
>> + pinctrl-0 = <&i2c4m0_xfer>;
>> + pinctrl-names = "default";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + i2c5: i2c at fe5e0000 {
>> + compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c";
>> + reg = <0x0 0xfe5e0000 0x0 0x1000>;
>> + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&cru CLK_I2C5>, <&cru PCLK_I2C5>;
>> + clock-names = "i2c", "pclk";
>> + pinctrl-0 = <&i2c5m0_xfer>;
>> + pinctrl-names = "default";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + wdt: watchdog at fe600000 {
>> + compatible = "rockchip,rk3568-wdt", "snps,dw-wdt";
>> + reg = <0x0 0xfe600000 0x0 0x100>;
>
>> + clocks = <&cru TCLK_WDT_NS>, <&cru PCLK_WDT_NS>;
>> + clock-names = "tclk", "pclk";
>
>below interrupts
>
>> + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
>
>> + };
>> +
>> + uart1: serial at fe650000 {
>> + compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
>> + reg = <0x0 0xfe650000 0x0 0x100>;
>> + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
>> + clock-names = "baudclk", "apb_pclk";
>> + dmas = <&dmac0 2>, <&dmac0 3>;
>> + pinctrl-0 = <&uart1m0_xfer>;
>> + pinctrl-names = "default";
>> + reg-io-width = <4>;
>> + reg-shift = <2>;
>> + status = "disabled";
>> + };
>> +
>> + uart2: serial at fe660000 {
>> + compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
>> + reg = <0x0 0xfe660000 0x0 0x100>;
>> + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
>> + clock-names = "baudclk", "apb_pclk";
>> + dmas = <&dmac0 4>, <&dmac0 5>;
>> + pinctrl-0 = <&uart2m0_xfer>;
>> + pinctrl-names = "default";
>> + reg-io-width = <4>;
>> + reg-shift = <2>;
>> + status = "disabled";
>> + };
>> +
>> + uart3: serial at fe670000 {
>> + compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
>> + reg = <0x0 0xfe670000 0x0 0x100>;
>> + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
>> + clock-names = "baudclk", "apb_pclk";
>> + dmas = <&dmac0 6>, <&dmac0 7>;
>> + pinctrl-0 = <&uart3m0_xfer>;
>> + pinctrl-names = "default";
>> + reg-io-width = <4>;
>> + reg-shift = <2>;
>> + status = "disabled";
>> + };
>> +
>> + uart4: serial at fe680000 {
>> + compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
>> + reg = <0x0 0xfe680000 0x0 0x100>;
>> + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
>> + clock-names = "baudclk", "apb_pclk";
>> + dmas = <&dmac0 8>, <&dmac0 9>;
>> + pinctrl-0 = <&uart4m0_xfer>;
>> + pinctrl-names = "default";
>> + reg-io-width = <4>;
>> + reg-shift = <2>;
>> + status = "disabled";
>> + };
>> +
>> + uart5: serial at fe690000 {
>> + compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
>> + reg = <0x0 0xfe690000 0x0 0x100>;
>> + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>;
>> + clock-names = "baudclk", "apb_pclk";
>> + dmas = <&dmac0 10>, <&dmac0 11>;
>> + pinctrl-0 = <&uart5m0_xfer>;
>> + pinctrl-names = "default";
>> + reg-io-width = <4>;
>> + reg-shift = <2>;
>> + status = "disabled";
>> + };
>> +
>> + uart6: serial at fe6a0000 {
>> + compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
>> + reg = <0x0 0xfe6a0000 0x0 0x100>;
>> + interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&cru SCLK_UART6>, <&cru PCLK_UART6>;
>> + clock-names = "baudclk", "apb_pclk";
>> + dmas = <&dmac0 12>, <&dmac0 13>;
>> + pinctrl-0 = <&uart6m0_xfer>;
>> + pinctrl-names = "default";
>> + reg-io-width = <4>;
>> + reg-shift = <2>;
>> + status = "disabled";
>> + };
>> +
>> + uart7: serial at fe6b0000 {
>> + compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
>> + reg = <0x0 0xfe6b0000 0x0 0x100>;
>> + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&cru SCLK_UART7>, <&cru PCLK_UART7>;
>> + clock-names = "baudclk", "apb_pclk";
>> + dmas = <&dmac0 14>, <&dmac0 15>;
>> + pinctrl-0 = <&uart7m0_xfer>;
>> + pinctrl-names = "default";
>> + reg-io-width = <4>;
>> + reg-shift = <2>;
>> + status = "disabled";
>> + };
>> +
>> + uart8: serial at fe6c0000 {
>> + compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
>> + reg = <0x0 0xfe6c0000 0x0 0x100>;
>> + interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&cru SCLK_UART8>, <&cru PCLK_UART8>;
>> + clock-names = "baudclk", "apb_pclk";
>> + dmas = <&dmac0 16>, <&dmac0 17>;
>> + pinctrl-0 = <&uart8m0_xfer>;
>> + pinctrl-names = "default";
>> + reg-io-width = <4>;
>> + reg-shift = <2>;
>> + status = "disabled";
>> + };
>> +
>> + uart9: serial at fe6d0000 {
>> + compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
>> + reg = <0x0 0xfe6d0000 0x0 0x100>;
>> + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&cru SCLK_UART9>, <&cru PCLK_UART9>;
>> + clock-names = "baudclk", "apb_pclk";
>> + dmas = <&dmac0 18>, <&dmac0 19>;
>> + pinctrl-0 = <&uart9m0_xfer>;
>> + pinctrl-names = "default";
>> + reg-io-width = <4>;
>> + reg-shift = <2>;
>> + status = "disabled";
>> + };
>> +
>> + pwm4: pwm at fe6e0000 {
>> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
>> + reg = <0x0 0xfe6e0000 0x0 0x10>;
>> + clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
>> + clock-names = "pwm", "pclk";
>> + pinctrl-0 = <&pwm4_pins>;
>> + pinctrl-names = "active";
>> + #pwm-cells = <3>;
>> + status = "disabled";
>> + };
>> +
>> + pwm5: pwm at fe6e0010 {
>> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
>> + reg = <0x0 0xfe6e0010 0x0 0x10>;
>> + clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
>> + clock-names = "pwm", "pclk";
>> + pinctrl-0 = <&pwm5_pins>;
>> + pinctrl-names = "active";
>> + #pwm-cells = <3>;
>> + status = "disabled";
>> + };
>> +
>> + pwm6: pwm at fe6e0020 {
>> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
>> + reg = <0x0 0xfe6e0020 0x0 0x10>;
>> + clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
>> + clock-names = "pwm", "pclk";
>> + pinctrl-0 = <&pwm6_pins>;
>> + pinctrl-names = "active";
>> + #pwm-cells = <3>;
>> + status = "disabled";
>> + };
>> +
>> + pwm7: pwm at fe6e0030 {
>> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
>> + reg = <0x0 0xfe6e0030 0x0 0x10>;
>> + clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
>> + clock-names = "pwm", "pclk";
>> + pinctrl-0 = <&pwm7_pins>;
>> + pinctrl-names = "active";
>> + #pwm-cells = <3>;
>> + status = "disabled";
>> + };
>> +
>> + pwm8: pwm at fe6f0000 {
>> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
>> + reg = <0x0 0xfe6f0000 0x0 0x10>;
>> + clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
>> + clock-names = "pwm", "pclk";
>> + pinctrl-0 = <&pwm8m0_pins>;
>> + pinctrl-names = "active";
>> + #pwm-cells = <3>;
>> + status = "disabled";
>> + };
>> +
>> + pwm9: pwm at fe6f0010 {
>> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
>> + reg = <0x0 0xfe6f0010 0x0 0x10>;
>> + clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
>> + clock-names = "pwm", "pclk";
>> + pinctrl-0 = <&pwm9m0_pins>;
>> + pinctrl-names = "active";
>> + #pwm-cells = <3>;
>> + status = "disabled";
>> + };
>> +
>> + pwm10: pwm at fe6f0020 {
>> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
>> + reg = <0x0 0xfe6f0020 0x0 0x10>;
>> + clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
>> + clock-names = "pwm", "pclk";
>> + pinctrl-0 = <&pwm10m0_pins>;
>> + pinctrl-names = "active";
>> + #pwm-cells = <3>;
>> + status = "disabled";
>> + };
>> +
>> + pwm11: pwm at fe6f0030 {
>> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
>> + reg = <0x0 0xfe6f0030 0x0 0x10>;
>> + clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
>> + clock-names = "pwm", "pclk";
>> + pinctrl-0 = <&pwm11m0_pins>;
>> + pinctrl-names = "active";
>> + #pwm-cells = <3>;
>> + status = "disabled";
>> + };
>> +
>> + pwm12: pwm at fe700000 {
>> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
>> + reg = <0x0 0xfe700000 0x0 0x10>;
>> + clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
>> + clock-names = "pwm", "pclk";
>> + pinctrl-0 = <&pwm12m0_pins>;
>> + pinctrl-names = "active";
>> + #pwm-cells = <3>;
>> + status = "disabled";
>> + };
>> +
>> + pwm13: pwm at fe700010 {
>> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
>> + reg = <0x0 0xfe700010 0x0 0x10>;
>> + clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
>> + clock-names = "pwm", "pclk";
>> + pinctrl-0 = <&pwm13m0_pins>;
>> + pinctrl-names = "active";
>> + #pwm-cells = <3>;
>> + status = "disabled";
>> + };
>> +
>> + pwm14: pwm at fe700020 {
>> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
>> + reg = <0x0 0xfe700020 0x0 0x10>;
>> + clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
>> + clock-names = "pwm", "pclk";
>> + pinctrl-0 = <&pwm14m0_pins>;
>> + pinctrl-names = "active";
>> + #pwm-cells = <3>;
>> + status = "disabled";
>> + };
>> +
>> + pwm15: pwm at fe700030 {
>> + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
>> + reg = <0x0 0xfe700030 0x0 0x10>;
>> + clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
>> + clock-names = "pwm", "pclk";
>> + pinctrl-0 = <&pwm15m0_pins>;
>> + pinctrl-names = "active";
>> + #pwm-cells = <3>;
>> + status = "disabled";
>> + };
>> +
>> + pinctrl: pinctrl {
>> + compatible = "rockchip,rk3568-pinctrl";
>> + rockchip,grf = <&grf>;
>> + rockchip,pmu = <&pmugrf>;
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> + ranges;
>> +
>> + gpio0: gpio at fdd60000 {
>> + compatible = "rockchip,gpio-bank";
>> + reg = <0x0 0xfdd60000 0x0 0x100>;
>> + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
>
>> + clocks = <&pmucru PCLK_GPIO0>, <&pmucru DBCLK_GPIO0>;
>
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpio1: gpio at fe740000 {
>> + compatible = "rockchip,gpio-bank";
>> + reg = <0x0 0xfe740000 0x0 0x100>;
>> + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
>
>> + clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>;
>
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpio2: gpio at fe750000 {
>> + compatible = "rockchip,gpio-bank";
>> + reg = <0x0 0xfe750000 0x0 0x100>;
>> + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
>
>> + clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>;
>
>gpio at fe750000: clocks: [[13, 357], [13, 358]] is too long
>
>Change rockchip,gpio-bank.yaml
>
> clocks:
> maxItems: 2
>
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpio3: gpio at fe760000 {
>> + compatible = "rockchip,gpio-bank";
>> + reg = <0x0 0xfe760000 0x0 0x100>;
>> + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
>
>> + clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>;
>
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpio4: gpio at fe770000 {
>> + compatible = "rockchip,gpio-bank";
>> + reg = <0x0 0xfe770000 0x0 0x100>;
>> + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
>
>> + clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>;
>
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> + };
>> +};
>> +
>> +#include "rk3568-pinctrl.dtsi"
>>
>
>
>
More information about the Linux-rockchip
mailing list