[PATCH v9 03/13] media: hantro: Use syscon instead of 'ctrl' register
Benjamin Gaignard
benjamin.gaignard at collabora.com
Tue Apr 20 10:10:07 BST 2021
Le 16/04/2021 à 17:14, Lucas Stach a écrit :
> Am Freitag, dem 16.04.2021 um 15:08 +0200 schrieb Benjamin Gaignard:
>> Le 16/04/2021 à 12:54, Lucas Stach a écrit :
>>> Am Mittwoch, dem 07.04.2021 um 09:35 +0200 schrieb Benjamin Gaignard:
>>>> In order to be able to share the control hardware block between
>>>> VPUs use a syscon instead a ioremap it in the driver.
>>>> To keep the compatibility with older DT if 'nxp,imx8mq-vpu-ctrl'
>>>> phandle is not found look at 'ctrl' reg-name.
>>>> With the method it becomes useless to provide a list of register
>>>> names so remove it.
>>> Sorry for putting a spoke in the wheel after many iterations of the
>>> series.
>>>
>>> We just discussed a way forward on how to handle the clocks and resets
>>> provided by the blkctl block on i.MX8MM and later and it seems there is
>>> a consensus on trying to provide virtual power domains from a blkctl
>>> driver, controlling clocks and resets for the devices in the power
>>> domain. I would like to avoid introducing yet another way of handling
>>> the blkctl and thus would like to align the i.MX8MQ VPU blkctl with
>>> what we are planning to do on the later chip generations.
>>>
>>> CC'ing Jacky Bai and Peng Fan from NXP, as they were going to give this
>>> virtual power domain thing a shot.
>> That could replace the 3 first patches and Dt patche of this series
>> but that will not impact the hevc part, so I wonder if pure hevc patches
>> could be merged anyway ?
>> They are reviewed and don't depend of how the ctrl block is managed.
> I'm not really in a position to give any informed opinion about that
> hvec patches, as I only skimmed them, but I don't see any reason to
> delay patches 04-11 from this series until the i.MX8M platform issues
> are sorted. AFAICS those things are totally orthogonal.
Hi Hans,
What do you think about this proposal to split this series ?
Get hevc part merged could allow me to continue to add features
like scaling lists, compressed reference buffers and 10-bit supports.
Regards,
Benjamin
>
> Regards,
> Lucas
>
>>> Regards,
>>> Lucas
>>>
>>>> Signed-off-by: Benjamin Gaignard <benjamin.gaignard at collabora.com>
>>>> Reviewed-by: Philipp Zabel <p.zabel at pengutronix.de>
>>>> ---
>>>> version 9:
>>>> - Corrections in commit message
>>>>
>>>> version 7:
>>>> - Add Philipp reviewed-by tag.
>>>> - Change syscon phandle name.
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> version 5:
>>>> - use syscon instead of VPU reset driver.
>>>> - if DT doesn't provide syscon keep backward compatibilty by using
>>>> 'ctrl' reg-name.
>>>>
>>>> drivers/staging/media/hantro/hantro.h | 5 +-
>>>> drivers/staging/media/hantro/imx8m_vpu_hw.c | 52 ++++++++++++---------
>>>> 2 files changed, 34 insertions(+), 23 deletions(-)
>>>>
>>>> diff --git a/drivers/staging/media/hantro/hantro.h b/drivers/staging/media/hantro/hantro.h
>>>> index 6c1b888abe75..37b9ce04bd4e 100644
>>>> --- a/drivers/staging/media/hantro/hantro.h
>>>> +++ b/drivers/staging/media/hantro/hantro.h
>>>> @@ -13,6 +13,7 @@
>>>> #define HANTRO_H_
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> #include <linux/platform_device.h>
>>>> +#include <linux/regmap.h>
>>>> #include <linux/videodev2.h>
>>>> #include <linux/wait.h>
>>>> #include <linux/clk.h>
>>>> @@ -167,7 +168,7 @@ hantro_vdev_to_func(struct video_device *vdev)
>>>> * @reg_bases: Mapped addresses of VPU registers.
>>>> * @enc_base: Mapped address of VPU encoder register for convenience.
>>>> * @dec_base: Mapped address of VPU decoder register for convenience.
>>>> - * @ctrl_base: Mapped address of VPU control block.
>>>> + * @ctrl_base: Regmap of VPU control block.
>>>> * @vpu_mutex: Mutex to synchronize V4L2 calls.
>>>> * @irqlock: Spinlock to synchronize access to data structures
>>>> * shared with interrupt handlers.
>>>> @@ -186,7 +187,7 @@ struct hantro_dev {
>>>> void __iomem **reg_bases;
>>>> void __iomem *enc_base;
>>>> void __iomem *dec_base;
>>>> - void __iomem *ctrl_base;
>>>> + struct regmap *ctrl_base;
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> struct mutex vpu_mutex; /* video_device lock */
>>>> spinlock_t irqlock;
>>>> diff --git a/drivers/staging/media/hantro/imx8m_vpu_hw.c b/drivers/staging/media/hantro/imx8m_vpu_hw.c
>>>> index c222de075ef4..8d0c3425234b 100644
>>>> --- a/drivers/staging/media/hantro/imx8m_vpu_hw.c
>>>> +++ b/drivers/staging/media/hantro/imx8m_vpu_hw.c
>>>> @@ -7,6 +7,7 @@
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> #include <linux/clk.h>
>>>> #include <linux/delay.h>
>>>> +#include <linux/mfd/syscon.h>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> #include "hantro.h"
>>>> #include "hantro_jpeg.h"
>>>> @@ -24,30 +25,28 @@
>>>> #define CTRL_G1_PP_FUSE 0x0c
>>>> #define CTRL_G2_DEC_FUSE 0x10
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> +static const struct regmap_config ctrl_regmap_ctrl = {
>>>> + .reg_bits = 32,
>>>> + .val_bits = 32,
>>>> + .reg_stride = 0x14,
>>>> +};
>>>> +
>>>> static void imx8m_soft_reset(struct hantro_dev *vpu, u32 reset_bits)
>>>> {
>>>> - u32 val;
>>>> -
>>>> /* Assert */
>>>> - val = readl(vpu->ctrl_base + CTRL_SOFT_RESET);
>>>> - val &= ~reset_bits;
>>>> - writel(val, vpu->ctrl_base + CTRL_SOFT_RESET);
>>>> + regmap_update_bits(vpu->ctrl_base, CTRL_SOFT_RESET, reset_bits, 0);
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> udelay(2);
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> /* Release */
>>>> - val = readl(vpu->ctrl_base + CTRL_SOFT_RESET);
>>>> - val |= reset_bits;
>>>> - writel(val, vpu->ctrl_base + CTRL_SOFT_RESET);
>>>> + regmap_update_bits(vpu->ctrl_base, CTRL_SOFT_RESET,
>>>> + reset_bits, reset_bits);
>>>> }
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> static void imx8m_clk_enable(struct hantro_dev *vpu, u32 clock_bits)
>>>> {
>>>> - u32 val;
>>>> -
>>>> - val = readl(vpu->ctrl_base + CTRL_CLOCK_ENABLE);
>>>> - val |= clock_bits;
>>>> - writel(val, vpu->ctrl_base + CTRL_CLOCK_ENABLE);
>>>> + regmap_update_bits(vpu->ctrl_base, CTRL_CLOCK_ENABLE,
>>>> + clock_bits, clock_bits);
>>>> }
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> static int imx8mq_runtime_resume(struct hantro_dev *vpu)
>>>> @@ -64,9 +63,9 @@ static int imx8mq_runtime_resume(struct hantro_dev *vpu)
>>>> imx8m_clk_enable(vpu, CLOCK_G1 | CLOCK_G2);
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> /* Set values of the fuse registers */
>>>> - writel(0xffffffff, vpu->ctrl_base + CTRL_G1_DEC_FUSE);
>>>> - writel(0xffffffff, vpu->ctrl_base + CTRL_G1_PP_FUSE);
>>>> - writel(0xffffffff, vpu->ctrl_base + CTRL_G2_DEC_FUSE);
>>>> + regmap_write(vpu->ctrl_base, CTRL_G1_DEC_FUSE, 0xffffffff);
>>>> + regmap_write(vpu->ctrl_base, CTRL_G1_PP_FUSE, 0xffffffff);
>>>> + regmap_write(vpu->ctrl_base, CTRL_G2_DEC_FUSE, 0xffffffff);
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> clk_bulk_disable_unprepare(vpu->variant->num_clocks, vpu->clocks);
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> @@ -150,8 +149,22 @@ static irqreturn_t imx8m_vpu_g1_irq(int irq, void *dev_id)
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> static int imx8mq_vpu_hw_init(struct hantro_dev *vpu)
>>>> {
>>>> - vpu->dec_base = vpu->reg_bases[0];
>>>> - vpu->ctrl_base = vpu->reg_bases[vpu->variant->num_regs - 1];
>>>> + struct device_node *np = vpu->dev->of_node;
>>>> +
>>>> + vpu->ctrl_base = syscon_regmap_lookup_by_phandle(np, "nxp,imx8m-vpu-ctrl");
>>>> + if (IS_ERR(vpu->ctrl_base)) {
>>>> + struct resource *res;
>>>> + void __iomem *ctrl;
>>>> +
>>>> + res = platform_get_resource_byname(vpu->pdev, IORESOURCE_MEM, "ctrl");
>>>> + ctrl = devm_ioremap_resource(vpu->dev, res);
>>>> + if (IS_ERR(ctrl))
>>>> + return PTR_ERR(ctrl);
>>>> +
>>>> + vpu->ctrl_base = devm_regmap_init_mmio(vpu->dev, ctrl, &ctrl_regmap_ctrl);
>>>> + if (IS_ERR(vpu->ctrl_base))
>>>> + return PTR_ERR(vpu->ctrl_base);
>>>> + }
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> return 0;
>>>> }
>>>> @@ -198,7 +211,6 @@ static const struct hantro_irq imx8mq_irqs[] = {
>>>> };
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> static const char * const imx8mq_clk_names[] = { "g1", "g2", "bus" };
>>>> -static const char * const imx8mq_reg_names[] = { "g1", "g2", "ctrl" };
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> const struct hantro_variant imx8mq_vpu_variant = {
>>>> .dec_fmts = imx8m_vpu_dec_fmts,
>>>> @@ -215,6 +227,4 @@ const struct hantro_variant imx8mq_vpu_variant = {
>>>> .num_irqs = ARRAY_SIZE(imx8mq_irqs),
>>>> .clk_names = imx8mq_clk_names,
>>>> .num_clocks = ARRAY_SIZE(imx8mq_clk_names),
>>>> - .reg_names = imx8mq_reg_names,
>>>> - .num_regs = ARRAY_SIZE(imx8mq_reg_names)
>>>> };
>>>
>
>
More information about the Linux-rockchip
mailing list