[PATCH] arm64: dts: rockchip: Use only supported PCIe link speed on rk3399

[Peter Robinson]

The max link speed supported by the rk3399 is already set in the
rk3399.dtsi file so don't set unsupported link speeds in device
specific DTs. This is the same fix as 642fb27.

Signed-off-by: Peter Robinson <pbrobinson at gmail.com>
---
 arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi      | 1 -
 arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi    | 1 -
 arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi | 1 -
 3 files changed, 3 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
index 48ed4aaa37f3..476787027e03 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
@@ -504,7 +504,6 @@ &pcie_phy {
 };
 
 &pcie0 {
-	max-link-speed = <2>;
 	num-lanes = <2>;
 	vpcie0v9-supply = <&vcca0v9_s3>;
 	vpcie1v8-supply = <&vcca1v8_s3>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
index fb7599f07af4..17ba7c3d9a9c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
@@ -469,7 +469,6 @@ &pcie_phy {
 
 &pcie0 {
 	ep-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>;
-	max-link-speed = <2>;
 	num-lanes = <4>;
 	pinctrl-0 = <&pcie_clkreqnb_cpm>;
 	pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
index 7257494d2831..bc385ad45a13 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
@@ -324,7 +324,6 @@ &pcie_phy {
 
 &pcie0 {
 	ep-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
-	max-link-speed = <2>;
 	num-lanes = <4>;
 	pinctrl-0 = <&pcie_clkreqnb_cpm>;
 	pinctrl-names = "default";
-- 
2.31.1