[PATCH 1/9] i2c: stm32: Simplify with dev_err_probe()

[Krzysztof Kozlowski]

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and the error value gets printed.

Signed-off-by: Krzysztof Kozlowski <krzk at kernel.org>
---
 drivers/i2c/busses/i2c-stm32.c   | 11 ++++-------
 drivers/i2c/busses/i2c-stm32f4.c |  6 ++----
 drivers/i2c/busses/i2c-stm32f7.c | 24 +++++++++---------------
 3 files changed, 15 insertions(+), 26 deletions(-)

diff --git a/drivers/i2c/busses/i2c-stm32.c b/drivers/i2c/busses/i2c-stm32.c
index 3f69a3bb6119..198f848b7be9 100644
--- a/drivers/i2c/busses/i2c-stm32.c
+++ b/drivers/i2c/busses/i2c-stm32.c
@@ -25,9 +25,8 @@ struct stm32_i2c_dma *stm32_i2c_dma_request(struct device *dev,
 	/* Request and configure I2C TX dma channel */
 	dma->chan_tx = dma_request_chan(dev, "tx");
 	if (IS_ERR(dma->chan_tx)) {
-		ret = PTR_ERR(dma->chan_tx);
-		if (ret != -EPROBE_DEFER)
-			dev_err(dev, "can't request DMA tx channel\n");
+		ret = dev_err_probe(dev, PTR_ERR(dma->chan_tx),
+				    "can't request DMA tx channel\n");
 		goto fail_al;
 	}
 
@@ -45,10 +44,8 @@ struct stm32_i2c_dma *stm32_i2c_dma_request(struct device *dev,
 	/* Request and configure I2C RX dma channel */
 	dma->chan_rx = dma_request_chan(dev, "rx");
 	if (IS_ERR(dma->chan_rx)) {
-		ret = PTR_ERR(dma->chan_rx);
-		if (ret != -EPROBE_DEFER)
-			dev_err(dev, "can't request DMA rx channel\n");
-
+		ret = dev_err_probe(dev, PTR_ERR(dma->chan_rx),
+				    "can't request DMA rx channel\n");
 		goto fail_tx;
 	}
 
diff --git a/drivers/i2c/busses/i2c-stm32f4.c b/drivers/i2c/busses/i2c-stm32f4.c
index 48e269284369..937c2c8fd349 100644
--- a/drivers/i2c/busses/i2c-stm32f4.c
+++ b/drivers/i2c/busses/i2c-stm32f4.c
@@ -797,10 +797,8 @@ static int stm32f4_i2c_probe(struct platform_device *pdev)
 
 	rst = devm_reset_control_get_exclusive(&pdev->dev, NULL);
 	if (IS_ERR(rst)) {
-		ret = PTR_ERR(rst);
-		if (ret != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "Error: Missing reset ctrl\n");
-
+		ret = dev_err_probe(&pdev->dev, PTR_ERR(rst),
+				    "Error: Missing reset ctrl\n");
 		goto clk_free;
 	}
 	reset_control_assert(rst);
diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
index bff3479fe122..a8f1758e4c5b 100644
--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -1968,11 +1968,9 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
 						    "wakeup-source");
 
 	i2c_dev->clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(i2c_dev->clk)) {
-		if (PTR_ERR(i2c_dev->clk) != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "Failed to get controller clock\n");
-		return PTR_ERR(i2c_dev->clk);
-	}
+	if (IS_ERR(i2c_dev->clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(i2c_dev->clk),
+				     "Failed to get controller clock\n");
 
 	ret = clk_prepare_enable(i2c_dev->clk);
 	if (ret) {
@@ -1982,10 +1980,8 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
 
 	rst = devm_reset_control_get(&pdev->dev, NULL);
 	if (IS_ERR(rst)) {
-		ret = PTR_ERR(rst);
-		if (ret != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "Error: Missing reset ctrl\n");
-
+		ret = dev_err_probe(&pdev->dev, PTR_ERR(rst),
+				    "Error: Missing reset ctrl\n");
 		goto clk_free;
 	}
 	reset_control_assert(rst);
@@ -2052,13 +2048,11 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
 	i2c_dev->dma = stm32_i2c_dma_request(i2c_dev->dev, phy_addr,
 					     STM32F7_I2C_TXDR,
 					     STM32F7_I2C_RXDR);
-	if (PTR_ERR(i2c_dev->dma) == -ENODEV)
+	if (PTR_ERR(i2c_dev->dma) == -ENODEV) {
 		i2c_dev->dma = NULL;
-	else if (IS_ERR(i2c_dev->dma)) {
-		ret = PTR_ERR(i2c_dev->dma);
-		if (ret != -EPROBE_DEFER)
-			dev_err(&pdev->dev,
-				"Failed to request dma error %i\n", ret);
+	} else if (IS_ERR(i2c_dev->dma)) {
+		ret = dev_err_probe(&pdev->dev, PTR_ERR(i2c_dev->dma),
+				    "Failed to request dma error\n");
 		goto fmp_clear;
 	}
 
-- 
2.17.1