[PATCH 2/4] usb: dwc3: add rockchip innosilicon usb3 glue layer
Peter Geis
pgwipeout at gmail.com
Mon Nov 16 10:17:34 EST 2020
This adds the handler glue for the rockchip usb3 innosilicon phy driver.
This driver attaches to the phy driver through the notification system.
When a usb2 disconnect event occurs this driver tears down the hcd and rebuilds it manually.
This is to work around the usb2 controller becoming wedged and not detecting any usb2 devices after a usb2 hub is removed.
It is based off work originally done by rockchip.
Signed-off-by: Peter Geis <pgwipeout at gmail.com>
---
drivers/usb/dwc3/Kconfig | 10 +
drivers/usb/dwc3/Makefile | 1 +
drivers/usb/dwc3/dwc3-rockchip-inno.c | 271 ++++++++++++++++++++++++++
3 files changed, 282 insertions(+)
create mode 100644 drivers/usb/dwc3/dwc3-rockchip-inno.c
diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
index 7a2304565a73..2e33a45f55ff 100644
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -139,4 +139,14 @@ config USB_DWC3_QCOM
for peripheral mode support.
Say 'Y' or 'M' if you have one such device.
+config USB_DWC3_ROCKCHIP_INNO
+ tristate "Rockchip Platforms with INNO PHY"
+ depends on OF && COMMON_CLK && ARCH_ROCKCHIP
+ depends on USB=y || USB=USB_DWC3
+ default USB_DWC3
+ help
+ Support of USB2/3 functionality in Rockchip platforms
+ with INNO USB 3.0 PHY IP inside.
+ say 'Y' or 'M' if you have one such device.
+
endif
diff --git a/drivers/usb/dwc3/Makefile b/drivers/usb/dwc3/Makefile
index ae86da0dc5bd..f5eb7de10128 100644
--- a/drivers/usb/dwc3/Makefile
+++ b/drivers/usb/dwc3/Makefile
@@ -51,3 +51,4 @@ obj-$(CONFIG_USB_DWC3_MESON_G12A) += dwc3-meson-g12a.o
obj-$(CONFIG_USB_DWC3_OF_SIMPLE) += dwc3-of-simple.o
obj-$(CONFIG_USB_DWC3_ST) += dwc3-st.o
obj-$(CONFIG_USB_DWC3_QCOM) += dwc3-qcom.o
+obj-$(CONFIG_USB_DWC3_ROCKCHIP_INNO) += dwc3-rockchip-inno.o
diff --git a/drivers/usb/dwc3/dwc3-rockchip-inno.c b/drivers/usb/dwc3/dwc3-rockchip-inno.c
new file mode 100644
index 000000000000..7007ddbcbdae
--- /dev/null
+++ b/drivers/usb/dwc3/dwc3-rockchip-inno.c
@@ -0,0 +1,271 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dwc3-rockchip-inno.c - DWC3 glue layer for Rockchip devices with Innosilicon based PHY
+ *
+ * Based on dwc3-of-simple.c
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/clk.h>
+#include <linux/notifier.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/pm_runtime.h>
+#include <linux/reset.h>
+
+#include <linux/workqueue.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/usb/phy.h>
+
+#include "core.h"
+#include "../host/xhci.h"
+
+
+struct dwc3_rk_inno {
+ struct device *dev;
+ struct clk_bulk_data *clks;
+ struct dwc3 *dwc;
+ struct usb_phy *phy;
+ struct notifier_block reset_nb;
+ struct work_struct reset_work;
+ struct mutex lock;
+ int num_clocks;
+ struct reset_control *resets;
+};
+
+static int dwc3_rk_inno_host_reset_notifier(struct notifier_block *nb, unsigned long event, void *data)
+{
+ struct dwc3_rk_inno *rk_inno = container_of(nb, struct dwc3_rk_inno, reset_nb);
+
+ schedule_work(&rk_inno->reset_work);
+
+ return NOTIFY_DONE;
+}
+
+static void dwc3_rk_inno_host_reset_work(struct work_struct *work)
+{
+ struct dwc3_rk_inno *rk_inno = container_of(work, struct dwc3_rk_inno, reset_work);
+ struct usb_hcd *hcd = dev_get_drvdata(&rk_inno->dwc->xhci->dev);
+ struct usb_hcd *shared_hcd = hcd->shared_hcd;
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ unsigned int count = 0;
+
+ mutex_lock(&rk_inno->lock);
+
+ if (hcd->state != HC_STATE_HALT) {
+ usb_remove_hcd(shared_hcd);
+ usb_remove_hcd(hcd);
+ }
+
+ if (rk_inno->phy)
+ usb_phy_shutdown(rk_inno->phy);
+
+ while (hcd->state != HC_STATE_HALT) {
+ if (++count > 1000) {
+ dev_err(rk_inno->dev, "wait for HCD remove 1s timeout!\n");
+ break;
+ }
+ usleep_range(1000, 1100);
+ }
+
+ if (hcd->state == HC_STATE_HALT) {
+ xhci->shared_hcd = shared_hcd;
+ usb_add_hcd(hcd, hcd->irq, IRQF_SHARED);
+ usb_add_hcd(shared_hcd, hcd->irq, IRQF_SHARED);
+ }
+
+ if (rk_inno->phy)
+ usb_phy_init(rk_inno->phy);
+
+ mutex_unlock(&rk_inno->lock);
+ dev_dbg(rk_inno->dev, "host reset complete\n");
+}
+
+static int dwc3_rk_inno_probe(struct platform_device *pdev)
+{
+ struct dwc3_rk_inno *rk_inno;
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node, *child, *node;
+ struct platform_device *child_pdev;
+
+ int ret;
+
+ rk_inno = devm_kzalloc(dev, sizeof(*rk_inno), GFP_KERNEL);
+ if (!rk_inno)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, rk_inno);
+ rk_inno->dev = dev;
+
+ rk_inno->resets = of_reset_control_array_get(np, false, true,
+ true);
+ if (IS_ERR(rk_inno->resets)) {
+ ret = PTR_ERR(rk_inno->resets);
+ dev_err(dev, "failed to get device resets, err=%d\n", ret);
+ return ret;
+ }
+
+ ret = reset_control_deassert(rk_inno->resets);
+ if (ret)
+ goto err_resetc_put;
+
+ ret = clk_bulk_get_all(rk_inno->dev, &rk_inno->clks);
+ if (ret < 0)
+ goto err_resetc_assert;
+
+ rk_inno->num_clocks = ret;
+ ret = clk_bulk_prepare_enable(rk_inno->num_clocks, rk_inno->clks);
+ if (ret)
+ goto err_resetc_assert;
+
+ ret = of_platform_populate(np, NULL, NULL, dev);
+ if (ret)
+ goto err_clk_put;
+
+ child = of_get_child_by_name(np, "dwc3");
+ if (!child) {
+ dev_err(dev, "failed to find dwc3 core node\n");
+ ret = -ENODEV;
+ goto err_plat_depopulate;
+ }
+
+ child_pdev = of_find_device_by_node(child);
+ if (!child_pdev) {
+ dev_err(dev, "failed to get dwc3 core device\n");
+ ret = -ENODEV;
+ goto err_plat_depopulate;
+ }
+
+ rk_inno->dwc = platform_get_drvdata(child_pdev);
+ if (!rk_inno->dwc || !rk_inno->dwc->xhci) {
+ ret = -EPROBE_DEFER;
+ goto err_plat_depopulate;
+ }
+
+ node = of_parse_phandle(child, "usb-phy", 0);
+ INIT_WORK(&rk_inno->reset_work, dwc3_rk_inno_host_reset_work);
+ rk_inno->reset_nb.notifier_call = dwc3_rk_inno_host_reset_notifier;
+ rk_inno->phy = devm_usb_get_phy_by_node(dev, node, &rk_inno->reset_nb);
+ of_node_put(node);
+ mutex_init(&rk_inno->lock);
+
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+ pm_runtime_get_sync(dev);
+
+ return 0;
+
+err_plat_depopulate:
+ of_platform_depopulate(dev);
+
+err_clk_put:
+ clk_bulk_disable_unprepare(rk_inno->num_clocks, rk_inno->clks);
+ clk_bulk_put_all(rk_inno->num_clocks, rk_inno->clks);
+
+err_resetc_assert:
+ reset_control_assert(rk_inno->resets);
+
+err_resetc_put:
+ reset_control_put(rk_inno->resets);
+ return ret;
+}
+
+static void __dwc3_rk_inno_teardown(struct dwc3_rk_inno *rk_inno)
+{
+ of_platform_depopulate(rk_inno->dev);
+
+ clk_bulk_disable_unprepare(rk_inno->num_clocks, rk_inno->clks);
+ clk_bulk_put_all(rk_inno->num_clocks, rk_inno->clks);
+ rk_inno->num_clocks = 0;
+
+ reset_control_assert(rk_inno->resets);
+
+ reset_control_put(rk_inno->resets);
+
+ pm_runtime_disable(rk_inno->dev);
+ pm_runtime_put_noidle(rk_inno->dev);
+ pm_runtime_set_suspended(rk_inno->dev);
+}
+
+static int dwc3_rk_inno_remove(struct platform_device *pdev)
+{
+ struct dwc3_rk_inno *rk_inno = platform_get_drvdata(pdev);
+
+ __dwc3_rk_inno_teardown(rk_inno);
+
+ return 0;
+}
+
+static void dwc3_rk_inno_shutdown(struct platform_device *pdev)
+{
+ struct dwc3_rk_inno *rk_inno = platform_get_drvdata(pdev);
+
+ __dwc3_rk_inno_teardown(rk_inno);
+}
+
+static int __maybe_unused dwc3_rk_inno_runtime_suspend(struct device *dev)
+{
+ struct dwc3_rk_inno *rk_inno = dev_get_drvdata(dev);
+
+ clk_bulk_disable(rk_inno->num_clocks, rk_inno->clks);
+
+ return 0;
+}
+
+static int __maybe_unused dwc3_rk_inno_runtime_resume(struct device *dev)
+{
+ struct dwc3_rk_inno *rk_inno = dev_get_drvdata(dev);
+
+ return clk_bulk_enable(rk_inno->num_clocks, rk_inno->clks);
+}
+
+static int __maybe_unused dwc3_rk_inno_suspend(struct device *dev)
+{
+ struct dwc3_rk_inno *rk_inno = dev_get_drvdata(dev);
+
+ reset_control_assert(rk_inno->resets);
+
+ return 0;
+}
+
+static int __maybe_unused dwc3_rk_inno_resume(struct device *dev)
+{
+ struct dwc3_rk_inno *rk_inno = dev_get_drvdata(dev);
+
+ reset_control_deassert(rk_inno->resets);
+
+ return 0;
+}
+
+static const struct dev_pm_ops dwc3_rk_inno_dev_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(dwc3_rk_inno_suspend, dwc3_rk_inno_resume)
+ SET_RUNTIME_PM_OPS(dwc3_rk_inno_runtime_suspend,
+ dwc3_rk_inno_runtime_resume, NULL)
+};
+
+static const struct of_device_id of_dwc3_rk_inno_match[] = {
+ { .compatible = "rockchip,rk3328-dwc3" },
+ { /* Sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, of_dwc3_rk_inno_match);
+
+static struct platform_driver dwc3_rk_inno_driver = {
+ .probe = dwc3_rk_inno_probe,
+ .remove = dwc3_rk_inno_remove,
+ .shutdown = dwc3_rk_inno_shutdown,
+ .driver = {
+ .name = "dwc3-rk-inno",
+ .of_match_table = of_dwc3_rk_inno_match,
+ .pm = &dwc3_rk_inno_dev_pm_ops,
+ },
+};
+
+module_platform_driver(dwc3_rk_inno_driver);
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("DesignWare USB3 Rockchip Innosilicon Glue Layer");
+MODULE_AUTHOR("Peter Geis <pgwipeout at gmail.com>");
--
2.25.1
More information about the Linux-rockchip
mailing list