[PATCH 6/9] arm64: dts: rockchip: px30-engicam: Add BT support

Jagan Teki jagan at amarulasolutions.com
Mon Nov 9 13:10:14 EST 2020


From: Suniel Mahesh <sunil at amarulasolutions.com>

Engicam PX30 carrier boards like EDIMM2.2 and C.TOUCH2.0 have
an onboard Sterling-LWD Wifi/BT chip based on BCM43430 connected
on the UART bus.

UART bus on the design routed via USB to UART CP20x bridge. This
bridge powered from 3V3 regualtor gpio.

This patch adds BT enablement nodes for these respective boards.

Signed-off-by: Michael Trimarchi <michael at amarulasolutions.com>
Signed-off-by: Suniel Mahesh <sunil at amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
 .../arm64/boot/dts/rockchip/px30-engicam-common.dtsi | 12 ++++++++++++
 .../boot/dts/rockchip/px30-engicam-ctouch2.dtsi      | 10 ++++++++++
 .../dts/rockchip/px30-engicam-px30-core-edimm2.2.dts | 10 ++++++++++
 3 files changed, 32 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi b/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi
index 92681ccf50f1..eb2be7893863 100644
--- a/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi
@@ -40,6 +40,18 @@ sdio_pwrseq: sdio-pwrseq {
 		pinctrl-names = "default";
 		pinctrl-0 = <&wifi_enable_h>;
 	};
+
+	vcc3v3_btreg: vcc3v3-btreg {
+		compatible = "regulator-gpio";
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_enable_h>;
+		regulator-name = "btreg-gpio-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		states = <3300000 0x0>;
+	};
 };
 
 &sdio {
diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-ctouch2.dtsi b/arch/arm64/boot/dts/rockchip/px30-engicam-ctouch2.dtsi
index d5708779c285..bf10a3d29fca 100644
--- a/arch/arm64/boot/dts/rockchip/px30-engicam-ctouch2.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30-engicam-ctouch2.dtsi
@@ -8,6 +8,12 @@
 #include "px30-engicam-common.dtsi"
 
 &pinctrl {
+	bt {
+		bt_enable_h: bt-enable-h {
+			rockchip,pins = <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	sdio-pwrseq {
 		wifi_enable_h: wifi-enable-h {
 			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -18,3 +24,7 @@ wifi_enable_h: wifi-enable-h {
 &sdio_pwrseq {
 	reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
 };
+
+&vcc3v3_btreg {
+	enable-gpio = <&gpio1 RK_PC3 GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core-edimm2.2.dts b/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core-edimm2.2.dts
index 913444548b59..d759478e1c84 100644
--- a/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core-edimm2.2.dts
+++ b/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core-edimm2.2.dts
@@ -21,6 +21,12 @@ chosen {
 };
 
 &pinctrl {
+	bt {
+		bt_enable_h: bt-enable-h {
+			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	sdio-pwrseq {
 		wifi_enable_h: wifi-enable-h {
 			rockchip,pins = <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -31,3 +37,7 @@ wifi_enable_h: wifi-enable-h {
 &sdio_pwrseq {
 	reset-gpios = <&gpio1 RK_PC3 GPIO_ACTIVE_LOW>;
 };
+
+&vcc3v3_btreg {
+	enable-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
+};
-- 
2.25.1




More information about the Linux-rockchip mailing list