[PATCH v7 00/11] Stop monitoring disabled devices

[Daniel Lezcano]

On 30/06/2020 18:56, Andrzej Pietrasiewicz wrote:
> Hi,
> 
> W dniu 30.06.2020 o 17:53, Daniel Lezcano pisze:
>> On 30/06/2020 17:29, Andrzej Pietrasiewicz wrote:
>>> Hi Daniel,
>>>
>>> W dniu 30.06.2020 o 16:53, Daniel Lezcano pisze:
>>>> On 30/06/2020 15:43, Andrzej Pietrasiewicz wrote:
>>>>> Hi Daniel,
>>>>>
>>>>> I am reading the logs and can't find anything specific to thermal.
>>>>>
>>>>> What I can see is
>>>>>
>>>>> "random: crng init done"
>>>>>
>>>>> with large times (~200s) and then e.g.
>>>>>
>>>>> 'auto-login-action timed out after 283 seconds'
>>>>>
>>>>> I'm looking at e.g.
>>>>> https://storage.kernelci.org/thermal/testing/v5.8-rc3-11-gf5e50bf4d3ef/arm/multi_v7_defconfig/gcc-8/lab-baylibre/baseline-imx6q-sabrelite.html
>>>>>
>>>>>
>>>>>
>>>
>>> f5e50bf4d3ef is PATCH 11/11. Does the problem happen at PATCH 1-10/11?
>>> PATCH 11/11 renames a method and the code compiles, so it seems
>>> unlikely that this is causing problems. One should never say never,
>>> though ;)
>>
>> The sha1 is just the HEAD for the kernel reference. The regression
>> happens with your series, somewhere.
>>
>>> The reported failure is not due to some test failing but rather due
>>> to timeout logging into the test system. Could it be that there is
>>> some other problem?
>>
>> I did reproduce:
>>
>> v5.8-rc3 + series => imx6 hang at boot time
>> v5.8-rc3 => imx6 boots correctly
>>
> 
> I kindly ask for a bisect.

I will give a try but it is a very long process as the board is running
on kernelci.

I was not able to reproduce it on imx7 despite it is the same sensor :/


-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog