[PATCH] clk: rockchip: mark pclk_uart2 as critical on rk3328
Johan Jonker
jbx6244 at gmail.com
Wed Jul 8 12:28:40 EDT 2020
Hi Robin and others,
Just a clarification.
Test is done on rk3318 A95X Z2 that uses rk3328.dtsi.
Almost everything works fine now except for uart2.
Front display also works now with ported custom vfd driver for the
SM1628 clone used.
When I include a printk function for debugging in
clk_disable_unused_subtree I get this list of disabled clocks below.
Could you list the rk3328 clocks that are turned off? Is there a difference?
boot options including:
earlycon=uart8250,mmio32,0xff130000,keep
console=ttyS2,1500000n8
But the real console in which one can type ends up on ttyUSB0.
Without console defined in the command line it's only usb keyboard and
hdmi monitor. Output on ttyS2 stops right after:
[ 1.309231] C:pclk_uart2 -> pclk_bus
To see more I have to include clk_ignore_unused to the command line.
In clk-px30.c they also included pclk_uart2 to the critical list.
Could Elaine Zhang give more info on that?
Kind regards,
Johan Jonker
static void __init clk_disable_unused_subtree(struct clk_core *core)
{
struct clk_core *child;
unsigned long flags;
lockdep_assert_held(&prepare_lock);
hlist_for_each_entry(child, &core->children, child_node)
clk_disable_unused_subtree(child);
if (core->flags & CLK_OPS_PARENT_ENABLE)
clk_core_prepare_enable(core->parent);
if (clk_pm_runtime_get(core))
goto unprepare_out;
flags = clk_enable_lock();
if (core->enable_count)
goto unlock_out;
if (core->flags & CLK_IGNORE_UNUSED)
goto unlock_out;
/*
* some gate clocks have special needs during the disable-unused
* sequence. call .disable_unused if available, otherwise fall
* back to .disable
*/
if (clk_core_is_enabled(core)) {
trace_clk_disable(core);
////////////
// >>> Include debug here <<<
printk("C:%s -> %s\n", core->name, core->parent ? core->parent->name :
"*");
////////////
if (core->ops->disable_unused)
core->ops->disable_unused(core->hw);
else if (core->ops->disable)
core->ops->disable(core->hw);
trace_clk_disable_complete(core);
}
unlock_out:
clk_enable_unlock(flags);
clk_pm_runtime_put(core);
unprepare_out:
if (core->flags & CLK_OPS_PARENT_ENABLE)
clk_core_disable_unprepare(core->parent);
}
label kernel
kernel /Image-CLK
fdt /rk3318-a95x-z2-CYX-led.dtb
append root=/dev/mmcblk0p5 console=tty0 console=ttyUSB0,115200n8
console=ttyS2,1500000n8 initcall_debug=1 debug drm.debug=0xe
earlycon=uart8250,mmio32,0xff130000,keep swiotlb=1 kpti=0
no_console_suspend=1 consoleblank=0 rootwait
[ 1.282096] calling clk_disable_unused+0x0/0x110 @ 1
[ 1.282705] C:sclk_timer5 -> xin24m
[ 1.283115] C:sclk_timer4 -> xin24m
[ 1.283524] C:sclk_timer3 -> xin24m
[ 1.283932] C:sclk_timer2 -> xin24m
[ 1.284340] C:sclk_timer1 -> xin24m
[ 1.284748] C:sclk_timer0 -> xin24m
[ 1.285158] C:clk_otp -> xin24m
[ 1.285536] C:aclk_mac2io -> aclk_gmac
[ 1.286035] C:pclk_mac2io -> pclk_gmac
[ 1.286483] C:clk_rga -> gpll
[ 1.286834] C:aclk_gpu -> aclk_gpu_pre
[ 1.287284] C:aclk_tsp -> aclk_bus_pre
[ 1.287723] C:aclk_dcf -> aclk_bus_pre
[ 1.288162] C:pclk_acodecphy -> pclk_phy_pre
[ 1.295372] C:pclk_dcf -> pclk_bus
[ 1.309231] C:pclk_uart2 -> pclk_bus
[ 1.322902] C:pclk_uart1 -> pclk_bus
[ 1.329133] C:pclk_uart0 -> pclk_bus
[ 1.335230] C:pclk_spi -> pclk_bus
[ 1.341538] C:pclk_stimer -> pclk_bus
[ 1.341543] C:pclk_i2c3 -> pclk_bus
[ 1.341547] C:pclk_i2c2 -> pclk_bus
[ 1.341551] C:pclk_i2c1 -> pclk_bus
[ 1.341554] C:pclk_i2c0 -> pclk_bus
[ 1.341562] C:hclk_pdm -> hclk_bus_pre
[ 1.341566] C:hclk_crypto_slv -> hclk_bus_pre
[ 1.341574] C:hclk_crypto_mst -> hclk_bus_pre
[ 1.395518] C:hclk_tsp -> hclk_bus_pre
[ 1.401131] C:hclk_spdif_8ch -> hclk_bus_pre
[ 1.406791] C:hclk_i2s2_2ch -> hclk_bus_pre
[ 1.421229] C:hclk_i2s1_8ch -> hclk_bus_pre
[ 1.426642] C:hclk_i2s0_8ch -> hclk_bus_pre
[ 1.431878] C:clk_wifi -> cpll
[ 1.436987] C:sclk_vdec_core -> cpll
[ 1.442045] C:sclk_vdec_cabac -> cpll
[ 1.446982] C:aclk_rga -> aclk_rga_pre
[ 1.451825] C:aclk_hdcp -> aclk_vio_pre
[ 1.456574] C:aclk_cif -> aclk_vio_pre
[ 1.461226] C:aclk_iep -> aclk_vio_pre
[ 1.465794] C:pclk_hdcp -> hclk_vio_pre
[ 1.470401] C:hclk_hdcp -> hclk_vio_pre
[ 1.470406] C:hclk_rga -> hclk_vio_pre
[ 1.470411] C:hclk_cif -> hclk_vio_pre
[ 1.470415] C:hclk_iep -> hclk_vio_pre
[ 1.470424] C:clk_mac2io_out -> cpll
[ 1.470432] C:clk_mac2io_ref -> clk_mac2io
[ 1.470440] C:clk_mac2io_rx -> clk_mac2io
[ 1.507448] C:clk_mac2io_tx -> clk_mac2io
[ 1.511778] C:clk_mac2io_refout -> clk_mac2io
[ 1.516094] C:clk_mac2io_src -> cpll
[ 1.520315] C:clk_ref_usb3otg_src -> cpll
[ 1.524560] C:clk_sdmmc_ext -> cpll
[ 1.528701] C:hclk_sdmmc_ext -> hclk_peri
[ 1.532850] C:clk_cif_src -> cpll
[ 1.536945] C:sclk_venc_dsp -> cpll
[ 1.541006] C:sclk_venc_core -> cpll
[ 1.544972] C:aclk_h264 -> aclk_rkvenc
[ 1.548936] C:aclk_h265 -> aclk_rkvenc
[ 1.552794] C:hclk_h264 -> hclk_rkvenc
[ 1.556580] C:pclk_h265 -> hclk_rkvenc
[ 1.560373] C:aclk_rkvdec -> aclk_rkvdec_pre
[ 1.564227] C:hclk_rkvdec -> hclk_rkvdec_pre
[ 1.568096] C:clk_spi -> cpll
[ 1.571981] C:clk_crypto -> cpll
[ 1.575897] C:clk_i2c3 -> cpll
[ 1.579795] C:clk_i2c2 -> cpll
[ 1.583657] C:clk_i2c1 -> cpll
[ 1.587521] C:clk_i2c0 -> cpll
[ 1.591357] C:i2s2_out -> clk_i2s2
[ 1.595170] C:clk_i2s2 -> i2s2_pre
[ 1.599020] C:i2s1_out -> clk_i2s1
[ 1.602893] C:clk_i2s1 -> i2s1_pre
[ 1.606749] C:clk_i2s0 -> i2s0_pre
[ 1.610519] C:clk_tsp -> cpll
[ 1.614239] C:clk_pdm -> apll
[ 1.617877] C:clk_hsadc_tsp -> *
[ 1.621718] initcall clk_disable_unused+0x0/0x110 returned 0 after
331056 usecs
On 7/8/20 5:34 PM, Robin Murphy wrote:
> On 2020-07-08 15:45, Johan Jonker wrote:
>> The rk3328 uart2 port is used as boot console and to debug.
>> During the boot pclk_uart2 is disabled by a clk_disable_unused
>> initcall. Fix the uart2 function by marking pclk_uart2
>> as critical on rk3328. Also add sclk_uart2 as that is needed
>> for the same DT node.
>
> Hmm, given that those are named in the DT as the "baudclk" and
> "apb_pclk" that dw8250_probe() explicitly claims, they really
> shouldn't be unused :/
>
> On my RK3328 box they appear to be prepared and enabled OK:
>
> [robin at nemulon-9 ~]$ sudo grep uart2 /sys/kernel/debug/clk/clk_summary
> sclk_uart2 1 1 0 24000000 0 0 50000
> pclk_uart2 1 1 0 75000000 0 0 50000
> ...
>
> Robin.
>
>> Signed-off-by: Johan Jonker <jbx6244 at gmail.com>
>> ---
>> drivers/clk/rockchip/clk-rk3328.c | 2 ++
>> 1 file changed, 2 insertions(+)
>>
>> diff --git a/drivers/clk/rockchip/clk-rk3328.c b/drivers/clk/rockchip/clk-rk3328.c
>> index c186a1985..cb7749cb7 100644
>> --- a/drivers/clk/rockchip/clk-rk3328.c
>> +++ b/drivers/clk/rockchip/clk-rk3328.c
>> @@ -875,6 +875,8 @@ static const char *const rk3328_critical_clocks[] __initconst = {
>> "aclk_gmac_niu",
>> "pclk_gmac_niu",
>> "pclk_phy_niu",
>> + "pclk_uart2",
>> + "sclk_uart2",
>> };
>>
>> static void __init rk3328_clk_init(struct device_node *np)
>>
More information about the Linux-rockchip
mailing list