[PATCH v7 00/11] Stop monitoring disabled devices

[Daniel Lezcano]

On 02/07/2020 19:49, Daniel Lezcano wrote:

[ ... ]

>> Thanks!
>>
>> That confirms your suspicions.
>>
>> So the reason is that ->get_temp() is called while the mutex is held and
>> thermal_zone_device_is_enabled() wants to take the same mutex.
> 
> Yes, that's correct.
> 
>> Is adding a comment to thermal_zone_device_is_enabled() to never call
>> it while the mutex is held and adding another version of it which does
>> not take the mutex ok?
> 
> The thermal_zone_device_is_enabled() is only used in two places, acpi
> and this imx driver, and given:
> 
> 1. as soon as the mutex is released, there is no guarantee the thermal
> zone won't be changed right after, the lock is pointless, thus the
> information also.
> 
> 2. from a design point of view, I don't see why a driver should know if
> a thermal zone is disabled or not
> 
> It would make sense to end with this function and do not give the
> different drivers an opportunity to access this information.
> 
> Why not add change_mode for the acpi in order to enable or disable the
> events and for imx_thermal use irq_enabled flag instead of the thermal
> zone mode? Moreover it is very unclear why this function is needed in
> imx_get_temp(), and I suspect we should be able to get rid of it.

If you agree with that you can send a patch on top of your series so I
can test it fixes the imx platform.


-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog