[PATCH v2 1/3] pwm: rockchip: Enable APB clock during register access while probing

Simon South simon at simonsouth.net
Sat Dec 19 15:44:08 EST 2020


Commit 457f74abbed0 ("pwm: rockchip: Keep enabled PWMs running while
probing") modified rockchip_pwm_probe() to access a PWM device's registers
directly to check whether or not the device is running, but did not also
change the function to first enable the device's APB clock to be certain
the device can respond. This risks hanging the kernel on systems with PWM
devices that use more than a single clock.

Avoid this by enabling the device's APB clock before accessing its
registers (and disabling the clock when register access is complete).

Fixes: 457f74abbed0 ("pwm: rockchip: Keep enabled PWMs running while probing")
Reported-by: Thierry Reding <thierry.reding at gmail.com>
Suggested-by: Trent Piepho <tpiepho at gmail.com>
Signed-off-by: Simon South <simon at simonsouth.net>
---
 drivers/pwm/pwm-rockchip.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/pwm/pwm-rockchip.c b/drivers/pwm/pwm-rockchip.c
index 77c23a2c6d71..d2058138ce1e 100644
--- a/drivers/pwm/pwm-rockchip.c
+++ b/drivers/pwm/pwm-rockchip.c
@@ -332,9 +332,9 @@ static int rockchip_pwm_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	ret = clk_prepare(pc->pclk);
+	ret = clk_prepare_enable(pc->pclk);
 	if (ret) {
-		dev_err(&pdev->dev, "Can't prepare APB clk: %d\n", ret);
+		dev_err(&pdev->dev, "Can't enable APB clk: %d\n", ret);
 		goto err_clk;
 	}
 
@@ -364,10 +364,12 @@ static int rockchip_pwm_probe(struct platform_device *pdev)
 	if ((ctrl & enable_conf) != enable_conf)
 		clk_disable(pc->clk);
 
+	clk_disable(pc->pclk);
+
 	return 0;
 
 err_pclk:
-	clk_unprepare(pc->pclk);
+	clk_disable_unprepare(pc->pclk);
 err_clk:
 	clk_disable_unprepare(pc->clk);
 
-- 
2.29.2




More information about the Linux-rockchip mailing list